Parts for Mtd 13A226JD099: Steering Parts

If your lawn tractor won't steer or the front wheels don't rotate properly, this front axle assembly restores wheel movement and steering control.

Fixes uneven cutting or blade wobble on lawn tractors. This spindle assembly connects the blade to the deck. Moderate difficulty repair with basic tools.

This upper tube assembly is a genuine MTD part, sold individually. A upper tube assembly can be used as a replacement part in a lawn mower. This genuine OEM part is made out of durable, high quality material and is sold individually. The upper tube assembly in a lawn mower may need to be replaced at any point within the typical lifespan of the appliance. This could easily occur if the upper tube assembly has suffered damage in the form of denting, cracking, puncturing, piercing, tearing, warping, or eroding. If this damage occurs to the extent that a replacement is necessary, it should be removed and replaced by this OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This is a genuine OEM replacement part sourced directly from the manufacturer. This upper tube assembly is compatible with the following outdoor appliance brands: MTD, Craftsman, and Cub Cadet.

Replacement lower chute assembly for lawn tractors and riding mowers. Installs at the discharge outlet. Replace if cracked, broken, or missing.

Replace a missing, stripped, or corroded 1/4-20 x 1.2 hex head screw on your riding mower or lawn tractor. Secures components during operation.

Hex screw for outdoor power equipment. Replacement fastener for lost, stripped, or damaged screws. Installs in various assembly locations.

Carriage bolt for lawn mowers and outdoor power equipment. Fastens components together with a nut. Replace if lost, stripped, or damaged during repair.

This replacement part is a ferrule. This is a genuine replacement part made by MTD. This part is often found in lawn tractors and is used to reinforce a shaft or bind together different materials. This ensures that the engine is working properly during use. A new ferrule might be needed if the current one is unable to stay in place. This can be caused by normal wear and tear with years of extended use. If the part has been worn down or stripped over time, it is not uncommon for them to be replaced. Wear work gloves during this repair to prevent injury to the user. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.

A flange lock nut, also known as a flange lock or a lock nut, is created to be used in various types of lawn and garden equipment. This flange lock nut holds other parts in place and, when properly threaded, will resist loosening. Over time, a flange lock nut may begin to weaken and may become loose or break. If it appears to be broken or weak, a replacement is required. Flange locks can be adjusted and uninstalled after use. When replacement is required, you may need a socket set, screwdriver, hacksaw, and butane torch. The socket wrench will loosen the bolt it is connected to, while the torch is used to heat the lock nut. A socket wrench may remove the nut, but sometimes cutting it with a hacksaw is required. This flange lock nut is a genuine OEM component directly from the manufacturer and comes in an individual unit. It is made of metal, a gold color, and can be found in various areas of lawn equipment. It works with lawnmowers, trimmers, snowblowers, cultivators, tillers, and leaf blowers by Poulan, MTD, Toro, Cub Cadet, Murray, Troy-Bilt, Bolens, Yard Machines, Craftsman, and Yard-Man.

This is a flanged lock nut. It’s designed to apply tension, typically on a joint that needs to have a certain amount of flex. As such, it’s mostly used on snowblower chutes and lawnmower handles. They can remain in place, but with a forgiving connection that can take a beating. The nut size is 3/8, with a thread size of 16. A lock nut will generally last for many years. However, the silicone ring inside will wear down if it’s frequently tightened and loosened. It needs to be replaced when it will no longer reliably remain in place. Generally, this begins as a symptom of slight slippage and worsens as time goes on. Thankfully, whether it’s being used on a snowblower or a lawnmower, this nut is generally straightforward to access. Simply unscrew the old nut, then screw the new nut on until it’s nice and tight. Our flanged lock nuts are genuine OEM MTD nuts, and they are sold individually.

Secures pins and shafts on lawn tractors and riding mowers. Replace if bent, missing, or worn. Bow-tie design inserts through pre-drilled holes.

Steering pinion gear connects the steering column to the front axle turning mechanism on riding mowers. Replace if worn, stripped, or damaged.

Replacement cap for lawn mowers and tractors. Installs on various locations to cover openings or protect components. Order if your original cap is cracked, broken, or missing.

Replacement snap button for lawn tractor hoods and covers. Secures panels in place. Order a new snap button if yours is broken, missing, or worn out.

Replacement lower steering collar for lawn tractors and riding mowers. Protective cover that fits around the steering shaft. Replace if cracked or missing.

Upper steering collar for riding mowers and lawn tractors. Replaces cracked, worn, or broken steering collars. Installs on steering shaft assembly.

