Parts for Mtd 31AM62EE752: Way & 4-Way Extended Chute Parts

This is a carriage bolt, which is found on lawnmowers, snowblowers, and many other types of lawn and garden equipment. The carriage bolt is made of metal and the location will vary based on the model of the tool. The carriage bolt is used to fasten together two components on lawn and garden equipment. It can become damaged, break, or stripped and will need to be replaced.If the carriage bolt is broken, stripped, or has damage, a wrench will be needed to replace it. Make sure that the spark plug wire has been disconnected and the tool is turned off before you begin. Use the wrench to remove the carriage bolt before installing the new part in the same location. Replace any additional disassembled components removed to gain access to the bolt before using the tool.This carriage bolt is sold as an individual component. It is a genuine OEM replacement part that is sourced directly from the manufacturer. The bolt is designed to work with lawnmowers, chainsaws, snowblowers, tillers, and leaf blowers manufactured by Yard-Man, Bolens, Montgomery Wards, Huskee, MTD, Yard Machines, Husky, Troy-Bilt, Ryobi, Cub Cadet, and Craftsman.

A carriage bolt is a type of fastener. It features a smooth rounded head and a square domed top. It has threading, which leads to up to the square shoulder. The purpose of its square is to prevent the bolt from spinning. Once the carriage bolt is inserted through the hole, using a nut and washer can provide additional security. Carriage bolts can corrode and loosen over time. Since it doesn't have a slotted head, a socket wrench is needed when replacing. This bolt carriage replacement is compatible with wood chippers, tillers, string trimmers, lawnmowers, and edgers. It is a genuine MTD product that measures 5/16x.075. It has a smooth rounded head and square shoulder underneath it. This carriage bolt is sold individually.

This part is a replacement screw. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can replace a defective lost screw in outdoor power equipment.This screw is a standard piece of hardware used to secure together different components in many different equipment types. This part will need to be replaced if corroded, damaged, stripped, or lost. Always ensure that the equipment is completely powered off and is cooled down before attempting to start the repair process. For more accurate information on installation of this particular screw, reference the owner's manual or equipment diagrams for specific instructions and part location. This is an authentic OEM part and as such is sold individually and made from durable and high-quality materials. This screw can be used with outdoor power equipment manufactured by MTD, Craftsman, Troy-Bilt, and other brands.

This is a versatile screw designed with flanged hex head and double-lead threads. It is a high-low self-tapping screw with one thread that is high and the other low for easier penetration. The twin threads also reduce the amount of material displaced when the screw is driven into the material. This type of screw also creates a firmer grip. This screw can also be used to secure a newly installed front cover or grill. This part is available as an individual replacement part. It is a genuine OEM part for use with specific models of snow throwers, lawn tractors, electric mowers, chippers, and log splitters from Bolens, Cub Cadet, Craftsman, Poulan, Ryobi, Toro, MTD, Troy-Bilt, Yard Machines, and Yard-Man.

This clevis pin is a genuine MTD part, sold individually. This clevis pin can be used as a replacement part in a snowblower. The purpose of the clevis pin in a snowblower is to serve as a u-shaped fastening component used in the place of a bolt and rivet to secure various parts within the internal mechanisms of the appliance.The clevis pin in a lawnmower might have to be replaced if the clevis pin can no longer hold one or more components in place within the lawnmower. The clevis pin could suffer damage from general wear and tear with long-term use, due to collision with a hard object, or from exposure to the elements. If any damage occurs that reduces the functionality of the clevis pin, it should be removed and replaced by this genuine OEM replacement part.This component is a genuine OEM replacement part, sourced directly from the manufacturer. It is sold individually. This clevis pin is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Troy-Bilt, Yard Machines, Huskee, and Yard-Man.

A flange nut's unique wide flange design distributes the nut's pressure over the part it is securing. In return, it creates an even fastening surface, which reduces part damage and nut loosening. This one-piece all-metal fastener has a lock nut version that features a protruding circular flange. This drastically increases bearing surface, compatibility either for irregular or oversized holes, and surface tension reduction. Flange lock nuts are the preferred type of fastener for many lawnmower models because it can provide better fastening than regular screws, which are known to loosen under extreme vibration. However, it’s important to know that flange lock nuts are susceptible to wear and tear due to constant vibration exposure. It is essential to replace the broken flange lock nut immediately to prevent serious damage to the lawnmower. The MTD 712-04063 Flange Lock Nut OEM replacement can be used with Craftsman, White Outdoor, Yard Machines, MTD, or Columbia lawnmowers. It is a genuine or OEM MTD replacement part that measures 5/16-18. It is threaded and requires the use of a wrench. This replacement flange lock nut is sold individually. An MTD bolt carriage may also be needed and is sold separately.

