Parts for Kitchenaid KEBK276BBL00: 03 - Upper Oven Door Parts

The Oven Door Glass Spacer is an OEM part for Whirlpool ovens. This part helps maintain the structural integrity of the oven door, preventing heat escape, and ensuring the door glass remains securely in place during the oven's operation. 

Causes of a bad Oven Door Glass Spacer can range from wear and tear over time, leading to degradation or loss of the spacer, to improper installation that may cause the spacer to dislodge or fail to provide adequate support. 

Symptoms of a malfunctioning Oven Door Glass Spacer include:

• Loose or rattling oven door glass
• Uneven gaps around the door glass, indicating misalignment
• Heat leaking from around the oven door, potentially affecting cooking performance

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Screw is an OEM part for Whirlpool appliances. This specific screw is used in various locations within Whirlpool appliances, securing components and ensuring the stability and proper alignment of parts. It is designed to fit precisely and maintain a firm hold, contributing to the overall functionality and safety of the appliance.

Over time, screws can become worn or stripped due to regular use, corrosion, or over-tightening. 

Causes of a bad screw include wear and tear, exposure to moisture leading to rust, and over-tightening which can strip the threads.

Symptoms of a bad screw include:

• Loose or wobbly components
• Misalignment of parts
• Noise due to vibrating or loose parts
• Difficulty in securing or removing the screw

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Color: Black

Color: Stainless

This door hinge secures and pivots the refrigerator door so it opens and closes smoothly, restoring proper door alignment and seal for reliable cooling performance. What it does:

• Supports the refrigerator door and provides a smooth pivot point for opening and closing
• Helps maintain proper door alignment to ensure a tight seal and consistent internal temperature
• Can prevent or correct door sag, rubbing, or uneven gaps
• Reduces noise or sticking that occurs when the hinge is worn or damaged

• Disconnect power to the appliance before attempting repairs and work with the door supported to prevent dropping
• Use appropriate tools to remove and reinstall hinge fasteners; keep track of any washers or shims
• Verify door alignment and gasket seat after installation; adjust hinge position as needed before fully tightening
• If other hinge hardware is worn or damaged, replace those components to ensure proper function

A 27-inch replacement refrigerator door handle that restores a secure grip and fresh appearance. Designed to match factory fit and finish for a clean, usable door surface. What it does:

• Provides a sturdy handhold for opening and closing the refrigerator door
• Restores proper clearance and alignment when the original handle is cracked or broken
• Helps prevent sharp edges and reduces risk of cuts from damaged handles
• Improves the cabinet's appearance when the original handle is worn or faded

• One replacement 27-inch door handle

• Remove power to the appliance or open doors fully to prevent pinching during installation
• Use appropriate hand tools; avoid overtightening fasteners to prevent cracking
• Keep screws and small parts secure—inspect existing mounting points for damage before attaching

This replacement screw secures appliance components and panels. Replacing worn or missing hardware restores a tight, rattle-free fit and helps keep assemblies properly aligned for reliable performance.

• Fastens panels, brackets, or covers to the appliance frame or mating parts
• Helps maintain proper alignment and reduces vibration and noise
• Replaces missing, stripped, or corroded screws
• Common signs to replace: loose or rattling panels, misaligned parts, damaged screw head or threads

• Disconnect power; also shut off water or gas to the appliance if applicable
• Compare to the original to ensure thread and length match before installing
• Start threads by hand to avoid cross-threading; tighten only until snug
• If the mating clip/insert is stripped, replace that hardware as well

This is the heat-resistant glass panel on the cavity side of the oven door. Replacing a damaged pane restores a clear view into the oven and helps the door retain heat for consistent cooking. What it does:

• Serves as the inner door pane facing the oven cavity to contain heat
• Maintains a clear viewing window to monitor food during cooking
• Helps the door insulate properly for stable temperatures
• Replace if the glass is cracked, chipped, shattered, or missing

• One cavity glass panel

• Disconnect power at the breaker and allow the appliance to cool completely
• Remove the door and work on a padded surface; note the exact stack order of panes, gaskets, and trim
• Handle glass with cut-resistant gloves; edges can be sharp
• Do not overtighten fasteners when reassembling to avoid stressing the glass

A replacement bumper rail that cushions and stabilizes appliance doors and drawers to reduce noise and prevent metal-to-metal contact. Restores smoother closing and helps protect the appliance finish from wear. What it does:

• Cushions doors/drawers to reduce rattling, banging, and vibration
• Prevents contact between moving parts and cabinet edges that can cause chips or scratches
• Helps maintain alignment for smoother opening and closing
• Common symptom: noisy or misaligned door/drawer or visible wear at the contact point

• Disconnect power to the appliance before beginning any repair
• Remove the door, drawer, or trim to access the old bumper if needed
• Slide or press the old bumper out and install the new bumper until fully seated;
• Replace any damaged clips or fasteners with OEM parts for a secure fit

This top vent spacer positions and supports the exhaust components at the top outlet so the duct aligns and seals correctly. Proper spacing helps maintain airflow and reduces vibration or rattling during operation. A damaged or missing spacer can cause misalignment and air leaks.

• Spaces and stabilizes the top vent/adapter in the factory location
• Helps create a consistent seal at the top duct connection to prevent leaks
• Reduces vibration and noise from a loose or misaligned top vent
• Replace if cracked, missing, deformed, or if the top vent is loose, misaligned, or leaking air

• Disconnect power and disconnect any ducting before servicing
• Support the unit as needed to safely access the top vent area
• Install the spacer in the original orientation; reuse original fasteners when applicable
• After reassembly, verify the vent path is aligned and all joints are sealed before restoring power