Parts for Kitchenaid KRFC704FSS03: Unit Parts

A replacement machine screw with 8-32 threads used to secure panels and components on compatible Whirlpool appliances. Installs quickly to restore proper fit and stop rattling or loose parts. What it does:

• Secures panels, trim, brackets or components that use 8-32 machine-thread fasteners
• Restores proper alignment and prevents vibration-related noise
• Replaces missing, stripped, or damaged screws that allow parts to come loose
• Works where a standard 8-32 machine screw is specified by the manufacturer

• Disconnect power and/or gas before servicing the appliance to reduce shock or injury risk
• Use the proper screwdriver or nut driver for the screw head to avoid stripping
• Thread gently and stop when snug; do not overtighten to prevent stripping or damage
• If threads are damaged, replace with the correct-size screw rather than forcing it

This replacement extension secures and supports a factory component to restore proper fit and reduce movement. Use it to replace a worn or damaged extension that causes misalignment or loose panels. What it does

• Provides a mounting/extension point to hold adjacent panels or components in place
• Restores proper alignment to reduce gaps, rattles, or loose-feeling parts
• Replaces worn, cracked, or broken extensions that no longer secure components
• Helps maintain original fit and function after impact or wear

• One extension assembly

• Disconnect power to the appliance before starting any repair to avoid shock or injury
• Installation typically requires basic hand tools; access steps
• Handle plastic parts carefully to avoid cracking; do not force parts into place

This genuine replacement clip secures small appliance components in place to prevent rattling and part separation. It restores proper alignment so panels, trim, or internal assemblies stay firmly fastened during normal use. What it does:

• Fastens and retains panels, trim, or small assemblies to the appliance frame
• Prevents parts from shifting, vibrating, or causing operational noise
• Helps maintain proper alignment of connected components
• Commonly replaced when clip is cracked, missing, or no longer holds

• One replacement clip

• Disconnect power (and gas if applicable) before servicing the appliance
• Use needle-nose pliers or a flat tool to remove and install the clip; avoid excessive force
• The clip seats fully in its mounting slots and secures the mating part

The Control Board is an OEM component specifically designed for Whirlpool refrigerators. This board houses the electronic components that control temperature functions, sensors, lighting operations, and diagnostic readouts for the refrigerator compartment. 

Symptoms of a bad control board can include the inability to maintain set temperatures, error codes appearing frequently, and lack of responsiveness from interior lighting or temperature controls.

Causes of failure in the control board may involve component degradation over extended use, exposure to moisture or dust inside the refrigeration system, or damage from power surges.

 Causes of a bad control board include:

• Interior lights not illuminating properly   
• Faulty temperature or sensor readings
• Refrigerator failing to cool or maintain temperatures
• Error codes appearing continuously on displays

It is also suitable for replacing boards on KitchenAid, Jenn-Air, Amana, Magic Chef and select Kenmore brand refrigerators.

The Grommet is an OEM part for Whirlpool side-by-side refrigerator models. It is a sealing component located where accessory lines like the water line and defrost heater enter the refrigerator cabinet.  

Causes of a bad grommet include cracking, tears or splits that interfere with an airtight connection. Regular wear and repeated expansion/contraction can deteriorate grommet integrity over time.

Symptoms of a bad grommet are:  

• Excessive interior fogging or moisture issues  
• Unexplained fridges or warm spots inside compartments
• Higher energy bills from compromised insulation levels
• Dust or dirt tracked into the food storage areas

This OEM grommet fits Whirlpool models as well as those by Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore.

Replacement screw that secures panels, brackets, and other components inside your appliance, keeping assemblies tight and aligned. Replace missing or stripped hardware to eliminate looseness, reduce vibration, and restore a solid, factory-fit hold.

