Parts for Mtd 13ALA1ZT091: Tractor Parts

This air cleaner filter is a genuine MTD part, sold individually. This air cleaner filter can be used as a replacement part in a lawn mower. The purpose of the air cleaner filter in a lawn mower is to protect the internal machinery from debris. To ensure the lifespan of a lawn mower, the air cleaner filter should be checked regularly and replaced if it is damaged or significantly dirty.This is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This air cleaner filter is compatible with the following outdoor appliance brands: MTD, Briggs & Stratton, Toro, and Simplicity.

This replacement ground drive or blade drive belt is for lawn tractors. The function of the belt varies depending on the model. This belt model can serve a wide variety of purposes on different tractor/mower models, such as turning the mower blades or transferring motive power from the transmission. Over time, the belt can stretch, potentially snap, and will need to be replaced.A visual inspection of the belt is all it takes to know if a mower belt is beyond its life. The signs that it needs to be replaced are: the belt has sidewall damage, it has a glazed or burnt sidewall, or the belt is cracked or broken. Replacing the belt is simple and it will not take a lot of time.This is an OEM part sourced directly from the manufacturer, and it is sold individually.

The nut-hex flange 5/8-18 features a hex nut with a wide flanged portion at one end. This flange will act as an integrated washer that does not spin. Since the flange acts as a washer, it ensures that the nut can fasten to the material's surface evenly. If any of these nuts are removed from a machine to do other work, it is recommended to replace them with a new nut-hex flange. Check the nuts that are currently on the machine at least once a year. Make sure they are properly tightened and that they are in good condition. Replace them as needed. This OEM part will work for many types of equipment, including lawnmowers, edgers, snowblowers, and lawn tractors. The part will work with many brands, including Ryobi, Poulan, Bolens, Yard-Man, MTD, Yard Machines, and Troy-Bilt.

High blades are used on lawnmowers and perform well in all conditions. They are curved on the ends more deeply than low blades, which creates more suction to circulate the cut grass and discharge the clippings more efficiently. High blades work well in deep or wet grass and are less likely to cause clogging. High blades can wear out or become damaged with time and will require replacement.To replace a high blade for a lawnmower, find out what corresponding sized wrench is required to loosen the bolts affixing the current blade. Ensure that the lawn tractor is completely cool before starting, and always wear gloves when working with lawn tractor blades. Remove the old blade, and clean up around the area where the new blade goes before installing and securing it tightly.The high blade is an authentic OEM part made by the MTD manufacturer. The blade is 23.5 inches and is only compatible with the MTD brand lawn tractors with the matching star pattern. It is made of durable, high-quality metal. This is a single lawnmower blade. If two lawnmower blades are required, they must be ordered separately.

This spindle assembly is a genuine MTD part, sold individually. This spindle assembly can be used as a replacement part for a lawn mower. The spindle assembly comes with all of the necessary components required to install the spindle. The purpose of the spindle is to rotate the blades so they cut the grass and greenery evenly when in operation.If the spindle is punctured, torn, or otherwise eroded from general wear and tear with long-term use or from a direct impact with a hard object, it should be replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This is an OEM part sourced directly from the manufacturer. It is sold individually. This spindle assembly is compatible with the following outdoor appliance brands: MTD, Cub Cadet, Craftsman.

This is a replacement grass chute assembly. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part is intended to replace a broken or detached grass chute assembly on various lawnmower models. The grass chute assembly allows grass clippings to be efficiently discharged from the lawnmower. Over time, this part can experience wear and tear and may need replaced. It is always recommended that the appropriate safety precautions are adhered to when attempting to fix any power tools or machinery. When working on or near an engine or lawnmower blades, ensure the equipment is powered off and completely cooled down before starting any repairs. Proper tools may be required to replace this part and work gloves are advised. For more accurate information on how and where to install this grass chute assembly, reference the appropriate owner's manual and included diagrams.As an authentic replacement part, this grass chute assembly is suitable for use on several different lawn mower models manufactured by MTD, Craftsman, and Cub Cadet. This is a genuine part made of high-quality, durable plastic and is sold individually.

