Parts for Dacor RGC365SNG: Top Frame Parts

This spill protector is the replacement assembly that prevents water and ice spills from entering the dispenser cavity and related compartments. It helps restore proper water containment and reduces moisture buildup where the dispenser dispenses. What it does:

• Directs dispensed water and melt-off away from sensitive cabinet areas to reduce leaks and pooling.
• Helps stop drips that can cause stains, odors, or premature component wear near the dispenser.
• Commonly replaced when you see pooling, unexplained moisture under the dispenser, or intermittent dripping during dispense.
• Works as a passive containment part — does not include valves, sensors, or pumps.

• 1 spill protector assembly

• Disconnect power to the appliance before attempting any service to avoid electrical shock.
• Confirm the dispenser area is empty and dry; remove nearby trim or access panels as needed per OEM instructions.
• Handle plastic parts carefully to avoid cracking; align tabs and fasteners before snapping into place.
• If you find additional damage (broken clips, cracked trim, or leaking water lines), replace those components as well per OEM guidance.

This top cap cover replaces a damaged or missing service top cap to restore the appliance's top-panel fit and appearance. It provides a finished edge and helps keep the service area protected from debris and wear. What it does:

• Covers and protects the service/top access area on the appliance top panel
• Restores proper fit and appearance where the original cap is cracked, broken, or missing
• Reduces noise and vibration caused by loose or misaligned top trim
• Helps keep dust and lint out of the service cavity

• Disconnect power before servicing to avoid shock or injury
• Removal of the top panel or service access screws may be required; use appropriate hand tools
• Handle plastic trim gently to avoid cracking clips or mounting tabs
• If clips are damaged, replace them to ensure a secure fit

This replacement surface burner head restores the correct burner cap and ring for a gas cooktop's single surface burner, helping ensure stable flame pattern and proper cookware support during cooking. What it does:

• Directs and shapes the burner flame for even heating across cookware
• Replaces damaged, warped, or corroded burner heads that affect flame quality
• Helps correct uneven or sputtering flames and poor simmer performance
• Fits a single surface burner location on compatible Samsung gas cooktops

• Turn off the gas supply and power to the appliance before servicing
• Allow the cooktop to cool completely before removing/installing the burner head
• Remove the old burner head, seat the new head on the burner base, and hand-tighten; ensure proper alignment of ports
• After installation, test for proper ignition and flame shape; if you smell gas or ignition fails, stop.

This inner burner base replaces the damaged or warped bowl that sits beneath the burner cap, helping restore even flame shape and safe gas flow on compatible gas cooktops and ranges. What it does:

• Supports the burner cap and directs the gas flame for proper cooking performance
• Helps protect the cooktop surface from spills and heat damage
• Can reduce uneven heating or unstable flames caused by a cracked or deformed bowl
• Matches OEM fit and function when the original bowl is broken, corroded, or warped

• One inner burner base

• Turn off gas supply and unplug the appliance before servicing
• Remove burner cap and grate, then lift out the old bowl and place the replacement in the same position
• Use care to avoid damaging nearby igniters or gas ports; ensure ports are clear before reassembly

A small metal retainer clip that secures dual-burner components in place to keep the burner assembly aligned and stable during operation. Replacing a worn or missing clip restores proper positioning and reduces burner movement. What it does:

• Secures the dual-burner assembly and related components to prevent shifting
• Helps maintain correct alignment for reliable ignition and combustion
• Prevents rattling or loose burner parts during use
• Supports safe, consistent burner operation when correctly installed

• Turn off gas supply and power to the appliance before starting work.
• Use basic hand tools; handle clip edges carefully to avoid cuts.
• Ensure clip is fully seated and locking points engage; test burner operation after installation.

The Cross Ring Skirt D Dual for Gas Line Trimmer is an essential component designed to maintain the performance and reliability of your gas line trimmer. Crafted as a genuine OEM part, it ensures a perfect fit and seamless integration with your existing equipment. This sturdy skirt enhances the durability of your trimmer, providing effective protection against wear and tear during operation. By replacing worn or damaged parts with this Cross Ring Skirt D Dual, you can restore your trimmer's efficiency and extend its lifespan. Compatible with a variety of gas line trimmer models, this part guarantees easy installation and optimal performance. Investing in this genuine OEM part means you are choosing quality and reliability, ensuring your trimmer operates smoothly and effectively every time. Whether you are a professional landscaper or a dedicated homeowner, the Cross Ring Skirt D Dual for Gas Line Trimmer is the ideal solution to keep your gas line trimmer running at its best.

This Torx-head #6-32 replacement screw secures the refrigerator service pan and related trim pieces, restoring proper fit and preventing pan movement. Use it when a screw is missing, stripped, or corroded. What it does:

• Fastens the service pan or service-panel trim to the cabinet to keep parts aligned
• Prevents rattling or shifting that can occur from a missing or loose fastener
• Replaces stripped or corroded factory screws for a secure hold
• Works with standard Torx drivers for straightforward removal and installation

• Disconnect power to the appliance before starting any repair
• Remove the access panel or service pan per the manufacturer's instructions to reach screw locations
• Use the correct Torx driver to avoid cam-out or screw head damage
• Do not overtighten; snug until secure to avoid stripping threads or deforming plastic parts

The Lawn Mower Washer No. 6 Type B is a crucial component for maintaining your Samsung walk-behind lawn mower. This genuine OEM part is designed to ensure a perfect fit and reliable performance, helping to keep your mower operating smoothly. Made specifically for Samsung models, the Washer No. 6 Type B provides essential support and stability, reducing vibrations and preventing unnecessary wear on other parts. Installing this washer is straightforward, allowing you to quickly restore your lawn mower's functionality without the need for professional assistance. By choosing the Lawn Mower Washer No. 6 Type B, you are investing in quality and durability, ensuring your equipment remains in excellent working condition for years to come. Enhance the efficiency and longevity of your walk-behind lawn mower with this dependable genuine OEM part, and enjoy a hassle-free mowing experience every time.

Note: Set of 4 pads