Parts for Kenmore 790.99114301 (79099114301, 790 99114301): Top / Drawer Parts

This control panel is the main user-console for the appliance, giving you a replaceable interface to operate settings and cycles while restoring the unit's outward appearance and button/control function. What it does:

• Provides the user interface for selecting cycles, options and settings.
• Hosts touchpads/buttons and display openings used to control the appliance.
• Replaces cracked, warped or cosmetically damaged front panels.
• Can resolve unresponsive buttons or a non-functional control surface when the underlying electronics are intact.

• One control panel (main console) as shown.

• Disconnect power before beginning any repair to avoid electrical shock.
• Some models require removing trim, bezels or the control housing to access mounting screws.
• Handle carefully to avoid scratching or damaging finishes; retain any snaps or clips for proper fit.
• If electronic components are attached, transfer them to the new panel or replace only if the part explicitly includes them.

A replacement hex-head screw used to secure appliance regulator brackets and similar small components. Restores proper fastener fit so panels and brackets stay firmly attached. What it does

• Fastens regulator bracket and related sheet-metal components
• Provides a secure threaded connection for components where an 8-18 thread is specified
• Helps eliminate looseness or rattling caused by a missing or damaged screw
• Matches the nickel/chrome finish commonly used on interior mounting locations

• One hex head screw (8-18 x 3/8), nickel finish

• Intended for use where an 8-18 x 3/8 hex screw is specified by the manufacturer
• Tighten to snug; avoid over-torquing which can strip sheet-metal threads
• Turn off power to the appliance before accessing internal components
• If the original screw used a lock washer or threadlocker, replace or reapply as appropriate

Chrome screw secures handles, door trim, and internal components in ranges and ovens. Replace if lost during cleaning, stripped, or missing after moves.

Chrome screw secures handles, door trim, and internal components in ranges and ovens. Replace if lost during cleaning, stripped, or missing after moves.

Left inner drawer slide guide for ranges. Replaces broken, cracked, or worn drawer glides that cause sticking or misalignment. Direct fit part.

Right inner drawer glide for range warming or storage drawers. Replaces cracked, broken, or worn glides causing drawer misalignment or difficulty sliding.

This is a 100 watt, 120 volt surface warming element. Includes limiter.

Cooktop burner not heating? This radiant element restores heat to non-working zones on glass-top ranges. Moderate DIY repair with oven access required.

The Frigidaire Touch-Up Paint is white in color in a .6 fl oz bottle. For almond order 5303321320. For black order 5303321321.

The Touch Up Paint is an OEM part for Frigidaire appliances. Whether you're dealing with scratches, chips, or other minor cosmetic damage, this touch-up paint provides an easy and effective solution for maintaining the appearance of your appliance. It's designed to adhere well to metal surfaces, offering durability and resistance to further wear and tear.

Over time, appliances can accumulate minor surface damage from regular use, cleaning, and accidental impacts. Using the Touch Up Paint not only improves the aesthetic appeal of your appliance but also helps protect exposed areas from rust and corrosion, which can extend the life of the appliance.

Symptoms of needing Touch Up Paint include:

• Visible scratches or chips on the appliance's surface.
• Areas of rust or corrosion that need to be covered after treating the rust.
• The desire to maintain or improve the appliance's appearance for aesthetic reasons or to maintain its value.

Burner not heating? This 6-inch surface heating element restores cooktop function. DIY repair in 10-30 minutes with basic tools and simple instructions.

Touch-up paint in bisque color for appliance exterior surfaces. Covers chips, scratches, and worn spots on refrigerator doors, range panels, and more.

Touch-up paint for appliances to cover scratches, chips, and worn areas on exterior surfaces. Restores appearance of refrigerators, ranges, and more.

Size: 8-18ab x 0.5 inch.

Right-hand hinge bracket for gas range main top. Secures the cooktop hinge assembly. Replace if cracked, bent, or missing to restore proper alignment.

Left-hand hinge bracket for gas range main top. Secures and supports the range top hinge assembly. Replace if bent, cracked, or broken to restore proper fit.

Size: 10-32 x 0.312 inch. Color: Black.

Size: 8-32t x 0.500 inch. Color: Black.

Size: 6-20 x 0.312 inch.

Replace your range's wire harness if wires are frayed, connectors are damaged, or the harness is broken. Essential for restoring electrical connections.

Replace the channel trim on your range door when it becomes cracked, broken, or damaged. This structural component installs along the door edge for a secure fit.

Anti-tip warning label for electric ranges. Replaces faded, peeling, or missing safety labels on the anti-tip bracket. Ensures compliance with safety standards.

Replacement handle for your range door. Installs on the front exterior to provide a grip for opening and closing. Order if your current handle is cracked or broken.

This is a heating element designed for the warming drawer of a range. It provides low, consistent heat to keep food warm after cooking. Replace this element if your warming drawer no longer heats, heats unevenly, or has visible damage such as cracks or burn marks.

Mounting bracket that secures the heating element in your range. Replace this bracket if it's bent, broken, cracked, or missing to properly support the element.

This metal rack fits inside the warming drawer beneath the oven, providing a flat surface to hold plates, dishes, or cooked food at a warm serving temperature. It slides in and out of the drawer on built-in guides. Replace it if the rack is bent, warped, rusted, or missing, which can prevent proper food placement and even heat distribution in the warming drawer.

Secures your range warmer drawer in place. Replace if drawer slides open, won't stay closed, or clip is broken. Verify fit with your model number.

Hex head screw for securing range components. Replace if stripped, rusted, or missing to ensure proper assembly and secure mounting of panels or parts.