Statesman Parts

This shoulder screw is a genuine MTD part, sold individually. This shoulder screw can be used as a replacement part in a lawn mower. The purpose of the shoulder screw in a lawn mower is to serve as a fastening component within the internal machinery of the appliance so that when the screw is pierced through and rotated into one or more components, those components are effectively secured in their position within the appliance while the appliance is in operation.The shoulder screw in a lawn mower might need to be replaced if the shoulder screw is lost, misplaced, or damaged as a result of general wear and tear from long-term use. If the shoulder screw is lost at some point within the typical lifespan of a lawn mower, the shoulder screw should be replaced by this genuine OEM replacement part; the same should occur if the screw is stripped away from general use.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This shoulder screw is compatible with the following outdoor appliance brands: MTD, Yard Machines, Montgomery Wards, Yard Man, and MasterCut.

This flange bearing is a genuine MTD part, sold individually. This flange bearing can be used as a replacement part in a lawn mower. The purpose of the flange bearing in a lawn mower is to facilitate both radial and axial loads so that the outer ring of the bearing stays static and stationary while the inner ring rotates around. If this part is damaged, it should be removed and replaced by this genuine OEM replacement part.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This flange bearing is compatible with the following outdoor appliance brands: MTD, Cub Cadet, Yard Machines, and Yard Man.

This is a thrust bearing. The thrust bearing is positioned between the lawn mower's spindle and front axle and serves to reduce friction during use. This part makes shifting between different speeds much easier. A worn-out thrust bearing will have more room between the rollers on the outside of the bearing. This movement will cause the bearing to move more than usual. When the bearing goes bad, the driver may notice rattling, squeaking, or other noises coming from the machine. These noises can be more prevalent when the clutch pedal is engaged. To replace the thrust bearing, first, the clutch must be removed from the lawn mower. On the bottom of the driveshaft, there is a bolt and washer that need to be removed. Wedge and move the clutch, allowing it to work its way down the driveshaft, then remove it. There is a bearing retainer clip and three bolts that will enable the thrust bearing to be removed. Repeat the steps in reverse after installing the new component.This product is a genuine OEM MTD part sourced directly from the manufacturer. The part is sold individually and not available with any other components. This product is compatible with MTD and Cub Cadet products.

This replacement part is a tiller flap intended for use on lawn mowers. It protects the user and equipment from flying debris that might cause harm during use.A new tiller flap might be needed if the current one is missing or damaged at all. This can include the part being torn, bent, or cracked in any way. This part can be damaged after years of normal wear and tear and should be replaced if this is the case. Be sure the engine is powered off before attempting to replace or repair this part. This is a genuine OEM replacement part manufactured by MTD. This part is sold individually.

This part is a replacement steering drag link. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can be used to replace a broken or defective steering drag link on lawn tractors. The steering drag link is a critical component of the lawn tractor steering system. It works to convert the rotary motion generated by the crank arm to the wheels of the tractor. This enables the user to properly maneuver the equipment. If this part is bent, dented, or damaged, proper steering may be difficult or impossible. It's advisable to wear work gloves to protect the hands. It's important when working on or near an engine to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this steering drag link, the appropriate owner's manual and equipment diagrams should be utilized.As an authentic replacement part, this steering drag link is suitable for use on several different models of lawn tractors manufactured by MTD, Yard Machines, Bolens, Ryobi, and Troy-Bilt. Please note that this is a genuine part made of high-quality, durable metal and is sold individually.

This spacer is a genuine MTD part. A spacer can be used as a replacement part in a lawn mower or a log splitter. The purpose of this genuine OEM part is to reduce friction between one or more components while also keeping the components apart from one another.The spacer is a small fastening component that can be easily lost or misplaced without notice for a variety of reasons. If the spacer is damaged, it should be immediately removed and replaced.This is a genuine OEM replacement sourced directly from the manufacturer. It is sold individually. This spacer is compatible with equipment manufactured by MTD, Craftsman, Troy-Bilt, Yard Machines, Yard Man, Turf King, and MasterCut.

