Parts for Craftsman 316791650: Tubes / Impeller / Engine Cover Parts

This replacement part is an upper tube. This part is commonly found in leaf blowers and allows the user to direct leaves in the proper direction according to the airflow. The upper tube could be cracked, dented, or punctured by impact. Additionally, if the tube has been clogged and cannot be cleaned, it should also be replaced. Be sure the engine is completely turned off and cooled down before attempting to replace this part to prevent injuries. This is a genuine OEM replacement part manufactured by MTD. This part is sold individually.

The On/Off Switch is an OEM part for MTD outdoor power equipment. This switch is a crucial component for the safe operation of various types of lawn and garden equipment, including lawn mowers, snow blowers, and other powered tools. 

Causes of damage to the On/Off Switch often involve wear and tear from regular use, exposure to harsh outdoor conditions that can corrode or damage electrical components, or accidental impacts that can physically damage the switch.

Symptoms of a bad On/Off Switch include:

• The equipment failing to start
• The machine not stopping when the switch is turned to the off position
• Intermittent power or erratic starting and stopping

This OEM replacement part can be used on trimmers from Craftsman, Yard-Man, Cub Cadet, Bolens, Ryobi, Huskee, Troy-Bilt, MTD, Murray, and Yard Machines.

This part is a replacement screw. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can be used to replace a stripped or misplaced screw in a variety of outdoor power equipment. This screw is a genuine piece of standard hardware that can have many potential uses. It's important to use screws sourced from the manufacturer to ensure a proper fit and high quality. Screws are essential for securing parts and holding the equipment together and should be replaced if worn, broken, or lost. It is always recommended that the appropriate safety precautions are adhered to when attempting to fix any power tools or machinery. When working on or near an engine, ensure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this screw, the appropriate owner's manual and included diagrams should be referenced.As an authentic replacement part, this screw is suitable for use on several different models of blowers, edgers, and trimmers manufactured by MTD, Ryobi, Yard Man, Cub Cadet, and Troy-Bilt. This is a genuine part made of high-quality, durable metal and is sold individually.

The air filter sifts out particles and debris as air enters the engine of the mower. In small equipment engines, air filters can help provide optimal performance of the engine. The filter is made of durable foam and is rectangular in shape and is sold as a single unit. Over time, they can become clogged with debris and particles and may require replacement as a part of regular maintenance. This MTD air filter replacement will keep equipment running better and releasing fewer emissions. Before installing, soak the filter in oil and then remove the excess. The oil will help catch more debris than a dry filter would and provide more protection for the engine. This filter is made to exact OEM standards and is designed for use on select gas-powered blowers and trimmers made by MTD, Troy-Bilt, and Cub Cadet.

The leaf blower starter adapter will work with many blower models. The part will connect the speed star accessory to start the engine. When the starter motor spins, it turns the shaft on the starter adapter. Inside the adapter, the shaft is connected to a coil spring. When the starter is spinning, the spring grabs the driveshaft and cranks the engine. If the starter adapter is not working properly, the engine may not start.The starter adapter is made of metal and is durable. However, it could become damaged from an accident, such as being dropped. There is also the chance that it could wear down or corrode over time. When it is not working correctly, owners will need to replace it. They should make sure to remove the spark plug before starting to work in the blower.This leaf blower starter adapter is compatible with some models from Troy-Bilt, Craftsman, Remington, MTD, and Yard-Man. It is sold individually and is an authentic OEM replacement part sourced from the manufacturer.

This flat washer is a genuine MTD part, sold individually. This flat washer can be used as a replacement part in a leaf blower.The flat washer in a leaf blower might need to be replaced if the component is lost, misplaced, or damaged. The flat washer can loosen and fall off during the typical operation of a leaf blower, in which case it should be replaced with this genuine OEM replacement part. Additionally, the flat washer could suffer damage in the form of general wear and tear over time, in which case it should also be replaced by this genuine OEM replacement part.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This flat washer is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Troy-Bilt, and Yard Man.

This impeller can be used as a replacement part for the small engine of a leaf blower or a leaf vacuum. The function of an impeller, which operates by rotation, is to take in the leaves and eject them out of the chute.An impeller might have to be replaced if it suffers damage that impedes it from properly ejecting the leaves from the chute. A common symptom of an impeller that needs to be replaced is that the leaves are not ejected with enough force from the chute or that the ejection process stalls or does not occur at all. If this is the case, the impeller should be removed and replaced with this genuine OEM replacement part immediately before using the leaf blower or leaf vacuum again. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer, MTD, and it is sold individually. This impeller is compatible with the following brands: MTD, Troy-Bilt, and Yard Man.

This replacement screw is useful for many different types of handheld outdoor equipment. Screws are used as a means to hold parts of the machine together. The screws also help to reduce the amount of vibration that occurs in the machine.These screws are used in outdoor equipment, so there is a chance they could corrode over time. In some cases, the screws may also lose their thread, or the heads of the screws could start to become worn down. Owners who notice issues with the screws, or who notice a missing screw should replace them to ensure the proper function of the machine. Failure to replace damaged screws could result in more difficulty replacing them after they wear down further.The screw works on various types of equipment including blowers and trimmers. It is compatible with a range of brands including Murray, Craftsman, Yard Machines, Bolens, Yard-Man, Craftsman, Ryobi, and McCulloch. This is a genuine OEM part sourced from the manufacturer, and it is sold individually.

Gas-operated blowers have a primer bulb that is used to send a mixture of gas and air to the carburetor to start the engine. This primer bulb is attached to the blower with a primer bracket. If this bracket becomes damaged or loose and falls off the blower, the primer bulb will not be secure and could become damaged. It is essential to perform routine inspections on outdoor equipment to check component connections. If the primer bracket is found to be loose or in disrepair, it should be removed and replaced.To replace the primer bracket, look at the primer bulb from the back and locate the screws holding it onto the bracket. Loosen the screws to remove the primer bulb from the bracket. Remove the screws holding the bracket to the blower and take the bracket off the blower. Install the new bracket and tighten the screws. Reattach the primer bulb to the bracket. This primer bracket is a metal part that is sold individually. It is a genuine OEM part sourced directly from the manufacturer for use in gas blowers manufactured by MTD and Troy Bilt. This part does not come with hardware.

This starter housing assembly is a genuine MTD part, sold individually. This starter housing assembly can be used as a replacement part in a lawn mower. The purpose of the starter housing assembly in a lawn mower is to provide cover and protection for the starter motor of the appliance.The starter housing assembly could be damaged from general wear and tear over long-term usage or as the result of a direct impact collision with a hard object. If the starter housing assembly is leaving the internal mechanisms of the exposed to potential damage, the starter housing assembly should be removed and replaced by this genuine OEM replacement part. It is a simple replacement process that will only take a few minutes to conduct.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. It is sold individually. This starter housing assembly is compatible with the following outdoor appliance brands: MTD and Craftsman.