• Fastens panels, brackets, trim, or internal components
• Helps maintain alignment and reduce rattling/vibration
• Replaces missing, loose, rusted, or stripped hardware
• Common signs: stripped head/threads, loose panel, buzzing/rattling noises

• Disconnect power before service; shut off gas/water if applicable
• Match to the original screw; start threading by hand to avoid cross-threading
• Use the correct driver size to prevent stripping
• Tighten snugly; do not overtighten. If it won't hold, inspect the receiving hole/clip

This EMI filter reduces electrical interference on the appliance power line to help prevent noise and spurious signals that can affect operation and nearby electronics. It restores proper line filtering for safer, quieter performance. What it does:

• Filters high-frequency electromagnetic interference (EMI/RFI) from the incoming AC line
• Helps prevent stray electrical noise that can cause electronic control glitches or erratic behavior
• Supports stable operation of control boards by improving incoming power quality

• One EMI filter (single unit)

• Disconnect power at the breaker or unplug the appliance before accessing electrical components
• Mount and wire using existing chassis locations and connectors; match original wiring and polarity
• Inspect wiring and grounds for damage; replace damaged wiring

This terminal block cover protects the appliance's power connection area and helps prevent accidental contact with live terminals. It keeps wiring organized and shielded for safer operation. What it does

• Shields the appliance's power terminal block from accidental contact and debris
• Helps keep terminal connections secure and wiring routed neatly
• Reduces risk of shorting at the power connection area
• Commonly replaced when the original cover is cracked, broken, or missing

• Disconnect power to the appliance before attempting any service
• Remove access panels as needed to reach the terminal block, then snap or screw the cover into place per the appliance's wiring layout
• If terminals or wires are damaged, replace or repair connectors before installing the cover

This insul-sound deadening pad reduces vibration and noise by dampening panels and components in laundry and kitchen appliances. It's a small adhesive-backed sound/isolation pad used where noise or rattles transfer through metal surfaces. What it does

• Dampens rattles and reduces structure-borne noise from panels, cabinets and housings.
• Helps isolate vibrating components from appliance chassis to lower perceived sound.
• Commonly applied behind control panels, cabinet walls or on motor mounts to cut vibration transmission.
• Useful when worn, detached or hardened factory pads allow increased noise.

• One insul-sound deadening pad

• Disconnect power before servicing an appliance to avoid shock or injury.
• Clean and dry mounting surface; press pad firmly to ensure adhesive contact.
• Replace only in the original location; do not cover vents or moving parts.
• If adhesive is weak, use OEM-approved adhesive; avoid solvents that may damage finishes.

This Drier Tube is an OEM part for Whirlpool Refrigerators. It plays a role in filtering and drying the refrigerant. Wear, leaks, or clogs can cause issues with this part.

What Causes a Bad Refrigerator Drier Tube:
Wear, leaks, or clogs within the tube can affect the refrigeration process or cause leaks.

Symptoms of a Bad Refrigerator Drier Tube:

• Insufficient cooling or freezing
• Refrigerant leaks or hissing sounds
• Excessive moisture around the tube area

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models. 

This sealed refrigerator compressor circulates refrigerant through the cooling system to maintain proper temperatures. Replacing a failing compressor restores cooling performance and reduces temperature fluctuations in the fresh food and freezer compartments. What it does:

• Compresses and circulates refrigerant to enable the fridge's cooling cycle.
• Restores proper cooling when the compressor is failing or not running.
• Helps stop symptoms like warm interior temperatures, excessive run time, or frequently cycling.
• Works as the sealed-system heart of the refrigerator; often replaced with other sealed-system components when diagnosed.

• Sealed-system work usually requires specialized tools — do not attempt on your own.
• Disconnect power before servicing to avoid electrical shock.
• Replacement may require evacuating/recharging refrigerant and replacing mounting grommets, lines, or service valves as needed.

The Fan Motor is an OEM replacement part for Whirlpool refrigerators. It is designed to provide cooling and ventilation to the condenser coils near the compressor, helping to dissipate heat and maintain the set temperature inside the refrigerator.

A bad condenser fan motor assembly can occur due to wear and tear, electrical issues, or damage to the motor or fan blades. If you notice symptoms such as the refrigerator not cooling properly, excessive heat near the compressor, or unusual noises coming from the back of the refrigerator, it may indicate a faulty condenser fan motor assembly.

Symptoms of a bad condenser fan motor assembly include:

• Refrigerator not cooling properly
• Excessive heat near the compressor
• Unusual noises coming from the back of the refrigerator

Restore your refrigerator by replacing the faulty or damaged condenser fan motor assembly with this genuine OEM part.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.