Turf Pro Parts

This is a thrust bearing. The thrust bearing is positioned between the lawn mower's spindle and front axle and serves to reduce friction during use. This part makes shifting between different speeds much easier. A worn-out thrust bearing will have more room between the rollers on the outside of the bearing. This movement will cause the bearing to move more than usual. When the bearing goes bad, the driver may notice rattling, squeaking, or other noises coming from the machine. These noises can be more prevalent when the clutch pedal is engaged. To replace the thrust bearing, first, the clutch must be removed from the lawn mower. On the bottom of the driveshaft, there is a bolt and washer that need to be removed. Wedge and move the clutch, allowing it to work its way down the driveshaft, then remove it. There is a bearing retainer clip and three bolts that will enable the thrust bearing to be removed. Repeat the steps in reverse after installing the new component.This product is a genuine OEM MTD part sourced directly from the manufacturer. The part is sold individually and not available with any other components. This product is compatible with MTD and Cub Cadet products.

This replacement part is a tiller flap intended for use on lawn mowers. It protects the user and equipment from flying debris that might cause harm during use.A new tiller flap might be needed if the current one is missing or damaged at all. This can include the part being torn, bent, or cracked in any way. This part can be damaged after years of normal wear and tear and should be replaced if this is the case. Be sure the engine is powered off before attempting to replace or repair this part. This is a genuine OEM replacement part manufactured by MTD. This part is sold individually.

This part is a replacement steering drag link. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can be used to replace a broken or defective steering drag link on lawn tractors. The steering drag link is a critical component of the lawn tractor steering system. It works to convert the rotary motion generated by the crank arm to the wheels of the tractor. This enables the user to properly maneuver the equipment. If this part is bent, dented, or damaged, proper steering may be difficult or impossible. It's advisable to wear work gloves to protect the hands. It's important when working on or near an engine to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this steering drag link, the appropriate owner's manual and equipment diagrams should be utilized.As an authentic replacement part, this steering drag link is suitable for use on several different models of lawn tractors manufactured by MTD, Yard Machines, Bolens, Ryobi, and Troy-Bilt. Please note that this is a genuine part made of high-quality, durable metal and is sold individually.

This part is a replacement gas gauge. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. If the current gas gauge is broken or in any way damaged, this part can be used as a replacement. It is intended for use with several lawn tractor models.The gas gauge both measures the amount of fuel residing in the tank and seals the fill spout of the fuel tank. This ensures that no dirt, debris, or contaminants can enter the tank and pollute the fuel supply. It also prevents fuel from spilling out. When working on or near an engine, always ensure that the equipment is powered off and completely cooled down before attempting to undergo any repairs. For more accurate information on how and where to install this gas gauge, the appropriate owner's manual and equipment diagrams should be referred to. This gas gauge is suitable for use on a variety of lawn tractor models manufactured by MTD, Troy-Bilt, Yard Man, Bolens, Cub Cadet, Husky, and Yard Machines. It is a genuine OEM part and thus is made of high-quality, durable materials. This part is sold individually.

This is a genuine OEM chute deflector that is made for use with select lawn mowers and tractors. The chute deflector plays an integral part in keeping the machine running and keeping the user safe. It is designed to deflect the grass clippings and any debris out and away from the blades and the engine of the unit while ensuring that they do not fly back and hit the operator. Although it is made of durable plastic, the chute deflector is known to become damaged over the lifetime of the use of the mower unit. The screws that attach it to the deck could become lost or damaged, which could lead to the chute becoming damaged, as well. It could also be damaged by hitting a stump or rock. In any case, the deflector will need to be replaced before the unit can be safely operated. This genuine OEM replacement will do the job, and is designed to exact standards by MTD. It can also be used with select units from Cub Cadet, Troy-Bilt, and others. It is sold individually and the screws required to attach the chute will require an additional purchase.

This bowed washer is a genuine MTD part, sold individually. This bowed washer can be used as a replacement part in a lawn mower. The purpose of the bowed washer in a lawn mower is to serve as a component within the general fastening mechanisms of the lawn mower so that friction can be reduced between two or more components and spacing is created between the components.The bowed washer in a lawn mower might have to be completely replaced at one or more points within the typical lifespan of the lawn mower; this could occur if the bowed washer is damaged from general wear and tear with long-term use or has been lost or misplaced. If the bowed washer has been stripped away or has fallen out of its place and cannot be found, the bowed washer should be replaced by this genuine OEM replacement part in order to guarantee safe use of the appliance.This is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This bowed washer is compatible with the following outdoor appliance brands: MTD, Cub Cadet, and Craftsman.

This replacement part is a casing clamp. It is a genuine replacement part made by MTD. This part is typically used to secure the governor control plate to the tank assembly.A new casing clamp might be needed if the current one is damaged or missing. Be sure the machine is stationary and the engine is completely powered down before beginning this repair. This part is made of durable metal so that it works properly with the machine at hand. Refer to the owner's guide for more information on this part. This air cleaner is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer to ensure a proper fit.