Parts for Mtd 31699560: Troy-Built Engine (170-To) Parts

This replacement part is a push rod kit. This is a genuine replacement part made by MTD. This part is commonly found in certain types of lawn mowers and assists the user in maneuvering the machine in the desired direction.A new push rod kit might be needed if the current one is damaged in any way. This might include being bent, dented, cracked, or chipped. If this is the case, the rod might not be able to function properly and should be replaced so that the appliance can return to working order. Be sure the engine is powered down before attempting to replace or repair this part in any way. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.

The flywheel key keeps the engine flywheel and the crankshaft connected. In the event that the engine is forced to a sudden stop, the flywheel key could be sheared off, making it impossible for the engine to start back up again. Replacing the flywheel key is a part of routine maintenance for many modern engines, so it should be inspected and replaced as needed. This sturdy metal flywheel key is easy to install, but remember to choose the right torque setting when doing the replacement. Always disengage the spark plug and wear gloves when replacing engine parts. This genuine flywheel key is designed to be used in a number of lawn and garden equipment products from MTD, Troy-Bilt, Yard Machines, Cub Cadet, Yard-Man, Husky, and Bolens. It can be used as a replacement for many models of snowblowers, lawnmowers, and log splitters. Sold individually.

The ignition coil is a standard part of internal combustion engines on lawn and garden equipment. This coil consists of the ignition plug, plastic housing, and metal wires that include a flexible plastic casing. The coil is responsible for connecting the spark plug and transmitting the current that creates the spark that allows the engine to fire. This coil may develop wiring problems or the rubber and plastic parts may become worn and damaged over time. This will require a full replacement of the assembly. It is a good idea to inspect the coil when changing the spark plug as a part of routine maintenance, as well. This genuine OEM ignition coil is compatible with lawn and garden equipment from Troy-Bilt, MTD, Yard Machines, Yard Man, HUSKEE, and Cub Cadet. It can be used on more than 150 lawn and garden machines, including lawn mowers, log splitters, and chipper/shredder models. This coil assembly includes the ignition plug, metal wires encased in plastic, and a plastic housing. The hardware required to install this part is sold separately, as are all other components. Be sure to wear gloves and allow the engine to cool before working on the ignition or other components.

This replacement part air cleaner is an OEM part for use in small engines used in outdoor equipment, such as tillers and dethatchers. The air cleaner is responsible for ensuring that clean air is brought into the engine to provide optimal performance. It is a good idea to inspect the air cleaner assembly regularly to ensure that there is no damage or cracks that could allow dirt and debris to get into the engine. If there are any issues, get a replacement before operating the engine again. This will ensure that there is no additional dirt getting into the engine. The genuine OEM air cleaner is a quality item that comes from the manufacturer. It is sold individually. It can work with tillers and other machines from top brands like MTD, Craftsman, and Yard Machines.

Here is a replacement fuel tank for use with a range of different models of small engines. The fuel tank plays one of the most important roles in a machine with an internal combustion engine. The tank holds the gas, which flows through the fuel line, so the machine can operate. Although fuel tanks are durable and built to last, there could be any number of reasons that one may need to be replaced. On older machines, for example, the fuel tank could have become damaged or corroded. Even newer machines could have a faulty fuel tank that would need to have a replacement. If there is an issue with the tank, it is not a replacement that can wait. The tank could be leaking fuel, for example, which can be wasteful as well as dangerous. This genuine OEM replacement fuel tank is identical to the one that came with the machine. It is sold individually and does not include any of the hardware needed for replacement. It can work with dozens of models of tillers, log splitters, and other small engines. Compatible brands include Troy-Bilt, Cub Cadet, MTD, HUSKEE, MasterCut, and Yard Machines.

This recoil starter assembly is a genuine MTD part, sold individually. This recoil starter assembly can be used as a replacement part for a tiller. The recoil starter assembly comes with all of the necessary components and fasteners required to replace a recoil starter. The recoil starter is a crucial part of the pull-start mechanism of a tiller, by which the engine of the tiller is powered on when the operator engages the pull-start. Remember to wear work gloves as a safety precaution while repairing or replacing parts within an outdoor appliance. This is an OEM part sourced directly from the manufacturer. It is sold individually. This recoil starter assembly is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Yard Man, Yard Machines, and Huskee.

This is a genuine MTD fuel cap replacement made for use on select snowblowers. It features a molded gasket for secure sealing and less risk of losing parts. The fuel cap is responsible for securing the fuel in the fuel tank during operation so that it doesn't spill out. There is an air hole in the cap to prevent pressurization of the fuel, ensuring safe operation at all times. This cap is made of plastic and it can become cracked or stripped with regular use. If it is damaged, the fuel will not be secure and the machine will not be safe to use. That will require an immediate replacement. This OEM fuel cap is made to exact standards by MTD and is compatible with several models of snow blowers and snow throwers. It is also capable of fitting select models from Yard Machines, Troy-Bilt, Cub Cadet, Yard-Man, and Husky. It features an easy plastic grip and a seal to prevent spillage. It can be installed with no tools and is sold as an individual unit. It is easy to screw the new cap into place, but be sure to thread the screw properly to prevent accidental stripping or misthreading that can cause the cap to get stuck.

