Thermador Range / Cooktop / Oven Heating Element

Oven not heating evenly in convection mode? This rear convection heating element restores proper temperature. DIY-friendly, typically installs in 10-20 minutes.

This bake element heats the small oven cavity from below during Bake, delivering the radiant heat needed for preheating and consistent baking when the original element fails.

• Provides primary bake heat at the bottom of the small oven cavity
• Works with the oven control to preheat and maintain set temperature
• Common failure symptoms: no or weak bake heat, uneven baking, visible blistering/cracks, or a breaker trip when Bake is selected

• Disconnect power at the breaker before servicing
• Access is typically from inside the cavity; remove mounting screws, pull the element forward, and move wires one at a time
• Support wires so they don't retract into the insulation; avoid bending or stressing the new element
• Restore power and run a bake cycle to verify proper heating

Oven slow to heat or not reaching set temperature? This bake heating element restores proper heating. Straightforward DIY repair that can save $500+.

If your cooktop burner won't heat or shows no signs of power, this dual-size radiant element restores both inner and outer cooking zones in 30-45 minutes.

Oven not heating or baking unevenly? This 27-inch bake element restores proper bottom heat. Moderate DIY repair requiring electrical disconnect.

Fixes uneven baking and E34 error codes. This convection heating element restores proper heat circulation in your oven. Moderate DIY repair.

Oven won't brown food or broil element doesn't glow? This broil element restores top heating for browning and finishing. Easy DIY fix in under 30 minutes.

Warming drawer not heating or taking too long to warm up? This heating element restores gentle heating to hold food at serving temperature. DIY repair.

Cooktop not heating? This radiant heating element restores proper cooking temperature. Common fix for burners that won't heat or heat unevenly.

If your cooktop won't heat or heats unevenly, this heating element restores proper cooking temperatures. Direct replacement for worn or burned-out elements.

Burner not heating or heating unevenly? This radiant surface element restores consistent cooking heat to your electric range smoothtop. Direct replacement.

Range burner not heating? This electric heating element restores proper cooking temperature. Common DIY repair for weak or non-functioning cooktop burners.

This hot plate is a 1500W single cooking element designed to restore heat to an electric cooktop. It replaces a failed element so burners heat evenly for normal cooking performance. What it does

• Heats cookware using a 1500-watt heating element for typical stovetop cooking
• Replaces a burned-out or non-heating burner to restore a single cooking zone
• Addresses symptoms like no-heat, uneven heating, or burner that won't warm up
• Works with the existing cooktop mounting and wiring when the element is compatible

• One 1500W single hot plate element

• Disconnect power to the appliance before attempting service to avoid shock
• Inspect wiring and connectors for damage; replace any worn parts per OEM guidance
• Handle the element carefully to avoid bending or damaging terminals