Parts for Bosch WFL2090UC/23: Valve Assembly Parts

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.

This dispenser tray is a removable insert that fits inside the detergent dispenser drawer of a washing machine. It separates compartments for detergent, bleach, and fabric softener so each is dispensed at the correct point in the wash cycle. Replace this tray if it is cracked, warped, or clogged with residue that cannot be cleaned, which can cause improper dispensing of laundry products.

The washer lower dispenser tray is the plastic housing at the bottom of the detergent dispenser drawer that holds and channels laundry products into the wash drum. It guides detergent, fabric softener, and bleach into the machine at the correct time during the wash cycle. Replace this part if the tray is cracked, warped, or detergent is leaking out of the dispenser instead of flowing into the drum.

If detergent isn't dispensing properly or the drawer leaks, the dispenser case may be cracked or clogged. This replacement part restores function.

Washer not filling with cold water or filling slowly? This cold water inlet valve controls water flow into your washer. Moderate DIY repair.

The washer water inlet filter is a small mesh screen that sits at the water inlet valve connection point and catches sediment, debris, and mineral particles from your home's water supply before they enter the machine. Keeping this filter clear ensures proper water flow into the washer. Replace this part if your washer is filling slowly, not filling at all, or if the existing filter is torn, corroded, or too clogged to be cleaned effectively.

Delivers hot water from your heater to the washer. Replace if leaking, cracked, or damaged to prevent water damage. Verify fit with your model number.

This fastening ring secures mating appliance components by locking parts in place to prevent movement or separation during operation. It's a simple yet essential hardware piece that helps maintain proper alignment and reliable function. What it does

• Holds mating parts together to prevent wobble, vibration, or dislocation
• Keeps seals and assemblies properly seated to reduce noise and misalignment
• Helps maintain correct component spacing for smooth operation
• Commonly replaced when the original ring is bent, worn, or missing

• Designed for use with compatible OEM assemblies; follow for correct placement
• Inspect mating surfaces and replace any damaged clips, seals, or gaskets before reassembly
• Use proper tools to avoid deforming the ring during installation; do not force into place
• Disconnect power and follow safety procedures before servicing the appliance

Secures rotating components in your washer to prevent movement and vibration. Replace if parts feel loose or noisy. Confirm fit with your model number.

Fix washer drainage issues with this sump check ball. Prevents water backflow in the pump system. Simple DIY repair for most home mechanics.

Washer sump hose drains water from the pump to the drain outlet. Replace if leaking, cracked, or damaged. Verify fit with your model number before ordering.

Fix washer water level issues or won't fill correctly with a new pressure chamber. This part regulates water sensing for proper fill cycles.

Washer sponge absorbs moisture and prevents leaks. Replace if damaged, compressed, or no longer absorbing water. Confirm fit with your model number.

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.

Replacement mounting bracket holder that secures internal components in place. Install when original is cracked, broken, or missing to restore proper alignment.

Air duct for washer ventilation system. Installs between the tub and outer cabinet. Replace if cracked, damaged, or missing to restore proper airflow.

Drain hose for washers. Connects washer pump to drain standpipe to remove water during cycles. Replace if cracked, kinked, leaking, or damaged.

Washer not draining or leaving standing water? This drain pump removes water from the tub at cycle end. Requires front panel removal for installation.

The Washer Filter-Fluff is an OEM replacement part for Bosch washing machines. It is a critical component responsible for capturing lint, debris, and other particles that may accumulate during the wash cycle, preventing them from clogging the drainage system or causing damage to the machine.

Over time, the accumulation of lint and debris can impede the filter's effectiveness, leading to drainage issues and reduced washing performance. Physical damage to the filter can also compromise its ability to capture lint properly.

Symptoms of a bad washer filter-fluff include:

• Slow or incomplete draining of the washing machine
• Excessive lint on clothes after washing
• Unusual noises during the drain cycle
• Error codes related to drainage issues

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore washing machine models. 

Sump hose connects the washer tub to the drain pump. Replace if cracked, leaking, or worn to restore proper drainage and prevent water leaks during cycles.

Secures washer hoses to prevent leaks. Replace if cracked, loose, or causing water seepage. Verify compatibility with your washer model before ordering.

Fix washer overfilling or fill errors with this pressure chamber hose. Restores proper water level sensing by connecting the sump to the pressure chamber.

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.