Parts for Kenmore 790.93012316 (79093012316, 790 93012316): Top / Drawer Parts

Replaces a damaged, cracked, or missing bottom drawer on your range. Restores smooth slide action and a flush, finished look to the storage compartment.

This is an interior liner panel designed to fit inside the storage drawer beneath the range oven cavity. It provides a smooth, finished surface that protects the drawer interior and makes cleanup easier. Replace this liner if it is warped, cracked, rusted, or damaged from heat exposure.

This is the front-facing panel for the storage drawer located beneath the oven cavity. It provides a finished exterior appearance and attaches to the drawer frame. Replace this panel if it is dented, scratched, warped, or if the black finish has become discolored or damaged.

Range drawer glide enables smooth sliding of lower storage or warming drawers. Replace if drawer sticks, binds, or doesn't close properly. Verify fit.

This glide is a replacement drawer slide that helps refrigerator/freezer drawers open and close smoothly and stay aligned. It restores proper drawer movement and reduces sticking or scraping for easier access to stored items. What it does:

• Supports and guides the drawer along its track for smooth sliding motion
• Helps prevent drawer sagging, misalignment, and binding
• Reduces noise and scraping when opening or closing the drawer
• Restores proper engagement with the cabinet track for secure drawer operation

• Remove the drawer before replacing the glide; follow the appliance owner's instructions
• Inspect the cabinet track and adjacent parts; replace any damaged components for proper fit
• Use basic hand tools; avoid forcing parts to prevent breakage

Range drawer glide ensures smooth opening and closing while keeping drawers aligned. Replace when drawers stick, scrape, or misalign. Confirm fit with model.

Drawer slide glide for electric and gas ranges. Replace if cracked, broken, or worn to restore smooth, aligned drawer movement and eliminate sticking.

Burner not heating evenly or won't turn on? This surface coil element restores full heat output on electric ranges. Direct plug-in replacement.

This is a 9-inch radiant heating element that sits beneath the glass cooktop surface on an electric range. It converts electrical energy into heat to warm pots and pans placed above it. Replace this element if the burner won't heat, heats unevenly, glows only partially, or has visible damage such as cracks or burn spots.

Burner not heating? This 6-inch surface heating element restores cooktop function. DIY repair in 10-30 minutes with basic tools and simple instructions.

Replaces the upper cooktop surface on your electric range. Restores appearance when scratched, dented, or damaged. Covers burners and protects interior.

Replacement cooktop surface panel that covers your range's burner area. Restores a clean, stable cooking surface when the original is cracked, damaged, or worn.

This is a metal hinge bracket that secures the main cooktop to the range frame and allows it to be lifted for access to components underneath. It connects the cooktop panel to the body of the range at the hinge point. Replace this bracket if it is bent, broken, or missing, which can cause the main top to sit unevenly or not stay properly secured.

Secures internal components and panels in your range. Replace this mounting bracket if cracked, broken, or missing to restore proper support and alignment.

Mounting bracket for electric and gas ranges. Secures components in place. Replace if bent, cracked, or broken to restore proper fitment and stability.

This replacement part is a black element mounting clip used in ranges or wall ovens. This clip is used for surface elements on electric ranges and ovens. The clip itself connects the surface of the element to the support bracket which allows the stove to heat up. The user might need a new clip or clips if the heating element on the stove is loose, if the heating element is completely detached, or if the clip itself is bent or broken. This clip is black and made of sturdy metal that can withstand heat as well as strain on the clip itself. Installation of this clip is very simple as it just requires replacing the old one with a new one and making sure it is secure. Pliers might be required if the old clip is bent or stuck near or on the heating element. There are no special tools needed for this repair. This is an OEM part sourced directly from the manufacturer. It is sold individually. This part is compatible with machines from Frigidaire and other brands like Electrolux, Gibson, Kelvinator, Crosley, Westinghouse, and more.

This is a replacement mounting screw used to secure the dual safety valve assembly on compatible gas ranges and ovens. It restores proper fastening so the valve stays firmly in place during operation. What it does

• Secures the safety/dual gas valve to the appliance chassis or manifold
• Prevents valve movement that can interfere with burner operation or alignment
• Commonly replaced when original screw is missing, stripped, or damaged
• Matches OEM thread size and length for correct fit and retention

• One (1) screw, size 10-16 x 0.486

• Disconnect power and shut off gas supply before starting work; follow all safety procedures
• Thread carefully to avoid cross-threading; do not overtighten — snug to OEM torque specification
• Inspect surrounding mounting holes and hardware; replace any stripped or damaged parts for a secure fit

Size: 6-20 x 0.312 inch.

Chrome screw secures handles, door trim, and internal components in ranges and ovens. Replace if lost during cleaning, stripped, or missing after moves.