Parts for Frigidaire DW2508A1: 05 - Tub And Frame Parts

Dissolves limescale, mineral deposits, and odor-causing residues from dishwasher tub and spray system. Use monthly to maintain peak cleaning performance.

A cage nut used to secure panels, brackets, or components where a captive threaded fastener is needed. Replaces worn or missing clip nuts to restore a solid attachment and prevent loose or rattling parts. What it does

• Provides a captive, threaded anchor for screws in thin sheet metal or slot-style mounting points.
• Holds control panels, trim pieces, or internal brackets firmly in place.
• Helps stop vibrating, rattling, or shifting caused by a missing or damaged nut.
• Allows screws to thread in securely where a weld nut or tapped hole isn't available.

• Always unplug or disconnect power before working on the appliance.
• Access the mounting area and remove any trim or panels blocking the slot or opening.
• Snap the cage nut into the slot or over the edge until it engages; then thread the screw in carefully.

The door strike secures the dishwasher door in the closed position and activates safety switches during operation. Located on the dishwasher frame where the door latch engages, replace it if the door won't stay closed, won't latch properly, or the unit won't start despite being closed.

Machine screw secures panels, brackets, and internal components in washers. Replace missing, rusted, or stripped screws to restore proper fit and alignment.

Dishwasher fastening clip secures internal components like racks and panels. Replace if broken, loose, or missing to restore proper fitment. Verify compatibility with your model number before ordering.

Replacement dishrack roller for dishwashers. Attaches to the sides of the rack to allow smooth gliding movement. Replace when cracked, broken, or worn.

This is a mounting screw used to secure panels, brackets, or other components inside or on the exterior of a freezer. It ensures parts remain firmly attached during normal operation. Replace this screw if it is stripped, corroded, or missing, which can cause loose or rattling components.

Float mounting screw for dishwashers. Secures the float assembly to the base. Replace if stripped, corroded, or missing to restore proper float installation.

This replacement door gasket creates a tight seal around the refrigerator door to help maintain proper cooling and reduce energy waste. It restores the door's sealing surface for more consistent temperatures and less moisture buildup. What it does:

• Seals the door perimeter to keep cold air in and warm air out
• Helps prevent frost and ice buildup inside the compartment
• Reduces excessive run time from the compressor caused by air leaks
• Minimizes condensation and food spoilage linked to poor door sealing

• Disconnect power to the appliance before starting any work
• Remove the old gasket and clean the gasket channel and mounting surface
• Align and seat the new gasket evenly around the door; start at corners for best fit
• After installation, allow the gasket to set and check for gaps; adjust as needed

Black

Replace your dishwasher's O-ring seal to stop leaks and maintain proper water pressure. This wear part prevents water damage when worn or cracked.

Dissolves limescale, mineral deposits, and odor-causing residues from dishwasher tub and spray system. Use monthly to maintain peak cleaning performance.

Fix a dishwasher that won't stop filling or overflows with this float switch. Controls water level to prevent flooding. Simple DIY repair in 30 minutes.

Replacement drain hose for your dishwasher. Connects the pump to the drain system. Replace if cracked, kinked, leaking, or damaged to restore proper drainage.

Replaces missing, torn, or saturated sound-dampening insulation blanket for dishwashers. Wraps around tub to reduce noise and protect cabinetry.

This part has been discontinued by the manufacturer and is no longer available.

This is a flexible drain hose used in certain cooking appliances to route water or condensation away from the unit. It connects between the internal drain outlet and the external drain point. Replace this hose if you notice leaking, cracking, kinking, or if water is not draining properly from the appliance.

Replacement drain hose for your dishwasher. Connects the pump to the drain system. Replace if cracked, kinked, leaking, or damaged to restore proper drainage.

Replaces missing, torn, or saturated sound-dampening insulation blanket for dishwashers. Wraps around tub to reduce noise and protect cabinetry.

This side mounting bracket kit includes the hardware needed to secure a dishwasher to the adjacent cabinetry from the sides rather than from the countertop. It is commonly used in kitchens with granite, stone, or other countertops where top-mounting screws cannot be used. Replace this kit if the original brackets are bent, broken, or missing, causing the dishwasher to shift or slide during operation.

Dissolves limescale, mineral deposits, and odor-causing residues from dishwasher tub and spray system. Use monthly to maintain peak cleaning performance.