Parts for Craftsman 316792640: Trimmer Attachment Parts

This is an accessory hanger that is intended for use with a variety of lawn and garden equipment. It attaches to equipment so the tool can be hung up for storage. The hanger can help to ensure that tools are easy to access in an out of the way space.The hanger that is currently on the machine could be damaged or could crack after a lot of use, and it might need to be replaced. It is an easy replacement and should only take a matter of minutes at most.This hanger can be used with trimmers, edgers, pruners, blowers, and cultivators from Ryobi, Troy-Bilt, MTD, and Cub Cadet. Each hanger is sold individually. Owners with multiple pieces of equipment will want to buy as many as needed. This is a genuine OEM part sourced from the manufacturer.

This screw and nuts set is a genuine MTD part, sold individually. This screw and nuts set can be used as a replacement part in a string trimmer. This set provides a variety of screws and nuts which serve as fastening components within the string trimmer.The screw and nuts set in a string trimmer might have to be ordered as a complete replacement part if one or more screws or nuts in the string trimmer has been lost, misplaced, or damaged. If this occurs, the screw and nuts set should be ordered as a genuine OEM replacement part.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This screw and nuts set is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Troy-Bilt, Murray, Yard Machines, Bolens, and Yard Man.

The flexible lower drive shaft is for use specifically with select models of trimmers. The drive shaft is used to rotate the cutting head on the line trimmer. If the owner notices that their cutting head is not rotating properly, it could be due to an issue with the drive shaft. If it is not replaced, it could reduce the effectiveness of the trimmer.Although the flexible lower drive shaft is made from high-quality materials, owners might find a need to replace it. It could become damaged due to wear and tear, for example. Owners should be sure to wear gloves to keep their hands safe during the replacement.The trimmer flexible lower drive shaft can work with certain machines from Craftsman and MTD. This is a genuine OEM replacement part that has been sourced from the manufacturer. It is sold individually.

This replacement part is a gearbox intended for use in grass trimmers. This is a genuine replacement part made by MTD. Gearboxes connect the main handle of the appliance to the rotating blade attachment. It is important that this part is secure as the blade cutter can be dangerous if loose.A new gearbox might be needed if the current one is broken or damaged in any way. It is not unusual for this part to require replacement after years of normal use as it's easy for the gearbox to become stripped down. Be sure the appliance is completely powered down and cooled off before attempting to replace this part. For more detailed instructions on how to replace this specific part, please reference the user guide or manual for the appliance. This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with grass trimmers made by MTD.

This is a genuine replacement screw designed for use in select MTD engines on lawn and garden equipment. Specifically, this is an anti-rotation screw, which is used to stop the drive shaft housing from turning inside of the main housing assembly. This screw is a small part that is subject to constant vibrations, pressure, and high temperatures. It can sometimes become worn or damaged as a result or even break off entirely, which would mean that the inner housing would no longer be held in place accordingly. If this screw is damaged or lost, it needs to be replaced with a genuine OEM replacement as soon as possible. This MTD anti-rotation screw is manufactured with high-quality materials and designed for use in select trimmers from MTD, RYOBI, Yard-Man, Troy-Bilt, Murray, Cub Cadet, Yard Machines, and Bolens. This replacement will require a screwdriver. Simply remove the damaged screw, if it is not already missing, from the clutch cover assembly, and then install the new screw. It should only take a few minutes to perform the replacement. Be sure to wear gloves to protect the hands. This screw is sold individually and does not include any additional parts or hardware.

This replacement part is a screw, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by MTD. Screws are found in almost every different type of machinery and are essential to the overall performance of different devices. Screws are responsible for holding things in place and securing them tightly so that the machine can operate smoothly and efficiently. A new screw might be needed if the current one is damaged or missing. It is possible for screws to be stripped over time and can become stuck in place. In this case, pliers might be needed to remove the faulty screw. Otherwise, this repair should be fairly simple and only require a screwdriver. Be sure the machine is powered down before replacing this part. This specific screw is sold individually and is a genuine OEM replacement part. Be sure to purchase the correct amount as many devices require more than one.

This is a replacement trimmer head assembly. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part is intended to replace a broken, detached, or faulty trimmer head assembly on various trimmer models. The head of the trimmer is the part that rotates and cuts grass or weeds. The trimmer head must be functioning properly in order for the trimmer to work as intended. Trimmer heads are subject to significant wear and tear throughout the life of the equipment, particularly as they regularly come into contact with rough surfaces and debris. Due to this, they may require replacement in the normal lifespan of the equipment. It is always recommended that the appropriate safety precautions are adhered to when attempting to fix any power tools or machinery. Proper tools may be required to replace this part. For more accurate information on how and where to install this trimmer head assembly, reference the appropriate owner's manual and included diagrams.As an authentic replacement part, this trimmer head assembly is suitable for use on several different models of trimmers manufactured by MTD, Craftsman, and Cub Cadet. This is a genuine part made of high-quality, durable materials and is sold individually.

This bump knob is a genuine MTD part. It is a replacement part for various makes and models of trimmers and trimmer attachments. On these machines, the bump knob is located in the inside of the cutter head assembly. It is made from plastic.Although this part is made from durable plastic material, it can become worn out through normal wear and tear over time. Before making this replacement, be sure to take proper safety precautions, such as disconnecting the spark plug, emptying the fuel tank, and allowing the engine to cool completely. Also, always wear protective gloves. A screwdriver is required to make this repair.This bump knob is a genuine OEM part that is sourced directly from the manufacturer. It is black and weighs 0.24 pounds. It is sold individually. It is made to be compatible with equipment with small engines manufactured by Troy-Bilt and MTD.

Trimmers have a shield assembly that protects the user from flying debris while the trimmer string is in operation. If this assembly cracks or falls off, the trimmer should not be operated until a new on is installed. Over time, the sun's heat may cause the plastic to crack, ultimately leading to the shield falling off. Safety is an important factor when operating lawn and garden equipment. Routine inspections of all equipment will reveal if any of the safety components of the machines are broken or missing.This shield assembly is an authentic OEM replacement part sourced directly from the manufacturer. Before installing this part, make sure the spark plug is removed and wear safety gloves. After removing the damaged shield, this shield should be installed using the screws from the one taken off the trimmer. This shield assembly is a black molded plastic part that is sold individually. It does not come with screws. It is designed for use with trimmers manufactured by Troy-Bilt and Craftsman.