A flange lock nut, also known as a flange lock or a lock nut, is created to be used in various types of lawn and garden equipment. This flange lock nut holds other parts in place and, when properly threaded, will resist loosening. Over time, a flange lock nut may begin to weaken and may become loose or break. If it appears to be broken or weak, a replacement is required. Flange locks can be adjusted and uninstalled after use. When replacement is required, you may need a socket set, screwdriver, hacksaw, and butane torch. The socket wrench will loosen the bolt it is connected to, while the torch is used to heat the lock nut. A socket wrench may remove the nut, but sometimes cutting it with a hacksaw is required. This flange lock nut is a genuine OEM component directly from the manufacturer and comes in an individual unit. It is made of metal, a gold color, and can be found in various areas of lawn equipment. It works with lawnmowers, trimmers, snowblowers, cultivators, tillers, and leaf blowers by Poulan, MTD, Toro, Cub Cadet, Murray, Troy-Bilt, Bolens, Yard Machines, Craftsman, and Yard-Man.

A cotter pin, also known as a hitch pin, is used to secure pins and shafts in place. Meant for snowblowers, riding lawnmowers, and lawn tractors, this bow-tie shaped cotter pin has a double-end design making it easy to pull or push through either side of a pre-drilled hole. This pin snaps into a locked position without tension, keeping it secure during operation. Designed for lawn and garden maintenance equipment, this part ensures secure fastening. If the power equipment is used frequently, cotter pins may have to be replaced regularly so it would be practical to keep extra bow tie cotter pins on hand. It is highly recommended that work gloves be worn during the installation of this part. This part is compatible with Craftsman, Cub Cadet, Troy-Bilt, Murray, Yard Machines, MTD, Huskee, Bolens, Yard-Man, and MasterCut brands of lawn mower, snowblower, and log splitters. This is a genuine OEM replacement part that is sold individually.

A star knob connects the upper and lower handles on an outdoor appliance, and if removed, the upper and lower handles are quick-released. This part is made of black heavy-duty black plastic, and the threads are made of steel. Over time, the threading can become worn out, making the connection loose, and causing the two handles to no longer stay in place. Star knobs are a straightforward repair that can be done in a matter of minutes. Just unscrew the original, damaged knob and screw in the new knob. The knob is designed to be unscrewed by hand, so there is no need for additional tools to make this repair. This genuine OEM replacement part is designed for a variety of outdoor appliances, including lawnmowers, edgers, chippers, tractors, trimmers, and cultivators. This star knob is compatible with Yard Machines, Yard-Man, Cub Cadet, Bolens, Craftsmen, and Ryobi products. This part ships individually.

This lower chute is a quality replacement part that is used on several models of snowblowers. It is made of high-quality plastic for durability and is placed so it can direct snow in a certain direction when it leaves a snowblower. Over time and with regular use, this part can become damaged. If this occurs, it will need to be replaced so the discharged snow ends up in the right location.When replacing the lower chute, a wrench and work gloves will be needed. The snowblower should be placed on a flat surface, and the spark plug wire needs to be disconnected. The gearbox and the lower chute will need to be removed before the new replacement part can be installed. Line up the chute and install it used the cotter pin and flange lock nut. Replace all the components before using the snowblower.This is an authentic OEM replacement part that is sourced directly from the manufacturer. It is sold on an individual basis. The lower chute is used with snowblowers manufactured by Craftsman, Cub Cadet, Huskee, MTD, Troy-Bilt, Yard Machines, and Yard-Man.

This chute tilt is also called a chute tilt cable guide or a bracket. It is a genuine MTD part and it is a replacement part for various makes and models of snowblowers. On snowblowers, the chute tilt attaches the chute control lever to the chute control cable and guides the cable while the lever moves.If the chute tilt is damaged, the snowblower may not be able to perform its function. Some disassembly is required to make this repair. Be sure to allow the engine to cool completely, empty the fuel tank, and disconnect the spark plug to prevent the engine from powering on. Always wear protective gloves as well. This hub cap is a genuine OEM part that is sourced directly from the manufacturer. It is sold individually. It is made to be compatible with equipment manufactured by Cub Cadet, Yard Machines, Yard-Man, Troy-Bilt, Craftsman, Huskee, and MTD.

The replacement flat washer here is a part commonly found on many types of small engines, including those in lawn and garden equipment. The washer can be used on various parts of the engine depending on the make and model. The washer can help to spread the pressure of the connection over a wider surface area. This will help reduce damage to the machine at the connection point. The washers are made from metal and there may be a need to replace them. If they have become corroded, bent, or lost, they should be replaced right away. Owners should keep in mind what with some models, the washers will be secured with the use of a push pin. The push pins are sold separately. This is an authentic OEM replacement flat washer that is sold individually. The washer can be used on many types of equipment including lawn mowers, snowblowers, tillers, string trimmers, leaf blowers, edgers, log splitters, and wood chippers. Compatible brands include Craftsman, Cub Cadet, Ryobi, Troy-Bilt, Husky, Yard Machines, MTD, Huskee, Montgomery Wards, Bolens, Yard-Man, Turf King, and MasterCut.

