Parts for Frigidaire FFTR1425VW: System Parts

This shaft is a direct-replacement support pin that restores proper alignment and rotation in compatible Frigidaire appliances. It helps return worn or damaged supports to factory fit so components turn smoothly. What it does

• Supports and aligns a rotating component so it turns true and without excessive wobble
• Transfers rotational force from the motor/drive to the drum or rotor
• Common symptom: loud noise or scraping during operation
• Common symptom: drum or component feels loose or wobbly when spun by hand

• Disconnect power before starting any repair.
• Access may require removing panels or the appliance drum; keep track of fasteners.
• Inspect mating bearings, bushings, and seals; replace if worn to prevent premature wear of the new shaft.

The Sensor is an OEM part for Frigidaire refrigerators. It monitors and regulates the temperature of your refrigerator. It is responsible for accurately measuring and regulating the temperature inside the refrigerator, ensuring stable cooling.

A bad sensor can be caused by electrical issues, sensor failure, or physical damage. Signs of a faulty temperature sensor include inconsistent cooling, incorrect temperature readings, or the refrigerator not maintaining the desired temperature.

Symptoms of a bad sensor can include:

• Inconsistent cooling
• Incorrect temperature readings
• Failing to maintain the set temperature 

Replace your malfunctioning sensor with this genuine OEM part to restore your refrigerator. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

This support is a small mounting bracket that secures an internal appliance component to prevent movement and maintain proper alignment. It restores stable positioning so affected parts operate quietly and reliably. What it does:

• Secures and stabilizes an internal component or assembly to the cabinet or frame
• Prevents sagging, tilting, or unwanted movement that can cause rubbing or noise
• Helps maintain correct alignment for smooth operation of the connected part
• Reduces stress on fasteners and adjacent components to prevent premature wear

• Disconnect power and, if applicable, water before beginning repair
• Use basic hand tools; retain original fasteners unless replacements are provided
• Inspect surrounding components and mounting points for damage; replace if needed

The PC Board is an OEM replacement part for Frigidaire refrigerators. It is an electronic component that controls various refrigerator functions such as temperature settings, cycles, diagnostics, and more. 

Symptoms of a bad PC board include:

• Refrigerator not cooling or icing 
• Display or control panel not working properly
• Inability to change temperature settings
• Abnormal or unexpected clicking/humming sounds

Causes of failure could include exposure to moisture, power surges, or general component fatigue over time. 

This OEM Frigidaire replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Start Device is an OEM part for Frigidaire refrigerators. It is a component that controls the start up of the refrigerator compressor. The start device works with the run capacitor and relay to provide the necessary spark to safely and reliably turn on the compressor whenever needed.

Causes of a faulty start device can include normal wear and tear over time, exposure to moisture or humidity, or component failure due to age.

Symptoms of a bad start device include:

• The compressor not engaging at all
• The refrigerator not cooling properly
• Strange noises coming from the compressor area
• Increased utility costs due to inefficient operation

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This replacement access panel cover protects internal components and keeps wiring and controls enclosed for safe, reliable operation while restoring the appliance's appearance. It snaps into place over the designated opening for a clean finish. What it does:

• Covers and protects control boards, wiring, or other internal components from dust and accidental contact
• Helps maintain proper airflow routing and prevents debris from entering sensitive areas
• Restores a secure, flush appearance when the original cover is cracked, broken, or missing
• Reduces risk of loose wires or connectors being snagged during use or service

• One replacement access panel cover

• Disconnect power to the appliance before starting any work to avoid shock or injury
• Remove fasteners or clips holding the old cover, then align tabs and snap or secure the new cover in place
• Use basic hand tools; avoid forcing clips to prevent breakage of surrounding plastic
• Exercise care to avoid disturbing wiring or connectors

This replacement power cord restores electrical connection to your appliance so it can safely receive mains power. Durable construction helps replace a damaged or frayed cord and prevent intermittent power loss. What it does:

• Replaces a worn, frayed, or damaged power cord to restore power to the appliance
• Provides a secure electrical connection from the wall outlet to the appliance
• Stops symptoms like no power, intermittent power, or visible cord damage
• Helps eliminate sparking or exposed wiring hazards when the original cord is compromised

• One replacement power cord

• Always disconnect the appliance from power at the breaker or unplug before starting
• Route the cord and secure strain relief as the manufacturer specifies to prevent pinching or wear

The Drain Pan is an OEM part for Frigidaire refrigerators. It is located at the bottom of the refrigerator to collect any moisture, spills, or condensation. This pan helps keep the bottom of the refrigerator clean and dry.

Causes of a bad drain pan can include cracks or holes that allow leaks, corrosion that impacts drainage, or warping preventing proper fit.

Symptoms of a bad drain pan include:

• Puddles or standing water at the bottom of the refrigerator
• Musty smells from moisture build up
• Ice or frost accumulation underneath

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This defrost heater melts frost and ice buildup on the evaporator to restore proper airflow and cooling in frost-free refrigerators. Replacing a failed heater helps the appliance maintain even temperatures and prevents excessive frost accumulation. What it does:

• Warms the evaporator coil during the defrost cycle to remove accumulated frost and ice
• Restores normal airflow through the freezer compartment when ice is preventing circulation
• Helps prevent long run times and temperature drift caused by iced-over coils
• Can resolve symptoms like visible frost buildup in the freezer, reduced cooling performance, or a refrigerator that runs continuously

• One defrost heater

• Disconnect power before accessing the evaporator and heater to avoid shock
• Access typically requires removing the freezer evaporator cover or back panel—handle evaporator fins and wiring carefully
• Verify other defrost system components (thermostat/thermistor, timer/control, and harness) if symptoms persist after replacing the heater

This is a replacement threaded screw used to secure appliance components where the original fastener is missing or damaged. It restores proper attachment so panels, brackets, or small parts stay in place. What it does:

• Secures panels, brackets, or trim to the appliance to prevent movement or rattling
• Replaces missing, stripped, or damaged screws that can allow parts to come loose
• Helps restore proper alignment of parts when used in original mounting locations
• Suitable as a direct-fit replacement when the OEM part number matches

• Disconnect power before working on any appliance and follow all safety precautions
• Use the correct driver or bit to avoid stripping the screw head
• Keep small parts away from children and pets; magnetic trays help during installation

This replacement screw secures appliance panels, brackets, and components for a solid, rattle-free fit. Replace stripped, rusted, or missing hardware to restore proper alignment and dependable fastening where this fastener is specified.

• Fastens panels, brackets, trim, or internal parts to the cabinet/frame
• Helps maintain alignment and reduce vibration or rattling noises
• Direct replacement for stripped, rusted, or missing hardware
• Symptoms include loose panels, gaps, or screws that won't tighten

• Disconnect power (and gas/water if applicable) before servicing
• Use the correct driver/bit; hand-start threads to avoid cross-threading
• Replace screws one at a time to maintain alignment
• Snug firmly—do not overtighten into plastic or thin metal