Parts for Whirlpool WFC7500VW2: 01 - Top And Cabinet Parts

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

This is a control board for a washing machine. There are multiple functions of this part, but the main purpose of the control board is to dictate the rate of speed as a washer spins through its cycles.There are several signs that this part may need to be replaced. If the washing machine is not spinning properly, or if it fails to start, fill, or drain, the board may need to be replaced. When preparing to replace this part it is crucial to unplug the machine from the wall to avoid any potential shock. A quarter-inch nut driver will be needed in order to remove the top panel of the washing machine and reach the electronic control board that needs to be replaced.This part is an authentic OEM replacement part that is directly sourced from the manufacturer. It is made to work with Whirlpool and Maytag washing machines. This laundry washer control board replacement is sold as a single unit.

This flexible replacement hose routes water inside the appliance to restore proper water flow and prevent leaks. Built to match the original shape and connections for a direct-fit repair when the original hose is damaged. What it does:

• Transfers water between internal components to enable normal operation
• Prevents leaks caused by cracks, splits or worn material
• Helps stop intermittent or reduced water flow when the original hose is compromised
• Restores secure connections at existing fittings when installed correctly

• One replacement hose

• Disconnect power and shut off the water supply before starting the repair
• Inspect matching fittings and clamps; reuse only compatible hardware or replace as needed
• Seat hose fully on fittings and secure with appropriate clamps to prevent leaks
• After installation, restore power/water and run a short cycle while checking for leaks

This replacement brace is a stamped support bracket that helps stabilize and secure appliance panels and internal assemblies for proper alignment and operation. Replaces worn or damaged braces to restore structural support and reduce rattling or misalignment. What it does

• Provides structural support to appliance panels or internal components.
• Keeps assemblies aligned to prevent rubbing, vibration, or gaps.
• Helps reduce noise caused by loose or sagging parts.
• Restores mounting strength where an original brace is bent or broken.

• Disconnect power (and water for appliances with plumbing) before starting any repair.
• Basic hand tools are typically required; retain original fasteners unless replacement hardware is provided.
• Inspect surrounding mounting points and replace damaged screws or clips as needed.

This access panel cover protects internal components and provides a finished appearance for your appliance. It replaces a cracked, broken, or missing cover to help keep wiring and parts shielded from debris and accidental contact. What it does

• Covers and protects internal parts behind the control or service area
• Restores the appliance's finished exterior where the original cover was damaged
• Helps prevent debris buildup and accidental contact with internal components
• Can reduce rattling or vibration caused by a loose or broken cover

• Disconnect power (unplug appliance or switch off breaker) before attempting repair
• Basic hand tools are typically required; follow the service manual for removal and installation steps
• Handle edges carefully; some covers may have sharp edges
• Tighten fasteners securely but avoid overtightening to prevent cracking

This door hinge secures and allows smooth pivoting of a refrigerator/freezer door, restoring proper door alignment and sealing for efficient cooling. Designed to replace a worn, bent, or broken hinge to improve door operation. What it does:

• Provides a durable pivot point so the door opens and closes smoothly
• Helps maintain correct door alignment to ensure an even gasket seal
• Stops sagging or binding doors that can cause uneven cooling or door gaps
• Fits the factory hinge location and mounts with existing fasteners

• Inspect mounting screws and surrounding trim; replace any stripped hardware before installing
• Support the door during removal/installation to prevent damage or injury
• Use basic hand tools; tighten screws securely but avoid over-torquing
• Follow the appliance manufacturer's service instructions and disconnect power if working near electrical components

This control panel is the outer console that protects and organizes the appliance's user controls, keeping buttons and displays accessible and tidy. It restores the cabinet finish and provides the mounting surface for switches and overlays. What it does

• Replaces a cracked, warped, or cosmetically damaged console surface
• Secures and positions control switches, buttons, and display components
• Restores a flush, uniform appearance to the appliance front
• Helps prevent dirt and moisture from reaching internal control components

• Disconnect power before starting any repair to avoid shock or injury
• Installation typically requires removing trim or fasteners; keep all hardware for reassembly
• Handle painted or finished edges carefully to avoid scratches; support panel when removing
• Avoid flexing or stressing circuit boards during install

This replacement panel restores the appliance's front control area for a clean, finished look and reliable button access. It helps maintain proper fit and protection for the controls behind the cover. What it does:

• Replaces a cracked, warped, or cosmetically damaged console panel
• Protects switches, buttons, and the control assembly from spills and debris
• Restores even mounting and alignment of the control area
• Helps prevent false button presses caused by broken or misshapen panels

• Disconnect power to the appliance before beginning any repair
• Removal may require removing trim or console fasteners; keep track of screws and clips
• Handle panel carefully to avoid scratching finish; use appropriate hand tools
• If the panel attaches to electrical components, follow OEM instructions.

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

This genuine-style refrigerator water filter cartridge replaces the inline filter that removes common taste and odor issues from your fridge's water and ice dispenser. It helps restore clearer, better-tasting water for drinking and ice-making. What it does

• Filters sediment and common contaminants that can cause cloudy water or unusual taste or odor.
• Helps improve the quality of water used for drinking and ice production.
• Restores normal water flow and dispenser performance when a clogged filter causes slow dispensing.
• Works as the direct replacement filter cartridge for the factory filter assembly.

• Turn off the water supply or follow your refrigerator's shutdown steps before removing the old filter.
• Remove the old filter per the refrigerator manufacturer's instructions and install the new cartridge until it seats securely.
• After installing, run the water dispenser until the water runs clear to flush the system.
• If you smell or see discoloration after installing, re-seat the filter and repeat flushing.

This control panel is the exterior console that houses the oven/range controls and display, restoring the appliance's appearance and providing a mounting surface for buttons and electronics. It replaces a damaged, cracked, or worn front panel to help your controls sit and function correctly. What it does:

• Provides the outer housing and mounting surface for control buttons, touchpads, and the display.
• Restores a secure, flush surface when the original panel is cracked, warped, or cosmetically damaged.
• Helps maintain correct alignment of control components so buttons and switches operate reliably.
• Can address visible damage or wear that affects usability or the appliance's appearance.

• One control panel as shown.

• Turn off power to the appliance at the breaker or unplug before starting work.
• Removal typically requires accessing the console area; keep screws and small parts organized for reassembly.
• Handle painted or glass surfaces carefully to avoid scratches; avoid touching exposed electronics or connectors.

This is a replacement access cover that protects internal components and restores the appliance's finished appearance. It keeps wiring and service areas shielded while providing a neat exterior finish. What it does:

• Covers and protects exposed internal components and wiring from dust and debris
• Restores the appliance's exterior appearance where the original cover was cracked, broken, or missing
• Helps keep service areas clean and prevents accidental contact with non-serviceable parts
• Fits into the existing mounting points to secure panels and trim

• One replacement access cover

• Disconnect power to the appliance before beginning any service
• Remove fasteners or clips holding the old cover; preserve hardware if reuse is intended
• Align the new cover with factory mounting points and secure with the original screws or clips

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.