This part is a replacement gas gauge. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. If the current gas gauge is broken or in any way damaged, this part can be used as a replacement. It is intended for use with several lawn tractor models.The gas gauge both measures the amount of fuel residing in the tank and seals the fill spout of the fuel tank. This ensures that no dirt, debris, or contaminants can enter the tank and pollute the fuel supply. It also prevents fuel from spilling out. When working on or near an engine, always ensure that the equipment is powered off and completely cooled down before attempting to undergo any repairs. For more accurate information on how and where to install this gas gauge, the appropriate owner's manual and equipment diagrams should be referred to. This gas gauge is suitable for use on a variety of lawn tractor models manufactured by MTD, Troy-Bilt, Yard Man, Bolens, Cub Cadet, Husky, and Yard Machines. It is a genuine OEM part and thus is made of high-quality, durable materials. This part is sold individually.

The mower double deck pulley is an important part of many lawn mowers. The deck pulleys are used as a means to drive the blades on the mower. If the lawn's cut is uneven after mowing, the deck pulley may be the issue. In some cases, a damaged deck pulley might prevent the mower from working at all. Squealing sounds, buzzing sounds, and unusual vibrations are also signs of a damaged deck pulley.The double deck pulley could become damaged from simple wear and tear over years of use. It might also become damaged when using the equipment or while in storage. If there is an issue with the deck, it will need to be replaced as soon as possible to ensure the machine functions properly.This double pulley deck is for use with select lawn and garden tractors from MTD, Troy-Bilt, Yard-Man, Husky, and Yard Machines. This piece is sold individually. It is a genuine OEM replacement part that has been sourced from the manufacturer.

This genuine OEM replacement bracket stop seat is for riding lawn mowers or tractors. The part is located underneath the seat on riding mowers or tractors. Its purpose is to provide a safety shut off function when the rider leaves the seat while the blade is engaged. Over time, constant use of the mower can cause wear on the bracket, requiring it to be replaced. If a mower is left in the elements over an extended period of time, the bracket could rust. This would require the bracket to need replacing. Failure to replace a worn or rusted bracket stop seat could cause potential safety hazards as the engine may to fail to shut off if the rider should leave the seat while the blade is engaged. Replacing a bracket stop seat requires a screwdriver to replace. It is a fairly easy repair that should take under 30 minutes to complete. This part serves as a replacement if needed for the original bracket stop seat. This bracket is compatible with Craftsman, Cub Cadet, Troy-Bilt, Yard Machines, MTD, Husky, Montgomery Wards, Bolens, Yard-Man, and Ryobi brands. This bracket is sourced directly from the manufacturer and is sold individually.

This part is a throttle control box assembly. The throttle controls the amount of air or fuel that enters the engine and also controls the speed of the engine. This assembly includes a throttle control knob that allows the user to control the throttle and the speed of the outdoor power equipment machine.A new throttle control box may be needed if any part of the assembly is cracked, broken, or damaged in any way. It's important to remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment machines.This part is a genuine MTD throttle control box assembly and is an OEM part sourced directly from the manufacturer and it is sold individually. This specific throttle control box assembly is compatible with edgers and lawn tractors that are manufactured by MTD, Yard Man, Yard Machines, and Cub Cadet.

This insulator nut plate is a genuine MTD part, sold individually. This insulator nut plate can be used as a replacement part in a lawn mower. The purpose of the insulator nut plate in a lawn mower is to self-wrench into a bolt as a fastening component of several parts within the machinery of the appliance.The insulator nut plate can be easily lost or misplaced, or the component can become damaged and stripped over time from general wear and tear or as the result of an accident. The insulator nut plate is a small component and if it is found to be missing, it should be replaced by this genuine OEM replacement part. If the insulator nut plate is damaged, it should also be replaced. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This insulator nut plate is compatible with the following outdoor appliance brands: MTD, Craftsman, Toro, Cub Cadet, Troy-Bilt, Murray, Yard Machines, Huskee, Bolens, Yard Man, and MasterCut.