Parts for Frigidaire MRT18DNBD0: 02 - Door Parts

The Refrigerator Door Gasket is an OEM part for Frigidaire refrigerators. It provides a tight seal around the refrigerator door, ensuring that cold air stays inside and warm air stays out, maintaining optimal temperatures for food preservation. The gasket measures approximately 29-1/2" wide x 44" long. 

Causes of a bad door gasket can include wear and tear over time, damage from frequent opening and closing of the door, or improper cleaning that leads to cracks or tears. A compromised gasket can lead to energy inefficiency and affect the refrigerator's performance.

Symptoms of a bad door gasket include:

• Noticeable gaps between the door and the refrigerator
• Increased energy consumption
• Frost buildup around the door seal
• Difficulty in closing the refrigerator door properly

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This inner door panel is the refrigerator's interior liner that restores a clean, sealed surface inside the door and provides mounting locations for bins and hardware. It helps keep cold air inside and supports door components. What it does:

• Replaces a cracked, warped, or damaged interior door liner that can let out cold air or collect moisture
• Restores bin and shelf mounting points so door storage items sit securely
• Improves interior appearance by covering damage or heavy wear
• Helps reduce drafts and cold-loss caused by a compromised door interior

• Disconnect power to the refrigerator before starting and work on a cool, empty door
• Installation typically requires removing the door trim and existing liner; basic hand tools recommended
• Retain and reuse any clips, screws, or gaskets unless replacements are provided separately
• If bins, seals, or hardware are attached to the old liner, transfer them carefully to the new panel

The Door Shelf Bar is an OEM part for Frigidaire refrigerators. It is designed to secure items on the refrigerator door, providing additional storage space and helping to keep items organized and easily accessible. The sturdy construction ensures that it can hold bottles, jars, and other items securely. It measures approximately 31 inches in length. 

You should replace the door shelf bar if it becomes damaged or worn out. Common causes include regular use, accidental impacts, or the weight of heavy items over time, which can cause the bar to crack or break.

Symptoms of a bad door shelf bar include:

• Items falling from the door shelf
• Visible cracks or breaks in the bar
• Difficulty keeping items securely in place
• The bar not fitting properly or staying attached

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

Color: white. Measures about 2 inches high by 1-1/2 inches deep.

The Right Hand Door Shelf Support is an OEM part for Frigidaire refrigerators. This support bracket holds the door shelf in place, providing stability and ensuring that items stored in the door compartment remain secure.

Causes of a bad door shelf support can include wear and tear from regular use, physical damage from overloading the shelf, or breakage due to impact when opening or closing the door. Over time, the plastic material can also become brittle and crack.

Symptoms of a bad door shelf support include:

• Door shelf sagging or detaching from the door
• Difficulty in securing items on the shelf
• Visible cracks or damage to the support bracket
• Items falling out when opening the door

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Door Shelf Support is an OEM part for Frigidaire refrigerators. This part supports the door shelf, providing a sturdy base to hold various items such as bottles, jars, and condiments securely in place on the refrigerator door.

Common causes of a bad door shelf support include regular wear and tear, overloading the shelf with heavy items, or accidental damage. 

Symptoms of a bad door shelf support include:

• The door shelf sagging or tilting
• Items falling off the shelf
• The shelf not staying securely in place
• Visible cracks or breakage in the support

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This door support bracket replaces a worn or damaged support that helps hold and align the appliance door. Restores proper door fit and reduces sagging so the door seals and operates more reliably. What it does:

• Provides stable support for the appliance door to prevent sagging and misalignment
• Helps maintain proper door gap so the door closes and seals correctly
• Replaces broken, bent, or worn support brackets that can cause uneven operation
• Reduces rattling or extra movement caused by a compromised support

• Disconnect power to the appliance before beginning any repair
• Basic hand tools are typically required; follow manufacturer instructions for access and removal
• Handle sharp edges carefully and support the door during removal/installation to avoid damage or injury

Left side door shelf support. Color: White. Measures about 1 3/4 inch x 1 3/4 inch. For the right hand side order 3206150.

The Door Shelf Support is an OEM part for Frigidaire refrigerators. This part holds and secures the door shelf in place, providing support for the items stored on the shelf. 

Causes of a bad door shelf support can include regular wear and tear, overloading the shelves, or physical damage from impacts. 

Symptoms of a bad door shelf support include:

• Shelves not staying in place or becoming loose
• Cracks or breaks in the support material
• Difficulty in securing the shelf to the door
• The shelf tilting or falling off the door

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

Note: In some applications, this door shelf bar requires you to cut the length to fit. Dimensions: Approximately 23.16" x 1.12"

The Door Shelf Bar is an OEM part for Frigidaire refrigerators. It is designed to secure items on the refrigerator door, providing additional storage space and helping to keep items organized and easily accessible. The sturdy construction ensures that it can hold bottles, jars, and other items securely. It measures approximately 31 inches in length. 

You should replace the door shelf bar if it becomes damaged or worn out. Common causes include regular use, accidental impacts, or the weight of heavy items over time, which can cause the bar to crack or break.

Symptoms of a bad door shelf bar include:

• Items falling from the door shelf
• Visible cracks or breaks in the bar
• Difficulty keeping items securely in place
• The bar not fitting properly or staying attached

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This part has been discontinued by the manufacturer and is no longer available.

This replacement egg tray restores organized egg storage in your refrigerator door or shelf area so eggs stay upright and easy to access. Durable molded plastic replaces cracked or missing trays to help keep eggs contained. What it does:

• Holds and secures eggs to prevent rolling and tipping
• Restores a missing or damaged egg storage area in the fridge
• Helps reduce mess from cracked or loose eggs
• Fits into the refrigerator door or designated shelf location

• Simply remove the old tray and snap the new tray into the existing mounting location
• No tools required for most installations; handle gently to avoid cracking the tray
• Clean with mild detergent before first use
• Keep away from high-heat sources and avoid harsh chemicals

Size: Approximate 2.5 inches thick, 33 inches wide and 70 inches long.