Thermador Knob, Dial & Button

The Knob is an OEM part for Bosch ovens and ranges, designed to offer precise control over the cooking settings. This knob allows users to set the temperature and cooking mode, ensuring a seamless cooking experience. Crafted with durability and usability in mind, it fits comfortably in the hand, offering a smooth rotation for adjusting settings.  

Causes for a Knob to require replacement can include physical damage from accidental knocks, degradation of materials over time, or the effects of heat and cleaning chemicals that can wear down the text and symbols. 

Symptoms of a bad Knob include:

• Difficulty in turning the knob
• Faded or worn indicators, making it hard to select the correct settings.
• The knob coming loose or falling off

This OEM Bosch part can also be used on Thermador and Gaggenau appliances.

The Vent Control Button is an OEM component specifically designed for select Bosch downdraft ventilation ranges. Pressable from the countertop, its reliable switch operates the vent position. Precise guidance aligns ductwork airflows. 

Symptoms of a faulty control button may include intermittent or unresponsive vent movement. Over-activation degrades contacts requiring change. 

Causes of a bad button relate to typical contact wear reducing conductivity. Splashes introduce moisture necessitating replacement over time.

Causes of a bad vent control button involve:

• Vents remaining stuck open exposing grease-laden air  
• Closed vents trapping cooking emissions near surfaces
• Failure to change vent direction as needed 

This OEM Bosch part is also compatible with some Thermador, Dacor, and Viking downdraft ventilation ranges. Replace to maintain convenient vent management directing smoke and odors safely outdoors.
 

Color: black. Measures about 2 inches in diameter.

Knob, blk (cvs)

The Control Knob is an OEM part for Bosch ranges and cooktops. As the interface regulating gas flow, control knobs activate precise burner levels through internal calibration.

Causes of failure include loosened set screws beneath allowing knob slippage. Prolonged heat and moisture exposure may also degrade contact surfaces over time.

Symptoms of faulty knobs include:

• Burners failing to engage or not matching dial settings
• Inability to decrease output levels from full flame
• Knobs wobbling insecurely or detaching entirely

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This is a replacement control knob that restores safe, easy control of a cooktop or oven function. It provides a secure grip and clear position indication so you can set heat or cycle settings precisely. What it does:

• Fits over the control shaft to allow turning temperature/settings without touching the control stem
• Replaces cracked, stripped, missing, or hard-to-turn knobs
• Restores clear detent positions for accurate setting selection
• Helps prevent accidental changes by seating securely on the shaft

• Before servicing, disconnect power to the appliance and shut off gas supply if applicable
• Pull old knob straight off the control shaft; align replacement onto the shaft and push until fully seated
• Do not use excessive force; inspect the control stem for damage before installation

A replacement selector knob that lets you turn and choose appliance settings smoothly and safely. Restores a damaged, loose, or missing control knob so you can change cycles and temperatures with confidence. What it does:

• Fits onto the control shaft to select functions, cycles, or heat levels
• Replaces cracked, stripped, or worn knobs that won't stay set or slip during use
• Stops erratic control feel and restores a positive detent or indexed rotation
• Works with the matching control shaft shape

• Disconnect power to the appliance before servicing
• Align the knob splines with the control shaft and push straight on until fully seated
• If knob is stiff, check for debris on the shaft; do not force or hammer the knob into place

This replacement plate restores the proper mounting/cover surface specified in your appliance's assembly, helping keep components aligned, protected, and secure for reliable operation. Ideal for replacing a bent, cracked, or missing original.

• Serves as the specified support/cover plate within the assembly
• Maintains alignment and a secure fit for adjacent parts
• Replace when the original is bent, cracked, worn, or missing
• Symptoms can include rattling, misalignment, loose components, or visible damage in the plate area

• Disconnect power and shut off gas/water supplies (as applicable) before servicing
• Refer to your model's parts diagram to locate and orient
• Transfer or reuse original fasteners and seals if in good condition
• Hand-start screws and tighten evenly; verify alignment and smooth operation after installation

This control knob replaces a worn, broken, or missing stove/oven knob to restore safe, reliable control and improve the appliance's appearance. It fits directly onto the control shaft for a secure, tactile grip. What it does

• Replaces a damaged or missing control knob so you can set burners or oven functions accurately
• Provides a solid grip and clear pointer for selecting settings
• Stops slipping or spinning caused by a cracked or worn knob
• Helps restore normal operation when the original knob is loose or won't stay engaged

• Disconnect power (unplug appliance or switch off breaker) before servicing to avoid electrical or burn hazards.
• Pull the old knob straight off the control shaft; no special tools typically required.
• Align the new knob's splines with the shaft and push straight on until fully seated.
• Do not force the knob; if it does not fit, check shaft shape and orientation before applying pressure.

