Statesman Tractor

This steering gear is an integral part of the guidance mechanism for riding mowers and lawn tractors. This gear meshes with the turning mechanism of the wheels, connecting the front axle to the steering column. The constant, short diameter turning of riding mowers puts a tremendous amount of pressure on the steering pinion gear as well as the steering plate, causing the teeth of each of these parts to wear out. Over time, the steering will become less responsive until eventually the drive wheels will not respond at all when the steering wheel is turned. This is usually an indication that the steering pinion gear is stripped and must be replaced. Replacing this gear involves removing the nut and bolt that fix the gear to the mowing housing. Often, the bushing that sits beneath the pinion gear also needs to be replaced because of wear, and this is the best time to do that, as well. It's also a good idea to see if the steering plate teeth are also worn, as this is the ideal time to replace it as well. All parts should be replaced with genuine OEM parts, manufactured, as this replacement part is, according the specs of the original part. This pinion gear is compatible with Huskee, Murray, Bolens, Yard Man, Troy-Bilt, MTD, Yard Machine, and Cub Cadet riding mowers. This part sold individually.

The nut-hex flange 5/8-18 features a hex nut with a wide flanged portion at one end. This flange will act as an integrated washer that does not spin. Since the flange acts as a washer, it ensures that the nut can fasten to the material's surface evenly. If any of these nuts are removed from a machine to do other work, it is recommended to replace them with a new nut-hex flange. Check the nuts that are currently on the machine at least once a year. Make sure they are properly tightened and that they are in good condition. Replace them as needed. This OEM part will work for many types of equipment, including lawnmowers, edgers, snowblowers, and lawn tractors. The part will work with many brands, including Ryobi, Poulan, Bolens, Yard-Man, MTD, Yard Machines, and Troy-Bilt.

This is a genuine replacement bolt that is designed specifically for use on select lawn tractors. This tractor bolt is a specialty piece of hardware designed for use on the steering segment gear. This screw holds the gear in place and is exposed to constant vibrations and repetitive motion as a result. Over time, that can result in damage, wear, or even total breakage of the bolt and require a replacement. If the bolt isn't functional or is missing, the steering segment gear will not be secured and that can lead to further damage if left unattended. Using a genuine replacement part like this will guarantee an exact fit for compatible models. This genuine OEM gear bolt is manufactured by MTD. It is compatible with lawn and garden equipment from RYOBI, HUSKEE, Troy-Bilt, Bolens, Yard Machines, Yard Man, and Cub Cadet, along with select models from MTD. The bolt works for more than 100 compatible models. It is made of durable metal and sold as an individual unit. A wrench or socket will be required to replace this part. Always wear gloves when performing repairs on lawn and garden equipment and allow the engine to cool before doing any work.

This carriage screw is a replacement part for Craftsman, Yard-Man, MTD, and Yard Machines lawnmowers and snowblowers. Carriage screws are made from durable metal and have a flat tip with a round head and threading on a portion of the shank. These screws may also be called coach screws or plow screws and are corrosion resistant, strong, and resistant to scratches. If a carriage screw breaks or beings to become weak, replacement may be required. In many cases, it’s possible to inspect the screw to determine whether it is still doing its job. The screw might be rusted or appear beaten up, which means it should be replaced. In most cases, it can be removed using a wrench unless the rusting is extreme. The new screw can be placed into the original hole and tightened to keep your snowblower running correctly. This is a genuine OEM replacement component for use with lawn tractors and snowblowers. It’s made of metal and can be found in various locations depending on the tool model. The screw comes as an individual item and will require the use of a wrench to install.

This OEM replacement push cap can be used in a variety of lawn and garden equipment. The push cap is secured to the end of a shaft, providing protection to the user from the sharp metal edge of the shaft. The push caps that are included with the machines may wear out over time or fall off in some cases, creating an injury risk involving sharp metal edges. These push caps are high-quality and made from durable plastic. They are easy to install. The OEM push cap is a genuine part made by the original manufacturer, to ensure quality and s proper fit. The push caps can be used on lawn tractors, chippers, shredders, log splitters, and other equipment. Some of the brands that this push cap is compatible with include MTD, Husky, Yard-Man, Bolens, Troy-Bilt, Ryobi, Yard Machines, and cub Cadet.

This authentic OEM replacement part is a steering shaft intended to be used on lawn tractors. A steering shaft connects the steering wheel to the rest of the steering mechanism. As a user rotates the steering wheel, the steering shaft also rotates to move the pinion along the steering rack. The more the steering shaft rotates, the more the pinion travels along the rack, and the more the wheels turn in the direction of the steering wheel. Steering shafts most commonly have to be replaced if the steering mechanism becomes worn out or stripped. When this happens, steering will be more difficult and cause strange clunking sounds. The steering wheel may also feel looser than normal and may not recenter after being turned. Leaving a faulty steering shaft unrepaired can lead to accidents. Replacing the steering shaft means detaching the lower deck of the lawn tractor from the upper frame, then removing the steering wheel, adapter, fuel tank, and old steering shaft. This requires a socket wrench set and can is an intermediate-level repair. This part is compatible with MTD, Yard Machines, Troy-Bilt, Yardman, Husky, and Bolens lawn tractors. It ships individually and is sourced from the original manufacturer.

