Parts for Whirlpool WFC7500VW2: 05 - Tub And Basket Parts

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

This replacement hose routes water between appliance components to restore proper flow and stop leaks. It's a direct-fit Whirlpool OEM hose designed to replace worn, cracked, or leaking lines and help restore normal appliance operation. What it does

• Carries water between internal components to enable filling, draining, or circulation
• Replaces cracked, split, or deteriorated tubing that can cause leaks or water pooling
• Helps eliminate symptoms such as visible drips, standing water near the appliance, or weak/slow water flow
• Works as a direct-fit service part when the original hose is damaged or degraded

• One replacement hose as shown

• Disconnect power and shut off water supply before replacing the hose
• Inspect and reuse or replace clamps and fittings as needed
• Route the hose according to the appliance's original layout and secure all connections tightly to prevent leaks
• Test the appliance with a short cycle and check all connections for leaks before completing the installation

This clamp secures flexible hoses or tubing to fittings to help stop leaks and keep connections tight. It's a small but essential fastener for water and drain lines in many appliances. What it does:

• Holds hose or tube to a barb, spud, or fitting to maintain a watertight seal
• Prevents leaks that can cause puddling, dripping, or appliance shutdowns
• Replaces worn, corroded, or broken clamps that no longer tighten properly
• Helps maintain proper hose positioning to avoid kinks or stress on connections

• Disconnect power and shut off water supply before servicing appliances.
• Use the appropriate pliers or clamp tool to remove and re-seat the clamp without damaging the hose.
• Inspect hose ends and fittings; replace hoses that are cracked or severely worn.
• After installation, restore water and power, then run a short cycle and check for leaks.

This trap is the dishwasher drain elbow that channels wastewater from the tub to the drain pump and drain hose, helping prevent large debris from reaching the pump and reducing clogs and leaks. What it does:

• Directs wastewater from the dishwasher tub into the drain pump and drain hose.
• Helps block food scraps and debris from entering and damaging the drain pump.
• Can stop or reduce slow draining, standing water, and intermittent leaks near the pump area.
• Supports proper dishwasher draining and reduces strain on the pump assembly.

• Disconnect power and turn off water supply before starting any repair.
• Inspect and replace any worn clamps, seals, or gaskets when installing the new trap.
• After installation, run a short drain cycle and check for leaks around hose connections.

This Ring-O is a small O-ring seal that restores a watertight connection in compatible Whirlpool appliance fittings. Replacing a worn O-ring prevents leaks and helps the appliance maintain proper water flow and pressure. What it does:

• Creates a watertight seal at joints, hoses or fittings to prevent drips and leaks
• Helps maintain correct water flow and pressure through the sealed connection
• Stops common symptoms like visible leaking, pooling water, or reduced performance at the connection
• Functions as a simple, low-cost wear item that should be replaced when cracked, flattened, or brittle

• One O-ring seal (Ring-O)

• Disconnect power and shut off the water supply before replacing the O-ring
• Remove the old O-ring, clean mating surfaces, then seat the new O-ring evenly in the groove
• Inspect surrounding fittings and hoses for damage; replace any damaged components to ensure a proper seal

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

This counterweight helps balance and stabilize an appliance door, restoring proper closing and alignment for safer, smoother operation. Replace a worn or missing weight to reduce door sag and improve door return. What it does:

• Balances the door to help it close evenly and stay aligned
• Reduces door sag, dragging, or uneven gaps
• Restores correct door return and hinge tension
• Helps stop doors from slipping open or not seating fully

• One counterweight

• Disconnect power and empty the door before starting
• Support the door or hinge assembly while removing/installing the weight
• Basic hand tools required; follow the appliance service manual for exact steps

This replacement water inlet hose carries water to the appliance and restores proper water flow for normal operation. It replaces a worn, cracked, or leaking hose to stop leaks and prevent water-related errors. What it does:

• Channels incoming water from the home supply to the appliance inlet valve
• Stops leaks caused by cracks, splits, or deteriorated hose material
• Helps restore correct fill levels when low or no water is being delivered
• Reduces the risk of water damage from a failing supply hose

• One replacement water inlet hose

• Turn off the water supply and unplug the appliance before servicing
• Inspect and replace any corroded or damaged hose clamps when installing
• Tighten connections securely but avoid overtightening plastic fittings

This motor drive is the drive motor assembly that powers washer drum rotation and agitation, restoring normal spin and wash cycles. It replaces a worn or failed motor assembly to help your washer move and clean laundry effectively. What it does:

• Provides rotational torque to the washer tub and agitator for wash and spin cycles
• Replaces motors that hum, fail to start, or stop mid-cycle
• Helps resolve intermittent or no-spin/no-agitate symptoms linked to a bad drive motor
• Restores smooth operation when the washer won't complete cycles due to drive failure

• Recommended for experienced DIYers; refer to service manual for step-by-step procedures
• Disconnect power and water before beginning any repair to avoid shock or injury
• Handle electrical connections and mounting hardware with care; verify proper alignment before reassembly
• Test the washer on a diagnostic or short cycle after installation to confirm repair

This shock absorber helps stabilize the washer tub by damping movement and reducing vibration for quieter, smoother spin cycles. It replaces a worn suspension shock to restore normal drum control and reduce bouncing. What it does:

• Dampens tub movement and absorbs shocks during agitation and spin
• Helps stop excessive shaking, rocking or banging noises during cycles
• Reduces wear on other suspension components and drivetrain linkage
• Restores proper drum alignment for more even spinning and load balance

• Disconnect power and turn off water supply before beginning any repair
• Support the washer tub or cabinet to prevent sudden drops when removing the old shock
• Inspect mounting pins, springs and surrounding suspension parts for wear; replace as needed
• Replace all affected shocks to ensure balanced performance

This mounting bracket secures a refrigerator door component to the cabinet, restoring proper alignment and support for smooth opening and closing. It replaces a worn or damaged bracket to reduce sagging and noisy operation. What it does

• Provides a stable mounting point for the door assembly and related hardware
• Restores correct door alignment and helps stop uneven gaps or rubbing
• Reduces movement that can cause rattling or binding when opening/closing
• Helps maintain proper seal engagement by keeping the door positioned correctly

• One mounting bracket

• Basic hand tools required; verify power is off and appliance is stable before starting
• Remove the door or trim per your model's service instructions if needed to access the bracket
• Inspect adjacent fasteners and hardware; replace any stripped or damaged screws

This belt links the motor to the appliance's drive system so the machine can turn or move the intended components. When the belt wears, stretches, or breaks, you may notice slipping, noise, or loss of movement.

• Transfers motor rotation to the appliance's drive path for proper operation
• Failing belt symptoms can include squealing/squeaking, burning rubber odor, thumping/slapping, slipping, or no movement/turning
• Visual wear signs: fraying, glazing/shiny spots, cracks, or a stretched/loose fit
• If the motor runs but components don't move, the belt is broken or off its pulleys

• Disconnect power and let any hot surfaces cool before servicing
• Access the belt path and note original routing; photograph for reference
• Release the tensioner (if equipped), remove the old belt, and install the new belt following the original routing
• Manually rotate the system to ensure proper tracking and clearance before reassembly and test

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.