Parts for Husqvarna YTH180: Steering Assembly Parts

Here is a replacement thrust washer that can be used in lawn mowers. A thrust washer is a type of flat washer that is used between a stationary component and a surface that rotates, and they are used for a range of applications, not just for engines. The thrust washer is made from metal and it is durable. However, there may be a time when one or more thrust washers need to be replaced. This might be due to corrosion or damage to the washer. It could also result from the thrust washer becoming lost when the owner is working on the machine. Many buyers will choose to purchase several thrust washers at once so they can have them on hand if they need them in the future. The genuine OEM replacement thrust washer is sold individually. This washer can be used in various models of lawn mower and lawn tractor. It is compatible with more than 150 models. Compatible brands include Craftsman, Husqvarna, Weed Eater, Poulan, Murray, and Ariens.

This washer is a genuine Husqvarna part and an OEM authorized part. This washer can be used as a replacement part for several different kinds of small engines, including lawn tractors, snowblowers, chipper shredders, leaf blowers, and lawn mowers. The general function of a washer is to serve as a measure of protection when connecting nuts, bolts, and other such fasteners, keeping the fasteners from loosening and unscrewing over time. A reason to replace a washer might be simply losing the washer itself, as it is small and easily misplaced. Other reasons include the gradual rusting, deterioration, bending, or cracking that can be attributed to general overuse or long-term exposure. If a washer is subject to any of this kind of damage, it is best to replace it before using an appliance that requires a functioning washer, as the malfunction might cause permanent or serious damage to an engine or appliance. Remember that one must always wear gloves when handling, repairing, and operating outdoor equipment. This washer part is compatible with the brands Husqvarna, Poulan, Weed Eater, and Ariens. This part is sold individually.

This split lock 3/8 washer can be used in a variety of lawn and garden tools. It functions as a component that prevents nuts and bolts from loosening due to vibration when a tool is in use. It’s a split ring with a helical shape, and when fastened together, it exerts a force on the fastener for resistance to motion and increased friction. Typically, this washer is attached on the nut side of a fastener. Over time, the split lock 3/8 washer can start to wear, degrade, or fall apart. This leads to a need for replacement in order to keep the other tool components in the best shape. A flathead screwdriver can be used to pry the washer loose from the bottom or from the split in the washer. Tools needed might include ratchets, wrenches, and a screwdriver. This is a genuine OEM washer known as a 3/8 lock or 3/8 split lock washer and comes as an individual item. It’s gold in color and made out of metal. It can be used for lawnmowers, snowblowers, string trimmers, tillers, wood chippers, and edgers by Husqvarna, Craftsman, Ryobi, Poulan, Weed Eater, Ariens, Murray, and Dixon.

This replacement part is a sector gear, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by Husqvarna. A sector gear is a portion of a gear that contains a type of tooth, or rigid outside, that allows it to connect with others gears as well as the center bearing.If the sector gear has become stripped in the middle it might not stay in the place. This is normal and typically due to wear and tear inside the engine and machine itself. Be sure the entire device is properly shut down before attempting to replace or repair this gear. Work gloves are also recommended as some parts are sharp and dangerous. This specific gear is a genuine OEM replacement part and is sourced directly from the manufacturer. This sector gear is sold individually.

This steering bushing kit is a genuine Husqvarna part, sold individually. This steering bushing kit can be used as a replacement part in a lawn mower. The purpose of the steering bushing kit is to bolster the placement of the steering wheel shaft, which is affixed to the steering boot; the steering bushing also tamps down excessive vibration from the appliance while the operator holds onto the steering wheel. If the steering bushing has been damaged in the form of puncturing, ripping, tearing, denting, cracking, or warping to the point that it cannot function, the steering bushing kit should be ordered as a genuine OEM replacement part according to the instructions in the proper manual.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This steering bushing kit is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Poulan, and Jonsered.

A flat washer is used in conjunction with threaded screws or bolts. Before inserting and fastening a bolt into the surface, the fastener is inserted through its end. This is a typical application of washers because they distribute the fastener's load. It also helps with heat and friction reduction as the fastener is tightened. In some implementations, a flat washer also works as a spacer, as well as additional electrical insulation. A flat washer is made from metal. However, it can break down. One of the warning signs of a bad washer is that it doesn't have its distinct circular shape, appearing bent or cut in half. Replacing a flat washer is easy, however, and only requires a screwdriver or socket wrench (depending on the type of fastener). Loosen and remove the fastener. Then, take the broken fastener out. Insert the new flat washer into the fastener. Then, screw the fastener back. This flat washer is an original Husqvarna product. It is made for lawnmower models manufactured by Craftsman, Murray, Husqvarna, Ariens, Poulan, and Weed Eater. It is made of metal and is sold individually. Fasteners are not included.

A lock nut secures bolted joints with the creation of friction on the thread of the bolt. It prevents loosening of parts, which is a common occurence on lawn machines due to the tremendous amounts of vibration and wear, which can loosen connections between crucial components. This lock nut will prevent such issues. It will be necessary to have wrenches and other tools to make the repair or replacement. This OEM lock nut for Husqvarna and Craftsman fits garden machines that include tillers, lawnmowers, tractors, and other equipment. This durable part ships individually.

This is a genuine replacement lock nut from Husqvarna. Lock nuts are ideal for lawn and garden equipment and engines because they are designed to stay tight even under excessive pressure or vibration. Lawn mowers and other lawn equipment can produce a lot of vibrations during regular operation and lock nuts can assist in keeping everything in place. Over time, however, it can become worn or the lock feature could fail. Sometimes, the nuts are lost in the process of other repairs. The lock nut has numerous applications and locations, depending on the type and model of equipment. Consult the parts diagram for applications and replacement procedures. This genuine OEM lock nut is compatible with lawn mowers, trimmers, and snowblowers from Husqvarna, Weed Eater, Poulan, Craftsman, RYOBI, Murray, and Ariens. This part is standard hardware and is sold as an individual piece. Those who need additional lock nuts will have to purchase multiple quantities. A wrench or socket will be required to perform the replacement of this nut. Always wear gloves when performing repairs on lawn and garden equipment engines.