Parts for Craftsman 247270380: Steering Parts

This ball joint is a genuine MTD part, sold individually. This ball joint can be used as a replacement part in a lawn mower. The purpose of a ball joint is to allow the operator to smoothly steer the appliance by giving free range of motion for the control arm to pivot.The ball joint in a lawn mower might have to be completely replaced if the ball joint suffers damage that prevents the component from functioning properly. This could occur if the ball joint has been punctured, dented, cracked, warped, or eroded. If this occurs, the ball joint should be removed and replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This ball joint is compatible with the following outdoor appliance brands: MTD, Craftsman, and Cub Cadet.

This replacement part is a screw. This is a genuine replacement part made by MTD. Screws are small but important to the overall workings of many appliances. Screws work with other small pieces such as nuts and washers to keep parts secure during use.A new screw might be needed if the current one is missing or damaged. This can be caused by normal wear and tear with years of use. Screws endure large amounts of friction over time and can become worn down. If this is the case, be sure the replace the part as it might not be as effective as normal. Refer to the user manual for specific directions on the replacement of this part. This part is sold individually and is sourced directly from the manufacturer. This is a genuine OEM replacement part.

This hex screw is an authentic OEM replacement part sourced directly from the manufacturer. It is used in many different applications in lawn and garden equipment and can be used on many different machines. If the hex screw is missing or loose due to deterioration, a new hex screw should be installed. Hex head screws are removed and replaced using a hex wrench. Screws are used to secure one part of a machine to another part. This hex head screw is not self-tapping, it is designed for pre-drilled holes. Most applications will require a washer and bolt to secure the screw, but there are applications where the screw is inserted into parts that do not have an opening on the other side and so the screw does not need to bolt. Wear gloves when working with screws and outdoor equipment. This hex head screw is made of hardened metal and is sold as an individual unit. This hex head screw can be used on many different model machines manufactured by MTD, Ryobi, Murray, YardMan, Bolens, Cub Cadet, and Husky.

Hex nuts are a common type of nut used with bolts, anchors, studs, and screws. These nuts are often present in lawn and garden equipment like lawnmowers. A hex nut has a hexagonal shape with machine screw threads and can be used with lock washers. Hex nuts are made of durable metal but can become damaged, corroded, or even break over time.Visually inspecting the hex nuts on lawn equipment will provide information about whether it's damaged or broken. This might be seen as a dent, a misshapen nut, or a nut that has broken in half. If these things are present, the hex nut will need to be replaced. Remove the hex nut using a socket wrench and socket and then place a new one on the machine. Once it has been situated, tighten the nut so it holds the other parts stable before using the machine.This hex nut is a genuine OEM replacement part sourced directly from the manufacturer. It comes as an individual component. The part can be used in lawnmowers, log splitters, snowblowers, tillers, and string trimmers made by Craftsman, Toro, Cub Cadet, Troy-Bilt, Murray, Yard Machines, MTD, Huskee, Montgomery Wards, Bolens, Yard-Man, and MasterCut.

This is a flanged lock nut. It’s designed to apply tension, typically on a joint that needs to have a certain amount of flex. As such, it’s mostly used on snowblower chutes and lawnmower handles. They can remain in place, but with a forgiving connection that can take a beating. The nut size is 3/8, with a thread size of 16. A lock nut will generally last for many years. However, the silicone ring inside will wear down if it’s frequently tightened and loosened. It needs to be replaced when it will no longer reliably remain in place. Generally, this begins as a symptom of slight slippage and worsens as time goes on. Thankfully, whether it’s being used on a snowblower or a lawnmower, this nut is generally straightforward to access. Simply unscrew the old nut, then screw the new nut on until it’s nice and tight. Our flanged lock nuts are genuine OEM MTD nuts, and they are sold individually.

This part is a replacement steering drag link. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can be used to replace a faulty or damaged steering drag link in a variety of lawn tractor models. The steering drag link is an important part of the steering mechanism in a lawn tractor as it connects the spindle to the sector gear. If this part is bent or damaged, the lawn tractor may be difficult to maneuver, which can be dangerous. It is always recommended that the appropriate safety precautions are adhered to when attempting to fix any power tools or machinery. Proper tools are required to replace this part. For more accurate information on how and where to install this steering drag link, the appropriate owner's manual and included diagrams should be referenced.As an authentic replacement part, this steering drag link is suitable for use on several different models of lawn tractors manufactured by MTD, Troy-Bilt, and Cub Cadet. This is a genuine part made of high-quality, durable materials and is sold individually.

This steering drag is an authentic OEM replacement part that is sourced directly from the manufacturer for use on riding lawnmowers and tractors. It connects the steering wheel and shaft assembly to the front tires for steering the mower. If the steering drag is damaged, the direction the wheels go when the steering wheel is turned will not be correct. If the drag is broken, the wheel will not turn when the steering wheel is turned, and the drag will need to be replaced. Before starting, remove the spark plug for safety and park the mower on a flat surface and note the angle of the wheels. Open the hood. Pop the center of the steering wheel out with a flathead screwdriver. Loosen the nut under the spindle associated with the wheel that is crooked. Remove the nut from the steering spindle that was loosened. Take the drag arm off the spindle and spin it to release it from the tie rod. Install the new steering drag and reverse the steps to reassemble the lawnmower. This steering drag is a silver metal part that is sold individually. Note that this is a right-hand steering drag, and make sure to verify before ordering. This steering drag is designed for use on lawn mowers and tractors manufactured by MTD, Craftsman, Troy-Bilt, and Cub Cadet.

This replacement part is a steering wheel intended for use with lawn tractors. The steering wheel is connected to the wheels and axles so that the user may rotate the machine as needed during use. A new steering wheel might be needed if the current one is no longer working. If the steering is not consistently turning the machine as directed, it might be due to a malfunctioning steering wheel.This is a genuine replacement part made by MTD. It is an OEM replacement part which will ensure a proper fit. This part is sold individually.

A flange nut's unique wide flange design distributes the nut's pressure over the part it is securing. In return, it creates an even fastening surface, which reduces part damage and nut loosening. This one-piece all-metal fastener has a lock nut version that features a protruding circular flange. This drastically increases bearing surface, compatibility either for irregular or oversized holes, and surface tension reduction. Flange lock nuts are the preferred type of fastener for many lawnmower models because it can provide better fastening than regular screws, which are known to loosen under extreme vibration. However, it’s important to know that flange lock nuts are susceptible to wear and tear due to constant vibration exposure. It is essential to replace the broken flange lock nut immediately to prevent serious damage to the lawnmower. The MTD 712-04063 Flange Lock Nut OEM replacement can be used with Craftsman, White Outdoor, Yard Machines, MTD, or Columbia lawnmowers. It is a genuine or OEM MTD replacement part that measures 5/16-18. It is threaded and requires the use of a wrench. This replacement flange lock nut is sold individually. An MTD bolt carriage may also be needed and is sold separately.