Parts for Lg SKSDW2411T: Upper Rack Assembly Parts

Dissolves limescale, mineral deposits, and odor-causing residues from dishwasher tub and spray system. Use monthly to maintain peak cleaning performance.

This replacement wire rack restores secure support for items inside your appliance, helping dishes or cookware sit level and stay put. It returns worn or damaged shelving to safe, usable condition. What it does:

• Provides stable shelving to hold dishes, cookware, or clothing during cycles
• Prevents items from shifting, tipping, or contacting heating elements
• Replaces bent, rusted, or broken rack components that cause poor loading
• Helps reduce chips, scratches, and small breakages from unstable loads

• One replacement wire rack

• Disconnect power and water before servicing
• Remove any retained clips or rollers and transfer to the new rack if required
• Handle edges carefully; wire racks can have sharp points or coated finishes that chip

This replacement lower dishwasher rack provides a stable place to load plates, bowls and cookware so items stay organized and protected during wash cycles. It restores support and helps your dishwasher hold a full load securely. What it does

• Holds dishes, bowls and cookware in the lower dishwasher area to prevent shifting and contact during cycles
• Aligns with the dishwasher's roller tracks so the rack slides in and out smoothly
• Reduces the risk of chips and breakage by keeping items separated and upright
• Restores the intended loading capacity and organization of the lower rack

• One lower dishwasher rack

• Slide the rack onto the lower track rails; ensure rollers and stops are engaged before using
• Inspect rollers and track guides for wear; replace damaged hardware for proper function
• Unplug or disconnect power to the appliance before accessing internal components
• Handle edges carefully and avoid using excessive force when seating the rack to prevent damage

This oven rack is a replacement sliding shelf that restores a stable cooking surface for pans and cookware, letting you safely load and remove items without tipping or spills. What it does

• Supports cookware and bakeware while allowing smooth in-and-out sliding
• Replaces a warped, bent, or missing oven shelf that won't sit level
• Helps prevent uneven cooking caused by damaged or unstable racks
• Fits into existing oven rack guides to restore proper clearance and airflow

• One oven rack

• Remove power to the appliance or ensure the oven is fully cooled before installing
• Slide the new rack into the existing rack guides, aligning the rear feet with the guide slots
• Do not force the rack into place; inspect guides for damage if it won't seat smoothly
• Wear gloves to avoid sharp edges and wash the rack before first use

Dissolves limescale, mineral deposits, and odor-causing residues from dishwasher tub and spray system. Use monthly to maintain peak cleaning performance.

This nozzle assembly directs fluid or airflow where the appliance needs it, restoring proper dispensing or spray performance. Use this direct-fit replacement to address flow or alignment issues without replacing larger components. What it does:

• Directs and focuses fluid or air flow from the appliance outlet
• Helps restore proper dispense or spray pattern for normal operation
• Commonly replaced when flow is reduced, uneven, or the nozzle is damaged
• Works with the existing mounting and seals when undamaged

• One genuine-style nozzle assembly

• Disconnect power and/or shut off water supply before beginning work
• Inspect surrounding seals and gaskets; replace if cracked or deformed
• Typically installs with simple snap clips or a few fasteners—refer to your model's service instructions

This is a roller assembly that mounts on the left side of the upper dish rack, allowing it to slide in and out of the dishwasher smoothly. The roller rides along the track inside the dishwasher tub. Replace this roller if the upper rack is difficult to slide, tilts to one side, or if the roller is cracked, worn, or no longer spinning freely.

This roller assembly supports and helps the dryer drum turn smoothly, reducing noise and wear. Replace a worn roller to restore stable drum rotation and quieter operation. What it does:

• Supports the dryer drum so it spins evenly during drying cycles
• Reduces scraping, grinding or thumping noises caused by worn rollers
• Helps prevent excessive drum wobble that can stress the motor and belt
• Restores proper drum alignment to improve overall operation

• Disconnect power before starting any repair to avoid shock or injury
• Access usually requires removing the dryer cabinet or front panel — follow your model's service guide
• Inspect the belt and adjacent rollers for wear and replace if needed

The Tine Row Holder is an OEM part for LG dishwashers. It is a molded plastic bracket located inside the dishwasher that firmly holds the horizontal tine rows of the upper spray arm assembly in place. Subject to vibrations during the wash cycle, the tine row holder must securely grip this assembly.

Symptoms of a bad tine row holder include:

• Loosened or detached upper spray arm that causes insufficient washing 
• Rattling noises from loose components inside the tub 
• Potential leaks if the plastic material cracks fully over time

Causes of failure can include cracking of the holder plastic from solvent exposure and mineral buildup over thousands of wash cycles. Replace with this OEM LG part to ensure balanced water distribution to all areas of dishes. It is also compatible with Sears/Kenmore dishwasher models.

The Shaft,Nozzle is an OEM part for LG dishwashers. This part is located inside the dishwasher's spray arm assembly and is responsible for distributing water to the spray arms during the wash cycle.

Causes of failure can be mineral deposits that clog the nozzle openings or flexible shaft deterioration over time.

Symptoms of a bad shaft or nozzle include:

• Inadequate or uneven spray coverage inside the dishwasher
• Dirty dishes, especially on hard to reach areas
• Reduced water pressure during the wash cycle

This OEM LG part is also compatible with some Kenmore models.

This small plastic clip secures the tine rows to the pivot points on the dishwasher rack, allowing the tines to fold down or lock into the upright position. It snaps onto the rack rail and holds individual tine rows in place. Replace this clip if your rack tines are loose, won't stay upright, or have fallen off during a wash cycle.

Dissolves limescale, mineral deposits, and odor-causing residues from dishwasher tub and spray system. Use monthly to maintain peak cleaning performance.