Parts for Whirlpool GMH6185XVS3: 05 - Turntable Parts

This support secures and stabilizes a mating component inside your appliance, helping restore proper alignment and fit. Replace a damaged or missing support to stop wobble, sagging, or misalignment.

• Provides structural backing to keep the attached part level and in place
• Helps eliminate rattling, shifting, or uneven gaps
• Replace if cracked, deformed, or missing
• Symptoms can include loose or sagging parts, poor alignment, or difficulty reinstalling shelves/panels

• Disconnect power (and shut off water, if applicable) before service
• Remove the affected shelf/drawer/panel to access the support
• Transfer and reuse any model-specific fasteners or clips
• Seat the new support fully and check alignment before reassembly

This replacement cookware piece restores a missing or damaged pot or pan used with compatible Whirlpool cooking appliances, letting you safely resume everyday stovetop cooking with a correct-fit, OEM-style component. What it does:

• Replaces worn, damaged, or missing cookware used on compatible Whirlpool ranges or cooktops
• Provides a usable cooking surface for boiling, simmering, frying, and other stovetop tasks
• Helps eliminate symptoms like unusable or unstable cookware, excessive warping, or compromised nonstick surfaces
• Matches OEM form and function so controls and heat sources work as intended

• Only install when the appliance and cooktop are cool and power is disconnected
• Verify the part number and fit against your appliance before installation
• Follow the appliance owner's manual and OEM instructions for placement and use
• Do not use cookware with damaged bottoms or compromised nonstick surfaces; discard if safety is in question

*** Note: This glass tray has 3 triangles to engage the coupler. In some cases, the factory used a tray that has 3 partial-circles. For that glass tray use part# 4393799. ***

The Glass Tray is an OEM part for Whirlpool built-in microwaves. This heat-resistant glass plate helps distribute incoming microwave energy evenly throughout cooking cycles. 

Causes include normal thermal stress cracks from rapidly changing microwave temperatures daily. Accidental impact damage is also possible if rack assemblies are mishandled.

Symptoms of a problematic glass tray include:

• Inconsistent or inadequate microwaving of certain foods
• Hotter or cooler areas noticed depending on placement
• Visible corrosion, cracks or pitting of the tray surface over time
• Sparking, arcing or strange noises from inside the microwave cavity

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Turntable support ring for the microwave glass tray. This ring sits under the plate and rides on built-in rollers, restoring smooth, even rotation for consistent heating and helping eliminate scraping noises or a wobbling turntable.

• Supports and guides the glass turntable as it rotates around the center drive
• Promotes smooth rotation for more uniform cooking
• Common symptoms: plate won't turn, jerky movement, scraping/grinding noise, or a wobbling tray
• Replace if cracked, warped, or if the rollers are worn/damaged

• Disconnect power to the microwave before servicing
• Remove the glass tray; lift out the old ring and clean the turntable track
• Position the new ring with rollers facing down so it sits flat around the drive coupler
• Reinstall the tray and test using a microwave-safe cup of water

The Microwave Coupler is an OEM part for Whirlpool microwaves. This component connects the microwave’s turntable motor to the turntable tray, allowing the tray to rotate and ensure even cooking of food. The coupler is a small but vital part that ensures the proper movement of the turntable, contributing to the microwave's overall efficiency.

Causes of a bad coupler can include wear and tear from regular use, accidental damage from heavy items placed on the turntable, or misalignment issues. A malfunctioning coupler can lead to uneven cooking and potential damage to the microwave’s internal components.

Symptoms of a bad microwave coupler include:

• The turntable not rotating
• Uneven cooking or heating of food
• Grinding or clicking noises during operation
• The turntable tray wobbling or not staying in place

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Motor-Turn is an OEM part compatible with Whirlpool microwaves. Located inside the microwave cavity on the turntable mechanism, the motor-turn contains the turntable motor and drive components. 

Causes of a bad motor-turn can include a faulty motor, worn gears or pulleys, or broken turntable shaft. 

Symptoms of a bad motor-turn include:

• The turntable not rotating or rotating unevenly
• Loud grinding noises emanating from inside the cavity
• Burning or uneven cooking of foods
• Traces of sparks near the turntable mechanism

This OEM Whirlpool replacement motor-turn assembly is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore microwaves. 

Restore your microwave's two-level cooking capability. This removable meal rack sits above the turntable to support a second layer of dishes during approved modes, replacing a lost or damaged rack so food heats and circulates as intended.

• Creates a second level for multi-item cooking when your model supports rack use
• Positions food for proper airflow during convection, grill, or combination cycles
• Direct replacement for an original rack that is missing, bent, or corroded
• Addresses wobbling or arcing that can occur with a damaged or improperly positioned rack

• Use only in models designed for a rack; your owner's manual for approved modes and placement
• Set the rack on the designated supports and ensure it does not contact the cavity walls
• Remove the rack for standard microwave-only cycles if your manual instructs
• Allow the oven to cool before handling the rack

The Motor Spacer is an OEM part for Whirlpool microwaves. It is designed to support and position the turntable motor, ensuring it stays aligned and functions correctly. This spacer helps maintain the stability of the turntable, allowing even and consistent heating of food.

Causes of a bad motor spacer can include wear and tear over time, physical damage from heavy use, or misalignment due to accidental impacts. Regular inspection and maintenance can help identify issues before they lead to motor malfunction.

Symptoms of a bad motor spacer include:

• The turntable not rotating properly
• Unusual noises coming from the turntable area
• Inconsistent heating or cooking of food
• The turntable being unsteady or wobbling

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Replace a damaged rack to restore safe, stable support and smooth sliding in the appliance. A new rack brings back full capacity and dependable performance when the original is bent, rusted, or missing.

• Provides a sturdy, level surface to hold items securely during operation
• Slides on existing rails for easy loading and unloading
• Replaces racks that are bent, broken, rusting, or missing
• Helps prevent items from tipping, rattling, or shifting

• Disconnect power and allow any hot surfaces to cool before servicing
• Pull the old rack straight out; retain and transfer any reusable hardware if required
• Align the new rack with the rails and slide it in until fully seated
• Verify smooth travel and proper fit before returning the appliance to service