This replacement part is a stud assembly. This is a genuine replacement part made by MTD. This stud assembly is responsible for keeping the muffler in place and secure so that the lawn mower may operate smoothly and according to the user's preferences. A new stud assembly might be needed if the current one is misplaced or damaged. It is not unusual for the studs to become stripped over time and need to be replaced. If the muffler is no longer able to stay in place, it can be due to the studs and should be looked into. Be sure the engine is completely turned off before attempting to replace this part. This stud assembly is sold individually and is sourced directly from the manufacturer. This part is a genuine OEM replacement part to ensure proper fit and long-lasting use.

This is a small engine spark plug positioned in the engine cylinder head. It supplies the spark that will ignite the air-fuel mixture to enable an engine to produce power. This particular spark plug is designed with superior corrosion resistance and dependable performance. Small but mighty, this component allows for increased conductivity and heat control. If the spark plug is damaged or in poor condition, many problems may arise in equipment, including sudden stop while running, overheating, and excessive gas consumption. Replace the spark plug by disconnecting the spark plug wire first, then use a socket driver or wrench to remove the spark plug. Install the new spark plug by turning it by hand initially to avoid cross-threading. If it doesn't twist anymore, use a deep socket wrench or socket driver to tighten the plug until snug. The spark plug can also be used to tune up outdoor power equipment or improve a small engine. This part is recommended to be replaced once per season. This part works with lawn mowers, snowblowers, tillers, leaf blowers, log splitters, wood chippers, and others with small engines. It is compatible with brands such as Craftsman, Cub Cadet, Troy-Bilt, Murray, Yard Machines, MTD, Huskee, Bolens, Yard-Man, and MasterCut. This is a genuine OEM part directly from the manufacturer and is sold individually.

The purpose of the fuel nipple in a small engine is to clean the fuel before it reaches the carburetor. If the fuel is dirty, it could cause issues with the carburetor and other parts of the engine. If the engine misfires, has a fuel odor, leaks, or has problems with dirty fuel getting into the carburetor, it may be time to replace the fuel nipple. It is an easy replacement, but be sure to work in a well-ventilated area. Drain the fuel tank and disconnect the spark plug before beginning this repair. This OEM fuel nipple is a genuine part right from the manufacturer. This fuel nipple can work well for snowblowers, snow throwers, chippers, tillers, and log splitters. It is compatible with a range of models from brands like Craftsman, Yard Machines, Yard-Man, MTD, and Troy-Bilt.

This replacement part is a dipstick assembly. This is a genuine replacement part made by MTD. This part is commonly used in machines that are run by fuel. This part is able to measure the quantity of liquid in a space that is inaccessible due to the size of the opening. Dipsticks are able to provide the user with an accurate measure of the level of fuel in a tank. A new dipstick assembly might be needed if the user is unable to currently check the amount of fuel within a tank. If the dipstick has been misplaced or is damaged, it is possible that it needs to be replaced. Work gloves are recommended when replacing this part as it's likely that fuel can still be stuck to the previous part. This dipstick assembly is sold individually and is sourced directly from the manufacturer. This is a genuine OEM replacement part which ensures proper fit.

This replacement part is a dipstick assembly. This is a genuine replacement part made by MTD. This part is commonly used in machines that are run by fuel. This part is able to measure the quantity of liquid in a space that is inaccessible due to the size of the opening. Dipsticks are able to provide the user with an accurate measure of the level of fuel in a tank. A new dipstick assembly might be needed if the user is unable to currently check the amount of fuel within a tank. If the dipstick has been misplaced or is damaged, it is possible that it needs to be replaced. Work gloves are recommended when replacing this part as it's likely that fuel can still be stuck to the previous part. This dipstick assembly is sold individually and is sourced directly from the manufacturer. This is a genuine OEM replacement part which ensures proper fit.

This is a replacement carburetor assembly that is used on small engines found in many types of lawn and garden equipment. The carburetor is responsible for ensuring there is a proper fuel-air mix before the fuel is sent to the engine. This assembly is made from metal and features a plastic lever. The carburetors found in engines are durable, but this does not mean that they will not wear down over time. Eventually, they may need to be replaced. If they have become damaged and are no longer functioning properly, it could cause issues with the performance of the engine. They will need to be replaced. This genuine OEM replacement carburetor is sold individually. Buyers will need to purchase gaskets separately. The part works for wood chippers, tillers, leaf blowers, and other small engines. Brands with models compatible with the carburetor include Craftsman, Cub Cadet, Troy-Bilt, Yard Machines, MTD, Huskee, Yard-Man. When purchasing, buyers should make sure that this carburetor is correct for their make and model of engine.