Troy-Bilt Edger Parts

This gasket is a genuine MTD part. It is an insulator gasket meant as a replacement part on tillers, string trimmers, leaf blowers, edgers, and cultivators. The insulator gasket seals the connection between the insulator and cylinder. This gasket is made of durable, heat-resistant plastic. To replace the insulator gasket, a pair of work gloves, wrench, and screwdrivers are necessary. This gasket is a genuine OEM part sourced directly from the manufacturer. It is sold individually. It is compatible with machines made by Craftsman, Cub Cadet, MTD Pro, Troy-Bilt, Yard Machines, and Yard-Man.

This is a genuine replacement oil plug that is found in certain trimmers, edgers, and blowers designed for outdoor use. The oil plug is used to seal and fill the oil in the engine. This part is a high-quality plastic piece that features threads for screwing it into place and an O-ring to create a strong seal to prevent leaks and ensure optimal engine pressure. The oil cap may become stripped or damaged over time, or the O-ring could become faulty. In either case, replacing the entire cap/plug is the easiest solution.This genuine OEM replacement oil plug is compatible with machines from Troy-Bilt, MTD, Yard-Man, Yard Machines, and Cub Cadet. The plug is sold individually and comes with the O-ring. There are no other parts or hardware included. No tools are required to replace this plug. Simply unscrew the old one and screw the new one into place once the O-ring has been put on the new plug. Wear gloves whenever engine work is being performed to ensure hand protection. The oil should be checked regularly in all machines, which is a good time to check the cap to ensure it isn't damaged or in need of replacement.

This short block assembly is a genuine MTD part, sold individually. This short block assembly can be used as a replacement part for an edger. The short block assembly comes with the short block as well as all of its necessary components and fasteners required to replace a damaged short block.If the engine is not starting, is hard starting, or is performing unevenly, the short block may need to be replaced. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This short block assembly is compatible with the following outdoor appliance brands: MTD and Craftsman.

Idler pulley for gas line trimmers and wheeled trimmers. Guides and tensions drive belts. Replace if worn, cracked, or causing belt misalignment.

This replacement part is a flywheel combo. This is a genuine replacement part made by MTD. This part is a flywheel connected to a pulley. The combination makes it an important part of many engines and is used to transfer forces to different objects so that the user may operate the machine properly during use. A new flywheel combo might be needed if the current one is no longer working. If the pulley area of this part has been stripped down due to friction, it would be a good idea to replace the flywheel combo. Be sure the engine is turned off before replacing this part to prevent injury during the repair. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.

Fastener screw for tillers and lawn equipment. Secures components together for stable operation. Replace if stripped, missing, or damaged during maintenance.

Rotating trimmer head for gas line trimmers and weed wackers. Replace when cracked, worn, or no longer spinning properly during operation.

Flange bearing for lawn tractors and snow blowers. Replace if you notice excessive noise, vibration, or rough wheel rotation. Verify fit with your model.

A ball bearing is a common type of rolling-element bearing. It will use balls to keep space between the bearing races and eliminate friction and contact between moving parts. Ball bearings used in lawn and garden equipment ensure that axial loads and radial loads are evenly supported and that there is only a limited amount of rotational friction on the component. It distributes weight evenly, but will undergo constant wear and tear from vibration, heat, and friction and will need replacement regularly. This ball bearing is a genuine OEM part suited to use in Craftsman, Cub Cadet, Ryobi, Troy-Bilt, MTD, Huskee, Yard Machines, Bolens, Mastercut, and Yard-Man equipment. It may be needed for repair work done on a lawnmower, snowblower, tiller, edger, or a log splitter.

Replace your worn, cracked, or broken lawn mower wheel assembly. This complete wheel and tire unit installs on the deck for smooth rolling and maneuverability.

The engine pulley is a wheel that guides or drives the belt or belts within the engine compartment. The pulley has groves to help keep the belt secured in place while it spins around the component. The engine pulley belts are typically composed of high-quality, heat-resistant metal materials to withstand high temperatures and long periods of use. At times, the engine pulley can wear out, break, or become otherwise ineffective at performing its function. When this happens, a replacement engine pulley is required.When trying to determine if the engine pulley is faulty, check for belts that continually need to be adjusted or tightened or a pulley that won't secure belts at all. Be sure to have the appropriate tools for the repair on hand. Wear gloves for protection and ensure the motor is completely cooled before starting.This is an engine pulley replacement part that is an authentic OEM piece. It is sourced from the manufacturer and sold as an individual unit. The engine pulley is compatible with various engines found in edgers, trimmers, and snow blowers made by MTD, Yard-Man, Troy-Bilt, Cub Cadet, and Yard Machine brands.

This drive pulley is a genuine MTD part, sold individually. This drive pulley can be used as a replacement part in a snowblower or an edger. This part is used in conjunction with the drive belt to move the appliance.The drive pulley in a snowblower or an edger might have to be ordered as a complete replacement part in a drive pulley that can no longer generate rotation in the wheels of the appliance. This could occur if the drive pulley has suffered damage from general wear and tear with long-term use or as the result of a collision with a hard object such as a rock or a curb.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This drive pulley is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Troy-Bilt, Yard Machines, Montgomery Wards, Yard Man, and MasterCut.

Engine pulley for gas line trimmers and wheeled trimmers. Mounts to engine shaft to drive belts. Replace if cracked, worn grooves, or missing.

This is a genuine adjustment lever assembly that is made for use in select models of edgers. The adjustment lever assembly is a durable metal part that is designed to help adjust the height of the unit. This part is used frequently and it can be subject to damage from repetitive motion or other impacts. It could also become dented or otherwise broken, necessitating a repair or replacement. Typically, this OEM adjustment lever assembly is going to resolve the issue by offering an exact replacement. It is compatible with machines from MTD, Troy-Bilt, Yard Man, and Cub Cadet and will have different applications depending on the appliance in question. Owners should refer to the parts diagram for exact placement when replacing this lever assembly. This part will require a screwdriver and a wrench set to replace. It will be important to disconnect the power and wear gloves in order to perform this repair. Always allow the unit to cool before performing any work, as well. This assembly is sold individually and does not include hardware or additional components.