Parts for Magic Chef MCO165UW: Total Assy Parts

Turntable stopped rotating or making noise? This synchronous motor drives the glass tray for even heating. Easy DIY fix—unplug, remove base screws, swap motor.

Microwave runs but won't heat or start when door closes? This door interlock switch detects door position and completes the circuit for safe operation.

This is a replacement circuit board switch that restores user control and electrical continuity on the appliance. It installs on the control assembly to help return reliable on/off or command inputs. What it does:

• Acts as the on/off or command actuation point on the control board, closing and opening the electrical circuit when pressed or toggled
• Restores responsive control when a worn or failed switch causes unresponsive buttons or intermittent function
• Can stop intermittent power or erratic control behavior caused by a faulty switch contact
• Works as the user-interface switching component tied to the appliance's control electronics

• For appliance use only; disconnect power before accessing the control board to avoid shock
• Handle the switch and circuit board by edges to avoid static damage; use ESD precautions when possible
• Verify connector orientation and seating before reassembly; test function with power restored only after reassembly

This is a replacement circuit board switch that restores user control and electrical continuity on the appliance. It installs on the control assembly to help return reliable on/off or command inputs. What it does:

• Acts as the on/off or command actuation point on the control board, closing and opening the electrical circuit when pressed or toggled
• Restores responsive control when a worn or failed switch causes unresponsive buttons or intermittent function
• Can stop intermittent power or erratic control behavior caused by a faulty switch contact
• Works as the user-interface switching component tied to the appliance's control electronics

• For appliance use only; disconnect power before accessing the control board to avoid shock
• Handle the switch and circuit board by edges to avoid static damage; use ESD precautions when possible
• Verify connector orientation and seating before reassembly; test function with power restored only after reassembly

Replace a cracked or missing microwave lamp cover to restore proper interior lighting. Shields the bulb from grease and impact. Simple DIY fix in minutes.

Secures and powers your microwave's interior light bulb. Replace if bulb won't stay in place or light doesn't work. Verify fit with your model number.

This thermostat is the temperature control that regulates cooling cycles to keep the appliance operating within the correct range. Replaces a failed or intermittent control to restore normal temperature regulation and cycling. What it does

• Senses temperature and signals the compressor or heating element to turn on/off as needed.
• Stops excessive cycling and helps maintain steady interior temperature when the original thermostat fails.
• Commonly used to address symptoms such as inconsistent temperatures, unit running constantly, or compressor not starting.
• Works as a direct replacement when the original thermostat is damaged, corroded, or shows open/short electrical readings.

• One thermostat.

• Disconnect power to the appliance before beginning any repair to avoid shock or injury.
• Install in the same orientation and secure mounting to avoid pinched wires or damaged sensing elements.

Fix a microwave that runs but won't heat food. This magnetron generates the microwaves that cook your meals. Moderate difficulty repair with proper safety precautions.

Air guide for microwave ovens. Directs airflow for proper ventilation inside the microwave cavity. Replace if cracked, broken, or missing during repairs.

BULB ONLY - For socket, order 3513003000.

Fix a microwave that won't heat or has no power adjustment. This high voltage capacitor is a common cause. Requires careful handling due to residual charge.

Noise filter and fuse assembly for microwaves. Mounts internally to reduce electrical interference and provide circuit protection. Replace if damaged or blown.

Replacement air deflector for your microwave. This internal component directs airflow properly. Order a new one if yours is cracked, broken, or missing.

This inline water filter removes common impurities to improve taste and clarity of refrigerator water and ice. Fits as a direct replacement for the same-style cartridge to restore normal flow and water quality. What it does

• Filters sediment, chlorine taste and odor commonly found in household water supplies
• Helps improve taste and appearance of drinking water and ice
• Can resolve reduced flow or mildly cloudy water when an old filter is clogged
• Designed for use with compatible refrigerator water lines and dispensing systems

• Turn off refrigerator water supply before removing the old filter to avoid leaks.
• Follow refrigerator manufacturer instructions for filter orientation and connection type.
• Flush several gallons of water through the new filter after installation to clear carbon fines and air.
• If tools are required, use the correct-size fittings and check all connections for leaks before restoring normal use.

Microwave won't turn on or powers off intermittently? A damaged power cord often causes connection loss. Restores safe electrical connection in 5 minutes.

Replacement roller guide for your microwave turntable. Supports and stabilizes the glass tray for smooth rotation. Order now if yours is cracked or worn.

This mounting bracket is a genuine OEM replacement part sourced directly from the manufacturer for use mounting microwave ovens to walls. The mounting bracket attaches the microwave to studs in the wall to hold it above the countertop. Mounting the microwave on a wall frees up counter space and puts the microwave at eye level, making it easier to see the contents inside when cooking. The mounting bracket is designed to hold the weight of the microwave but should be installed in studs to make sure the microwave does not fall. Locate the studs in the wall before installation. The ideal location will have an electrical outlet close enough to reach without having to install a new outlet. Mark the stud locations and use the mounting bracket template to line up the holes. Install the mounting bracket to the studs in the wall. Position the microwave on the brackets and secure it to the bracket with the fasteners in the mounting bracket hardware package. Plug the microwave into the outlet.This microwave mounting bracket of heavy-duty metal and sold individually. It does not come with the template or hardware. It is designed for use with microwaves manufactured by Maytag.