Statesman Lawn Mower Parts

This grease plug is a genuine OEM replacement part sourced directly from the manufacturer. It is found on snowblowers and other outdoor yard machines on the gearcase assembly, which houses the auger gear. The grease plug seals the oil port on the gearbox. This keeps lubrication inside the gearbox and is the access point for adding more when needed. If this plug is lost, the gearbox's oil could leak out, and contaminants could get into the gearbox.Lubricate the contents of the gearbox before installing the new grease plug. Locate and remove the two screws on the side to drain the gearbox. Install the grease plug in the bottom. Refill the oil using the vent hole. Continue filling until oil is coming out the top side screw. Close everything back up, and the machine is ready for use. To prepare the equipment for long storage, remove the grease plug and check the oil level. If it is not to the top, add more lubricant before sealing the grease plug.This grease plug is made of durable black molded plastic and is sold as an individual unit. It is compatible with snowblowers and snow throwers manufactured by Ryobi, MTD, Yard Machines, Troy-Bilt, Bolens, Yard-Man, Cub Cadet, and Husky.

This tap hex screw is a genuine MTD part, sold individually. A tap hex screw can be used as a replacement part for outdoor appliances including lawn mowers, tillers, and edgers. This is a small fastener.The tap hex screw for one of these outdoor appliances might be subject to damage or to a loss or misplacement that can necessitate the full replacement of the screw. Refer to the manual for detailed instructions.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This tap hex screw is compatible with the following outdoor appliance brands: MTD, Craftsman, Toro, Cub Cadet, Troy-Bilt, Murray, Yard Machines, Huskee, Montgomery Wards, Bolens, Yard Man, Turf King, and MasterCut.

This replacement part is a bolt. This is a genuine replacement part made by MTD. This part is small but important to the overall workings of the machine. Bolts work with other parts such as screws and nuts to ensure that different parts are held in place and are secure during use. A new bolt might be needed if the current one has become loose, is missing, or has been damaged. This can include being dented, bent, or lodged in place. Be sure to replace it as soon as possible if this is the case. This should be a fairly simple repair and only require common household tools such as a screwdriver and pliers. This part is sold individually and is sourced directly from the manufacturer. This is a genuine OEM replacement part.

This hex screw is a genuine MTD part, sold individually. This hex screw can be used as a replacement part in a lawn mower, snowblower, or wood chipper.The hex screw in a lawn mower, snowblower, or wood chipper might have to be replaced if it is lost, misplaced, or damaged. The screw is a small component which can easily disappear while the appliance is in operation without necessarily noticing its absence; additionally, the screw can suffer from puncturing, scraping, denting, warping, or eroding over time. If this occurs, the screw should be replaced by this genuine OEM replacement part.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This hex screw is compatible with the following outdoor appliance brands: MTD, Cub Cadet, Craftsman, Ryobi, Troy-Bilt, Yard Machines, Huskee, Montgomery Wards, Bolens, Yard Man, and MasterCut.

This amp fuse is a genuine MTD part, sold individually. This amp fuse can be used as a replacement part in a lawn mower. The purpose of the amp fuse in a lawn mower is to protect the lawn mower from potential voltage issues and failures that might occur during the general use of the appliance.The amp fuse in a lawn mower might need to be replaced if the component suffers damage or blows out after protecting the appliance from an electrical current voltage overload. If the amp fuse has blown or has suffered damage from general wear and tear with long-term use, the amp fuse should be removed and replaced by this genuine OEM replacement part in order to guarantee continued safe use of the lawn mower by the operator. Always unplug the appliance before performing any kind of repair or replacement.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This amp fuse is compatible with the following outdoor appliance brands: MTD, Cub Cadet, and Troy-Bilt.

This replacement part is a washer. This is a genuine replacement part made by MTD. This particular washer is a very important part of various machinery and appliances. These small parts are able to work together to help ensure the proper functioning of the machine. It also allows for parts to stay in place during use. A new washer might be needed if the current one is missing or damaged. washers can become stripped and might not stay in place after a while. If this is the case it is recommended that it be replaced immediately. This repair should be fairly easy and only require common household tools. Be sure to wear work gloves during this repair. This part is sold individually and is sourced directly from the manufacturer to ensure proper fit. This washer is a genuine OEM replacement part.

This part is a throttle control box assembly. The throttle controls the amount of air or fuel that enters the engine and also controls the speed of the engine. This assembly includes a throttle control knob that allows the user to control the throttle and the speed of the outdoor power equipment machine.A new throttle control box may be needed if any part of the assembly is cracked, broken, or damaged in any way. It's important to remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment machines.This part is a genuine MTD throttle control box assembly and is an OEM part sourced directly from the manufacturer and it is sold individually. This specific throttle control box assembly is compatible with edgers and lawn tractors that are manufactured by MTD, Yard Man, Yard Machines, and Cub Cadet.

This is a genuine OEM chute deflector that is made for use with select lawn mowers and tractors. The chute deflector plays an integral part in keeping the machine running and keeping the user safe. It is designed to deflect the grass clippings and any debris out and away from the blades and the engine of the unit while ensuring that they do not fly back and hit the operator. Although it is made of durable plastic, the chute deflector is known to become damaged over the lifetime of the use of the mower unit. The screws that attach it to the deck could become lost or damaged, which could lead to the chute becoming damaged, as well. It could also be damaged by hitting a stump or rock. In any case, the deflector will need to be replaced before the unit can be safely operated. This genuine OEM replacement will do the job, and is designed to exact standards by MTD. It can also be used with select units from Cub Cadet, Troy-Bilt, and others. It is sold individually and the screws required to attach the chute will require an additional purchase.

This bowed washer is a genuine MTD part, sold individually. This bowed washer can be used as a replacement part in a lawn mower. The purpose of the bowed washer in a lawn mower is to serve as a component within the general fastening mechanisms of the lawn mower so that friction can be reduced between two or more components and spacing is created between the components.The bowed washer in a lawn mower might have to be completely replaced at one or more points within the typical lifespan of the lawn mower; this could occur if the bowed washer is damaged from general wear and tear with long-term use or has been lost or misplaced. If the bowed washer has been stripped away or has fallen out of its place and cannot be found, the bowed washer should be replaced by this genuine OEM replacement part in order to guarantee safe use of the appliance.This is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This bowed washer is compatible with the following outdoor appliance brands: MTD, Cub Cadet, and Craftsman.

This replacement part is a casing clamp. It is a genuine replacement part made by MTD. This part is typically used to secure the governor control plate to the tank assembly.A new casing clamp might be needed if the current one is damaged or missing. Be sure the machine is stationary and the engine is completely powered down before beginning this repair. This part is made of durable metal so that it works properly with the machine at hand. Refer to the owner's guide for more information on this part. This air cleaner is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer to ensure a proper fit.