This replacement part is a fuel cap and is intended for use in different types of lawn equipment. This is a genuine replacement part made by MTD. The fuel cap is one of the most important tools in many lawn devices. This part is connected with a wire to the body of the machine, and ensures that the fuel cap does not go missing. The fuel cap is able to attach to the device and seals the fuel tank shut. This is so that no fuel leaks during use.A new fuel cap might be needed if the current one is damaged, broken, or missing from the wire that connects it to the machine. Be aware that while replacing the fuel cap the device can leak fuel. To ensure a swift clean-up, have a towel handy or perform the repair outside. This replacement part is a genuine OEM part and is sourced directly from the manufacturer.

This oil filter is an OEM replacement part sourced directly from the manufacturer for use on lawn mowers and lawn tractors. The oil filter removes contaminants from the oil that accumulates over time from the dirt and debris flying around when the grass is cut. If the oil filter becomes clogged, the engine won't have enough power to operate correctly, the engine may sputter, or there may be smoke coming from the exhaust. The oil filter should be checked every time the oil is changed and any time there are symptoms of a dirty air filter. The oil filter does not require tools to remove and replace. However, the engine should be cool and the key and spark plug removed for safety. Park the lawnmower on a flat surface and locate the oil filter. The filter is threaded. Turn it to remove the oil filter from the lawnmower. Dispose of the old filter. Screw the new filter in and return the spark plug. Start the engine and look for smoke or any signs that there is oil coming out.This oil filter is a yellow metallic part that is sold individually. This oil filter is designed for use in lawn mowers and tractors designed by MTD and Cub Cadet.

This part is a replacement starter solenoid. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can be used to replace a defective or damaged solenoid in a variety of lawn tractor models.When the engine's ignition is turned on, the starter solenoid routes the electricity generated by the battery to the engine starter. This part will eventually need replacing if damaged or with regular equipment use. A wrench and screwdriver will be required to replace this part. It is always recommended that the appropriate safety precautions are adhered to when attempting to fix any power tools or machinery. When working on or near to an engine, ensure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this starter solenoid, the appropriate owner's manual and included diagrams should be referenced.As an authentic replacement part, this solenoid is suitable for use on several different models of lawn tractors manufactured by MTD, Troy-Bilt, Yard Machines, Cub Cadet, and Husky. This is a genuine part made of high-quality, durable materials and is sold individually.

This is a spark plug that is installed on a variety of different outdoor power equipment. A spark plug is a component that delivers the electric current from the ignition system to the internal combustion engine. One spark plug is included in this package. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment.The spark plugs can get dirty, and then they will require a replacement. Never perform care and maintenance on an appliance that is powered on.This spark plug is a genuine OEM MTD part. It is sold individually. This specific spark plug is compatible with snowblowers, lawnmowers, lawn tractors, log splitters, and blowers that are manufactured by MTD, Yard Machines, Troy-Bilt, Bolens, Yard-Man, and Cub Cadet.

When interlock switches are working properly, they will keep the engine from starting if there is no foot is not on the brake or if the parking brake is not set. When the switch breaks, it will not allow current to reach the starter even when the brake is on, which means the engine will not start. If the solenoid is not clicking when the ignition key on the tractor or mower is turned, the interlock switch is likely to blame. This is a genuine OEM replacement interlock switch that can help get a lawn tractor up and running again. Is is compatible with riding tractors and mowers from many different brands, including Craftsman, Bolens, Yard Machines, Yard-Man, MTD, and Troy-Built.

This replacement part is an ignition module switch. It connects to the engine and allows the user to power equipment.If the engine is not starting up or is having trouble starting, the ignition module switch may be malfunctioning. With extended use, the connections in the switch could wear down or break, severing its connection to the engine.This is a genuine OEM replacement part manufactured by MTD. This part is sold individually.