Parts for Bosch HDI7282U/04: Top Assy Parts

Replacement burner cap for gas ranges. Covers the burner head assembly. Replace if cracked, chipped, discolored, or missing to restore appearance.

This is the burner base housing for a gas range cooktop surface burner. It sits beneath the burner cap and distributes gas evenly to produce a consistent flame ring. Replace this part if you notice uneven flames, yellow or irregular burning, or if the base is cracked or corroded from spills and buildup.

Replace a cracked, broken, or missing burner support on your range. This structural part holds the burner assembly in place for stable cooktop operation.

This rubber seal provides a watertight barrier where installed, helping prevent leaks and maintain proper appliance performance. It replaces a worn or damaged seal to restore reliable sealing and reduce water damage risk. What it does:

• Creates a watertight seal at the mating surface to prevent leaks
• Helps maintain proper pressure/flow where the seal is used
• Commonly replaced when cracking, hardening, or visible wear appears
• Can stop intermittent leaking or water pooling near the appliance

• One rubber seal (single gasket as shown)

• Replace with the appliance powered off and water supply disconnected
• Clean mating surfaces before installing to ensure proper sealing
• Inspect surrounding components for damage while replacing the seal

Fix uneven flames or poor heat distribution on your gas range. This burner cap protects the burner head and ensures consistent cooking performance.

Fix wobbly burners or uneven flames with this gas range burner housing. Secures surface burner assembly for stable operation and proper alignment.

Replace your worn range door seal to maintain oven heat efficiency and prevent energy loss. Verify fit using your model number for proper installation.

Burner cap for gas cooktops and ranges. Sits on top of the burner head to distribute flame. Replace if cracked, chipped, discolored, or missing.

Burner support bracket for ranges. Mounts beneath the cooktop to stabilize and position the burner assembly. Replace if cracked, bent, or missing.

Replace your range door seal to stop heat loss and improve oven efficiency. This rubber gasket creates an airtight barrier. Confirm fit with your model.

Decorative trim plate for ranges. Installs around controls or edges to cover gaps and provide a finished look. Replace if cracked, chipped, or missing.

This is a replacement oven control board manufactured by Bosch. The oven control board is the oven's brain and handles all the functions. It also includes the display and provides users with the ability to control functionality, like bake and broil, setting timers, and more. While the oven control board does not include moving parts, heat and moisture can damage soldered components and lead to failure. Signs that the control board may need to be replaced include lack of information on the display, inability to control specific functions, or complete lack of operability. Note that this part is often misdiagnosed, so make sure to check the old board's operability with a multimeter before replacing it. To replace the oven control board, first remove the exterior cowling. Locate the wiring harness and disconnect it before removing the mounting screws. Install the replacement part following these steps in reverse.This genuine OEM part is sold individually. It only fits Bosch Thermador ovens.

Rubber grommet cushions and seals range components, reducing vibration and protecting wiring. Replace when cracked, torn, or loose. Confirm fit with model.

This is a sealing ring designed for the pump housing area of a cooktop. It creates a watertight or airtight seal to prevent leaks and ensure proper operation of internal components. Replace this ring if you notice leaking, loss of pressure, or visible cracking and deterioration of the original seal.

Replace your worn, cracked, or missing range oven control knob. Restores smooth temperature selection and cooking function control with a precise fit.

Replace your range's burner jet if it's clogged, damaged, or corroded. This small brass component controls gas flow to the burner for proper flame.

Replace a cracked, clogged, or missing burner jet on your range. This small brass component controls gas flow to the burner for proper flame operation.

This jet holder is the mounting support that secures a dishwasher spray arm nozzle assembly, helping maintain proper spray alignment for consistent cleaning performance. It replaces a worn or broken holder that lets the arm wobble or spin incorrectly. What it does:

• Anchors the spray arm or nozzle assembly so the spray arm rotates smoothly and stays aligned
• Restores proper water spray pattern when a damaged holder allows the arm to wobble or detach
• Helps stop leak paths or reduced cleaning due to misdirected spray
• Works with existing spray arm and fasteners to return normal operation

• One jet holder

• Disconnect power and water to the appliance before starting any repair
• Access typically requires removing the lower or upper spray arm and any kickplate or tub components; retain all fasteners
• Inspect the spray arm and mounting hardware for related wear and replace if damaged

Fix burners that won't light or spark continuously. This igniter electrode restores reliable gas ignition. DIY-friendly repair in about 15 minutes.

This gas valve controls the flow of gas to an individual surface burner on a range cooktop. It connects to the burner control knob and regulates flame intensity from low to high settings. Replace this valve if a burner won't ignite, the flame is uneven or won't adjust properly, or you detect a gas smell around the cooktop controls.

Replace your range valve if burners won't ignite, flame is weak or uneven, or gas won't shut off properly. Common repair for gas flow control issues.

Secures flexible hoses to fittings on your range to prevent leaks. Replace if connections are loose or clamp is damaged. Verify fit with your model.

Oven door sealing strip creates airtight seal for efficient heating. Replace if worn, cracked, or oven struggles to maintain temperature. Verify fit.

This is a filter designed for use in a range or oven, helping to trap grease, food particles, and other debris during cooking. It helps maintain proper ventilation and keeps internal components clean. Replace this filter if it is clogged, damaged, or visibly deteriorated, which can result in poor airflow, smoke buildup, or reduced cooking performance.

Replacement mounting screw for cooktops and ranges. Secures panels, brackets, and components. Needed when original screw is missing, stripped, or damaged.

Converting your range from natural gas to propane? This LP conversion kit includes correctly sized jets for safe burner operation and efficient cooking.

Replacement mounting screw for securing panels, brackets, and components in ranges and wall ovens. Restores proper fit if original is missing or stripped.

Replacement mounting screw for gas ranges. Secures panels, brackets, or internal components. Replaces missing, stripped, or damaged screws.