This latch knob kit replaces a broken or worn dishwasher door latch knob to restore secure door operation and a finished appearance. It installs at the front of the dishwasher door to engage the latch assembly. What it does:

• Replaces a damaged or cracked door latch knob so the door can be closed and latched properly
• Restores a secure grip for opening and closing the dishwasher door
• Helps eliminate rattling or improper door engagement caused by a missing or loose knob
• Matches white trim and visible door components for a clean finish

• Disconnect power to the appliance before starting any repair
• Removal of the inner door panel or trim may be required; follow the steps
• Handle small parts carefully and keep fasteners organized during reassembly

This genuine replacement pushbutton knob restores a damaged or missing control knob so you can operate your appliance's push-to-select controls easily and reliably. It matches the original shape and finish for a clean, factory look. What it does

• Replaces a broken, cracked, or missing pushbutton knob to restore button-tactile control
• Provides the correct fit and engagement for the appliance's panel-mounted pushbutton switch
• Helps prevent dirt and debris from entering the button assembly
• Matches factory color and finish for a consistent appearance

• One white pushbutton knob

• Disconnect power to the appliance before starting any repair
• Most installs are simple: pull off the old knob and press the new knob onto the button shaft until it seats
• If needed, use a small flat tool gently to lift an old snapped piece;

This is a push-button replacement used on compatible Bosch appliances to restore proper user-control operation and tactile feedback. Install the button to replace a broken, worn, or missing control button and regain reliable front-panel input. What it does

• Provides a tactile surface for operating a specific front-panel control or selector
• Replaces cracked, stuck, or missing buttons that prevent reliable input
• Restores proper actuation so the underlying switch can be pressed cleanly
• Helps avoid accidental presses from damaged or loose buttons

• One push-button

• Disconnect power to the appliance before attempting any repairs
• Usually snaps into the front panel; remove the control panel or trim if needed to access the button
• Inspect the underlying switch for damage and replace it if the button alone does not restore function

Restore confident control of your appliance with this replacement control knob. It slides onto the control shaft to provide a secure, accurate grip so you can easily select settings when the original knob is cracked, stripped, or missing. What it does:

• Attaches to the control shaft to select temperature, cycle, or power settings
• Restores positive engagement and smooth turning of the control
• Helps resolve a loose, wobbly, or slipping selector
• Replaces knobs that are cracked, broken, or won't stay on

• One control knob

• Disconnect power; for gas appliances, also shut off the gas supply before servicing
• Pull the old knob straight off the shaft; if your model uses a set screw or clip, loosen/remove it first
• Align the new knob with the shaft and press on firmly; retighten any set screw if present
• Test operation to ensure the knob engages and turns the control smoothly

A replacement pushbutton micro switch that restores reliable button response on compatible Bosch control panels. Simple snap-action switch ideal for fixing unresponsive, intermittent, or sticking pushbutton inputs. What it does:

• Detects and registers user pushbutton presses on control panels (momentary action)
• Restores reliable on/off or selection input when a button fails or works intermittently
• Small, snap-action electrical switch used in appliance control assemblies
• Works as the switching contact for specific pushbutton controls

• Disconnect power to the appliance before accessing the control panel to avoid shock or short circuits.
• Remove the control panel or bezel as required to reach the switch; keep track of fasteners and clips.
• Disconnect wiring gently at the terminals and note wire locations before removal.

This griddle cover handle replaces a cracked, loose, or missing handle so you can safely lift and lower the griddle cover. It restores a secure grip and the cover's intended ease of use. What it does:

• Provides a stable grip for lifting and lowering the griddle cover
• Replaces broken, cracked, or worn handle that won't stay secure
• Helps prevent accidental drops or contact with hot surfaces while handling the cover
• Matches the original appearance and mounting location for a clean repair

• Turn off and disconnect power to the appliance before starting any work.
• Allow the griddle and surrounding surfaces to cool completely to avoid burns.
• Use basic hand tools; handle attaches at the cover's designated mounting points—do not force or modify the cover.
• Replace with OEM-specified fasteners.

This replacement switch knob restores tactile control of a range or oven control shaft, letting you safely set heat and function positions. It replaces a cracked, worn, missing, or hard-to-turn knob to improve usability and safety. What it does:

• Fits onto the appliance control shaft to select temperature or function positions
• Provides a stable grip and clear detent feel for accurate setting changes
• Replaces damaged, loose, stripped, or missing knobs that impede control
• Helps restore normal operation when a knob won't turn or slips on the shaft

• Disconnect power to the appliance before attempting service
• Remove the old knob by pulling it straight off the control shaft; align and push the new knob onto the shaft until seated
• If the old knob is stuck, use a firm, even pull—do not twist or pry aggressively to avoid damaging the control shaft

This latch knob replaces a worn or broken door latch knob so you can securely engage and release the appliance door. Durable replacement restores a solid grip and proper operation of the latch assembly. What it does:

• Replaces a cracked, stripped or missing latch knob that prevents normal door opening or closing
• Provides the user interface to engage and release the door latch mechanism
• Helps restore smooth operation when the knob spins, sticks, or won't catch properly
• Matches OEM fit and function for straightforward replacement when compatible

• One latch knob

• Disconnect power and water before beginning repairs
• Access may require removing the inner door panel or trim; follow OEM instructions
• Handle panels and fasteners carefully to avoid damage; do not force parts