This genuine steering shaft is a replacement for select models of lawn mowers from MTD and other brands. The steering shaft attaches to the axle and the steering column and is responsible for creating the movement when the wheel is turned. If the shaft is damaged or breaks, the mower will not be able to be used until it is replaced.The steering shaft is made of durable metal, but it is subject to repetitive motion and constant vibrations, and it could also be affected by impact damage. When the shaft is damaged or bent, it will not be able to function. This OEM replacement part will resolve the issue for compatible machines. This model is compatible with lawn mowers from MTD, Troy-Bilt, Cub Cadet, Murray, and Yard Machines. It is sold as an individual part and does not include any additional hardware. The durable metal piece should be installed only when the power is disconnected and the unit is cooled completely. Wear gloves for hand protection and always work in a well-ventilated area for safety.

Flange bearing supports rotating components in lawn tractors and riding mowers. Replace if you notice wobbling, noise, or uneven cutting. Verify fit with your model number.

This bearing flange is used on a wide variety of lawnmowers and lawn tractors. Unlike other bearings, the flange bearing is used to ensure the axle assembly stays securely attached to the pivot axle. The purpose of the flange bearing is to make sure the axle is able to move freely and in an effortless manner. The bearing undergoes a large amount of friction and stress while in use, so it can start to wear down.If the lawnmower is showing signs of wear at the flange bearing, it should be replaced. It's a good idea to regularly inspect the part to be sure it is in good shape. To replace the flange bearing, remove the bolt from the steering shaft and remove the old bearing. Grease the new bearing and the shaft before reinstalling the part. Reassemble and tighten all parts.This is a genuine OEM replacement part that is directly sourced from the manufacturer. It is sold as an individual component. The flange bearing is made to be compatible with lawnmowers created by MasterCut, Yard-Man, Bolens, Huskee, MTD, Yard Machines, Murray, Troy-Bilt, Cub Cadet, and Craftsman.

Fix steering problems and squealing sounds when turning your lawn tractor. This left-hand steering rod restores control to various tractor models.

Replacement steering rod for lawn tractors and riding mowers. Connects steering components to control direction. Replace if bent, damaged, or worn.

Replace your worn or damaged lawn tractor front tie rod. Connects to the steering knuckle to enable steering control. Order a new tie rod if broken.

This part is a lower steering bracket that is used on lawn tractors and riding lawnmowers. The lower steering bracket holds the steering pump in position. This part is essential for the proper operation of the machine. A new lower steering bracket may be needed if the original is cracked, broken, dented, or damaged in any way. If the steering pump is not being held in position, the steering bracket will need to be replaced. This component may wear out after normal use over a period of time. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment.This lower steering bracket is a genuine MTD part. It is sold individually. This specific lower steering bracket is compatible with lawn tractors and riding lawn mowers that are manufactured by MTD, Craftsman, Yard Machines, Columbia, Murray, and Troy-Bilt.

Steering wheel for lawn tractors and riding mowers. Replaces cracked, broken, or worn steering wheels. Installs on the steering column for safe control.

This complete wheel assembly is a genuine OEM part that is sourced directly from the manufacturer for use on riding lawn mowers for moving the lawnmower around. The wheel assembly contains the wheel, rim, and connecting rod. Over time, normal wear and tear can cause the wheel assembly to malfunction. If the wheel assembly is damaged, the lawnmower won't be functional until the wheel assembly is replaced. If the lawnmower is wobbly or not riding smoothly, the wheels should be checked for damage. Any damaged wheels should be removed and replaced. Remove the spark plug before replacing the wheel assembly. Wear work gloves and safety goggles when making repairs. Before replacing the wheel assembly, place a block or jack under the lawnmower. Use a socket to remove the nut securing the wheel assembly. Remove the damaged wheel assembly and place the new wheel assembly on the shaft. Replace the nut and tighten it. Lower the mower. This complete wheel assembly is sold as one individual unit. The wheel assembly is designed for use on lawn mowers and lawn tractors made by MTD, Troy-Bilt, Yard Machines, Cub Cadet, and Murray.

Flat washer for riding mowers and lawn tractors. Replaces worn, missing, or damaged washers on various mounting points and fastener assemblies.

Secures wheels and attachments to axles on lawn mowers and tractors. Replace if bent, rusted, broken, or lost to restore safe equipment operation.

Black plastic wheel hub cap for lawn tractors and riding mowers. Replaces cracked, broken, or missing hub caps. Snaps onto wheel hub for a finished look.