Thermador Wall Oven Knob, Dial & Button

Knob, blk (cvs)

The Control Knob is an OEM part for Bosch ranges and cooktops. As the interface regulating gas flow, control knobs activate precise burner levels through internal calibration.

Causes of failure include loosened set screws beneath allowing knob slippage. Prolonged heat and moisture exposure may also degrade contact surfaces over time.

Symptoms of faulty knobs include:

• Burners failing to engage or not matching dial settings
• Inability to decrease output levels from full flame
• Knobs wobbling insecurely or detaching entirely

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This is a replacement control knob that restores safe, easy control of a cooktop or oven function. It provides a secure grip and clear position indication so you can set heat or cycle settings precisely. What it does:

• Fits over the control shaft to allow turning temperature/settings without touching the control stem
• Replaces cracked, stripped, missing, or hard-to-turn knobs
• Restores clear detent positions for accurate setting selection
• Helps prevent accidental changes by seating securely on the shaft

• Before servicing, disconnect power to the appliance and shut off gas supply if applicable
• Pull old knob straight off the control shaft; align replacement onto the shaft and push until fully seated
• Do not use excessive force; inspect the control stem for damage before installation

A replacement selector knob that lets you turn and choose appliance settings smoothly and safely. Restores a damaged, loose, or missing control knob so you can change cycles and temperatures with confidence. What it does:

• Fits onto the control shaft to select functions, cycles, or heat levels
• Replaces cracked, stripped, or worn knobs that won't stay set or slip during use
• Stops erratic control feel and restores a positive detent or indexed rotation
• Works with the matching control shaft shape

• Disconnect power to the appliance before servicing
• Align the knob splines with the control shaft and push straight on until fully seated
• If knob is stiff, check for debris on the shaft; do not force or hammer the knob into place

This control knob replaces a worn, broken, or missing stove/oven knob to restore safe, reliable control and improve the appliance's appearance. It fits directly onto the control shaft for a secure, tactile grip. What it does

• Replaces a damaged or missing control knob so you can set burners or oven functions accurately
• Provides a solid grip and clear pointer for selecting settings
• Stops slipping or spinning caused by a cracked or worn knob
• Helps restore normal operation when the original knob is loose or won't stay engaged

• Disconnect power (unplug appliance or switch off breaker) before servicing to avoid electrical or burn hazards.
• Pull the old knob straight off the control shaft; no special tools typically required.
• Align the new knob's splines with the shaft and push straight on until fully seated.
• Do not force the knob; if it does not fit, check shaft shape and orientation before applying pressure.

This latch knob kit replaces a broken or worn dishwasher door latch knob to restore secure door operation and a finished appearance. It installs at the front of the dishwasher door to engage the latch assembly. What it does:

• Replaces a damaged or cracked door latch knob so the door can be closed and latched properly
• Restores a secure grip for opening and closing the dishwasher door
• Helps eliminate rattling or improper door engagement caused by a missing or loose knob
• Matches white trim and visible door components for a clean finish

• Disconnect power to the appliance before starting any repair
• Removal of the inner door panel or trim may be required; follow the steps
• Handle small parts carefully and keep fasteners organized during reassembly

This genuine replacement pushbutton knob restores a damaged or missing control knob so you can operate your appliance's push-to-select controls easily and reliably. It matches the original shape and finish for a clean, factory look. What it does

• Replaces a broken, cracked, or missing pushbutton knob to restore button-tactile control
• Provides the correct fit and engagement for the appliance's panel-mounted pushbutton switch
• Helps prevent dirt and debris from entering the button assembly
• Matches factory color and finish for a consistent appearance

• One white pushbutton knob

• Disconnect power to the appliance before starting any repair
• Most installs are simple: pull off the old knob and press the new knob onto the button shaft until it seats
• If needed, use a small flat tool gently to lift an old snapped piece;

Restore confident control of your appliance with this replacement control knob. It slides onto the control shaft to provide a secure, accurate grip so you can easily select settings when the original knob is cracked, stripped, or missing. What it does:

• Attaches to the control shaft to select temperature, cycle, or power settings
• Restores positive engagement and smooth turning of the control
• Helps resolve a loose, wobbly, or slipping selector
• Replaces knobs that are cracked, broken, or won't stay on

• One control knob

• Disconnect power; for gas appliances, also shut off the gas supply before servicing
• Pull the old knob straight off the shaft; if your model uses a set screw or clip, loosen/remove it first
• Align the new knob with the shaft and press on firmly; retighten any set screw if present
• Test operation to ensure the knob engages and turns the control smoothly

This slimline standard control knob replaces a worn, cracked, or missing front-panel knob to restore reliable control and a clean appearance. It fits slim-profile control shafts and matches factory styling. What it does:

• Replaces a stripped, broken, or missing control knob so you can operate the appliance again.
• Provides a secure push-on fit to the control shaft for accurate selection of settings.
• Restores original appearance on slimline control panels for a neat finish.
• Works as a direct-fit user interface part—no electronic changes required.

• One replacement slimline standard control knob.

• Typically installs with a simple push-on or pull-off action; inspect the control shaft for damage before installing.
• Disconnect power to the appliance before servicing to avoid injury.
• If knob does not seat smoothly, do not force—verify shaft type and alignment.

This is a round control knob that restores secure grip and accurate control for a range, cooktop, or oven control shaft. Replaces a cracked, stripped, or missing knob so controls turn smoothly and reliably. What it does

• Fits onto a standard control shaft to change heat or function settings.
• Replaces a broken, loose, or missing knob that won't turn or slips on the shaft.
• Restores tactile grip and precise adjustments for temperature or burner selection.
• Helps prevent accidental setting changes caused by a damaged knob.

• One control knob.

• Turn appliance controls to OFF and disconnect power (or gas) before working on the appliance.
• Pull the old knob straight off the control shaft; align splines and push the new knob on until seated.
• If knob resists, verify correct orientation of splines and avoid excessive force.