Parts for Electrolux EW30EF65GBA: 07 - Top / Drawer Parts

Interior panel liner for ranges. Installs inside the oven cavity to protect structural components. Replace if cracked, warped, discolored, or damaged.

This panel assembly is the front control console that houses the touchpads and display, restoring user controls and the appliance's interface for normal operation. Replacing a damaged panel brings back responsive controls and a clear display. What it does

• Replaces the appliance's front control panel and button/display interface.
• Restores touchpad/button responsiveness when keys are unresponsive or sticking.
• Fixes visual issues such as missing or dim display characters.
• Prevents control damage from cracked or warped panels that block proper button actuation.

• Disconnect power to the appliance before starting any repair to avoid shock.
• Handle the panel carefully to avoid scratching the finish or damaging the display lens.
• Removal typically requires removing console screws and disconnecting wire harnesses; support the panel while disconnecting connectors.

Replaces cracked, chipped, or shattered inner oven door glass. Installs behind the exterior door panel to restore visibility and proper sealing.

Sound dampening insulation for ranges. Installs inside the cabinet to reduce operational noise. Replace if torn, compressed, or missing for quieter use.

Replaces cracked or missing sound dampening insulation in your range. Installs inside cabinet to reduce noise and vibration during operation.

Sound dampening insulation for ranges. Installs inside the range cavity to reduce noise. Replace if worn, torn, missing, or damaged during repairs.

This oven bake element is the heating element that warms the oven cavity for baking and roasting. Replacing a damaged element restores proper oven heating and helps return cooking performance to normal. What it does:

• Heats the oven interior for baking, roasting and browning.
• Replaces elements that are visibly burnt, cracked, broken, or no longer glow when the oven is on.
• Common symptoms it can fix: little or no heat from the oven, uneven cooking, or an element that sparks or shows burn spots.
• Works as the direct heater inside the oven cavity; connects to the oven terminal block.

• Disconnect power at the breaker or unplug the appliance before starting any repair.
• Access typically requires removing the oven interior panels or rear access panel; support the element while disconnecting terminals.
• Handle terminals and sharp sheet metal carefully; use insulated tools and secure terminal connections.

The Triple Radiant Surface Element is an OEM part for Frigidaire ranges and cooktops. This component features three individual electric coils contained within a single mounting unit.

The triple element provides versatile cooking options with three distinct zones that heat up rapidly and evenly. Whether simmering a sauce or boiling water, this element allows home chefs to prepare multiple recipe components simultaneously. Precise thermostat controls maintain selected temperatures accurately.

Causes of bad triple elements can include broken internal wiring from shifting or impact over time, or mineral buildup impeding heat transfer and coverage.

Symptoms of failure include:

• Only one or two coils heating up out of three
• Discoloration, cracking or pitting of the coil surfaces
• Coils that pulse or cycle excessively in lower heat settings

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.
 

Burner not heating? This 6-inch surface heating element restores cooktop function. DIY repair in 10-30 minutes with basic tools and simple instructions.

Replace your damaged or cracked range glass cooktop assembly. This main top installs over the heating elements and burners, restoring appearance and safety.

Replacement spacer for your range. This small structural component maintains proper clearance between parts. Order a new one if yours is cracked or missing.

This replacement channel is the support bracket that guides and stabilizes a refrigerator drawer or shelf, helping keep components aligned for smooth opening and closing. Use it to replace damaged or worn channels. What it does

• Guides and supports a drawer or shelf to maintain proper alignment
• Reduces sticking, binding, or uneven drawer movement
• Helps eliminate rattling or excessive play in the drawer/shelf assembly
• Restores the intended fit of the drawer/shelf to prevent gaps or misalignment

• One channel

• Disconnect power to the appliance before starting any repairs
• Remove the drawer or shelf per the appliance disassembly steps to access and replace the channel
• Inspect mounting tabs and fasteners; replace any damaged clips or screws as needed

Fix F10 error codes and inconsistent oven temperatures with this sensor probe. Monitors internal temp for accurate cooking. Moderate DIY repair.

This replacement part is a black element mounting clip used in ranges or wall ovens. This clip is used for surface elements on electric ranges and ovens. The clip itself connects the surface of the element to the support bracket which allows the stove to heat up. The user might need a new clip or clips if the heating element on the stove is loose, if the heating element is completely detached, or if the clip itself is bent or broken. This clip is black and made of sturdy metal that can withstand heat as well as strain on the clip itself. Installation of this clip is very simple as it just requires replacing the old one with a new one and making sure it is secure. Pliers might be required if the old clip is bent or stuck near or on the heating element. There are no special tools needed for this repair. This is an OEM part sourced directly from the manufacturer. It is sold individually. This part is compatible with machines from Frigidaire and other brands like Electrolux, Gibson, Kelvinator, Crosley, Westinghouse, and more.

Oven not heating properly or baking unevenly? This bake element heats the oven cavity to reach and maintain baking temperatures for cooking and roasting.

Replace your damaged or worn range side panel. This exterior cabinet panel installs on the side of your range to restore its appearance and structure.

This replacement control panel restores the appliance's front console so you can access controls and maintain the unit's appearance. It fits where the original panel mounted and matches OEM form and function. What it does:

• Provides the front console surface and button/selector openings for normal control operation
• Replaces cracked, scratched or cosmetically damaged panels to restore appearance
• Helps resolve issues where the panel surface is broken or buttons cannot be used due to damage
• Matches OEM mounting points for a direct-fit replacement

• Disconnect power to the appliance before beginning any repair
• Handle edges gently; panels can have sharp sheet-metal or plastic edges
• Basic hand tools are typically required; keep mounting screws and clips for reuse

Touch-up paint for electric ranges. Covers scratches, chips, and worn spots on exterior surfaces. Essential for restoring appearance after damage.

This is a replacement mounting screw used to secure the dual safety valve assembly on compatible gas ranges and ovens. It restores proper fastening so the valve stays firmly in place during operation. What it does

• Secures the safety/dual gas valve to the appliance chassis or manifold
• Prevents valve movement that can interfere with burner operation or alignment
• Commonly replaced when original screw is missing, stripped, or damaged
• Matches OEM thread size and length for correct fit and retention

• One (1) screw, size 10-16 x 0.486

• Disconnect power and shut off gas supply before starting work; follow all safety procedures
• Thread carefully to avoid cross-threading; do not overtighten — snug to OEM torque specification
• Inspect surrounding mounting holes and hardware; replace any stripped or damaged parts for a secure fit

Size: 6-20 x 0.312 inch.

Chrome screw secures handles, door trim, and internal components in ranges and ovens. Replace if lost during cleaning, stripped, or missing after moves.

Chrome screw secures handles, door trim, and internal components in ranges and ovens. Replace if lost during cleaning, stripped, or missing after moves.

Size: 3/4 inch od x 1/4 inch id.