Carriage bolts are flat-tipped with round heads, and their function in small engine appliances is to fasten together components and to secure that connection with a nut. There are various reasons that a carriage bolt might have to be removed and replaced, among them misplacement of the small, easily lost part. Other reasons to replace a carriage bolt could include damage or erosion that prevents the bolt from attaching the materials to one another effectively. If a carriage bolt is subject to this kind of damage, it should be replaced before using the small engine appliance. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This genuine MTD carriage bolt can be used as a replacement part for several different kinds of appliances that require small engines, including lawnmowers, snowblowers, wood-chippers, tillers, string trimmers, leaf blowers, and edgers. The OEM carriage bolt is compatible with the following brands: Craftsman, Toro, Cub Cadet, Ryobi, Troy-Bilt, Murray, Yard Machines, MTD, Huskee, Montgomery Wards, Bolens, Yard-Man, Turf King, and MasterCut. This part is sold individually.

This part is an idler pulley. The idler pulley applies tension to and guides the engine drive belt. A wrench set is needed to perform any repair involving the idler pulley part.The idler pulley can become worn over time with normal use. Wear to the pulley can cause the belt to slip. Signs that the idler pulley needs to be replaced include squealing noises coming from the equipment, the engine stalling, or overheating. The idler pulley is an essential component and it is important to replace this part if it becomes worn, broken, or damaged in any way.This part is a genuine MTD part and is an OEM part sourced directly from the manufacturer and it is sold individually. This idler pulley is compatible with lawn tractors and snowblowers manufactured by MTD, Yard Machines, Bolens, Yard-Man, Troy-Bilt, Cub Cadet, and Husky.

The jam nut can be used in different locations within various types of lawn and garden machines. It is often used as a type of locknut that is jammed against a standard nut. This will help to lock both of the nuts in place. The jam nut is also considered a low profile nut, as they are usually half as tall as a regular nut. Owners may find that they eventually need to replace the jam nuts that came with their equipment. The replacement might be needed because one of the nuts is no longer holding tightly, or because it has been worn down or corroded. Additionally, the owner may have lost a nut when working on other parts of the machine. Replacement is fast and simple. Many buyers choose to get several of the nuts at once to have some on hand when needed. The genuine OEM jam nut is identical to those that came with the machine. It is sold individually and works for equipment such as lawn mowers, lawn tractors, tillers, and log splitters. Compatible brands include Craftsman, Toro, Cub Cadet, Ryobi, Troy-Bilt, Murray, Yard Machines, MTD, Huskee, Montgomery Wards, Bolens, Yard-Man, and MasterCut.

This authentic OEM replacement ball joint assembly is a part of the front suspension of a lawn tractor or riding mower. Suspensions are complex systems that include joints, bushings, and bearings that must all work together to turn and maintain contact with the ground. This ball joint assembly helps to connect all of these components. It works similarly to a human hip in that it has a joint and a ball that allows for pivot motions. The most common reason for a ball joint assembly to go bad is if it loses lubrication or becomes gritty. In order to work smoothly, these joints must stay well oiled or else they will grind and break. If the ball assembly breaks, use a wrench to disengage the wheel and change out the part. This is a fairly straightforward repair and should not take more than a few minutes. This replacement assembly is a high-quality part for Cub Cadet, Huskee, MTD, Yard Machines, Murray, Troy-Bilt, Bolens, Ryobi, and Yard Man machines. This part is sourced from the original parts manufacturer and ships individually.

This is a versatile screw designed with flanged hex head and double-lead threads. It is a high-low self-tapping screw with one thread that is high and the other low for easier penetration. The twin threads also reduce the amount of material displaced when the screw is driven into the material. This type of screw also creates a firmer grip. This screw can also be used to secure a newly installed front cover or grill. This part is available as an individual replacement part. It is a genuine OEM part for use with specific models of snow throwers, lawn tractors, electric mowers, chippers, and log splitters from Bolens, Cub Cadet, Craftsman, Poulan, Ryobi, Toro, MTD, Troy-Bilt, Yard Machines, and Yard-Man.

The choke cable opens and closes the valve that controls the choke, or throttle, on the lawn mower. When the choke handle is depressed or pulled out, it will open or close the butterfly valve, controlling fuel flow to increase or decrease the speed and performance of the mower. Based on the type of tension cable that is used, this part can wear out or even snap from regular use and need to be replaced. The durable choke cable will be easy to install, but always disconnect the spark plug and wear gloves. This genuine OEM choke cable can be used with mowers from RYOBI, MTD, Husky, Yard Machines, Yard-Man, Troy-Bilt, Cub Cadet, and Bolens. It is made of metal and plastic and comes directly from the manufacturer to ensure quality. Sold individually.