This shoulder screw is used with snowblowers from a range of manufacturers. It is a common piece of hardware that can be used for multiple applications. The screw will help to connect pieces of the snowblower tightly, so they do not move and rattle while the machine is in use. If the screw is not working properly due to damage, it should be replaced.The piece is made from durable metal. However, it might still need to be replaced at some point. This could be because the screw is lost when making other repairs to the snowblower. It might also be because the threads are stripped or because the screw has started to corrode. Regardless, owners should make the replacement as soon as they notice a problem.The screw can work with select snowblowers from MTD and Craftsman. Owners need to remember that this shoulder screw is sold individually. This is a genuine OEM replacement part that has been sourced directly from the manufacturer.

This replacement part is a chute rotation rod intended for use in snowblowers. It allows the user to adjust the direction of the snowblower's chute.A new chute rotation rod might be needed if the current one is damaged in any way. If the user is unable to control the chute part of the snowblower, it might be due to a missing or malfunctioning rod. If this is the case, be sure to replace this part as soon as possible. This is a genuine OEM replacement part manufactured by MTD. This part is sold individually.

This replacement part is a screw. This is a genuine replacement part made by MTD. This part is small but very important in many types of machinery. A screw typically works with other small parts like washers or nuts to keep other parts secure and in place. A new screw might be needed if the current one has been stripped or lodged in place. This part can become damaged due to normal wear and tear over time. If this is the case, it is best to replace it as soon as possible. This should be a simple repair and require common household tools like a screwdriver. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.

This replacement part is a gear. Gears are found within engines and work with other parts to allow for everything inside the appliance to run smoothly and effectively during use. The ridges on a gear might become stripped or worn with extended use. If the user hears unusual noises coming from inside the machine, it might be due to a misplaced or damaged gear. This is a genuine OEM replacement part manufactured by MTD. This part is sold individually.

This is a simple flat washer that can be used for lawn and garden equipment. Washers are used to help evenly distribute a load when they are used to fasten pieces together. This can help to reduce the risk of damage to the material. If the washers are missing or broken, it could create excess noise or vibrations depending on how or where they had been used.Washers tend to be durable, but they could still require a replacement. The washers could become bent or break over time. They could also become corroded or get lost when working on other parts of the machine. Owners should check the washers and replace them as needed.The washer here is for use with many types of lawn and garden tools from the likes of MTD, Yard-Man, Troy-Bilt, Craftsman, and Yard Machines. Keep in mind that each of the flat washers is sold individually. It is a genuine OEM replacement piece.

This is a replacement part for select riding mowers designed to ensure smooth rotation for years of use. This part is circular and tapers off into a hexagonal shape to support rotating shafts that create friction inside of machinery. Rotating parts are almost a given in most machinery like riding mowers, so the hex flange bearing provides support in multiple ways to parts such as wheels, rotors, and gears.The hex flange bearing serves two fundamental roles to make machinery run efficiently. For starters, friction will inevitably occur in rotating shafts, so bearings reduce the amount of friction and related wear and tear. The second function of this part is protecting the rotating from damage due to pressure created during operation.This genuine OEM sourced replacement part is intended to be used for lawn tractors from MTD and other yard machines. This part is compatible with manufacturers including Yard Machines, Bolens, Yard Man, Troy-Bilt, Cub Cadet, and Husky. A wrench may be used for an easier replacement installation. This item is available for purchase individually.

This replacement part is a control assembly and is intended for use in different types of lawn equipment. This is a genuine replacement part made by MTD. This specific control assembly is typically found in snow blowers. This part is situated towards the top of the appliance and assist the user in controlling the snowblower. This part is able to adjust the settings as well as the power during use. A new control assembly might be needed if the current one is damaged or broken in any way. Because this is a heavily used part it is not unusual for the area to become stripped or worn down after years of normal wear and tear. Be sure the appliance is completely powered down before starting to repair or replace this part. Refer to the specific user manual for more details on how to replace this part. This control assembly is sold individually and is sourced directly from the manufacturer. This part is a genuine OEM replacement part.

This replacement part is a cable plunge slide intended for use on lawn mowers. The cable plunge slide allows the user to adjust the cutting depth on the mower.A cable plunge slide may become stripped or worn down with normal use. When replacing this part, be sure to wear work gloves as the mower blades are typically very sharp.This is a genuine OEM replacement part manufactured by MTD. This part is sold individually.

This is a genuine OEM chute gearbox sourced directly from the manufacturer. It is designed for use on many different walk-behind snowblowers and two-stage snow throwers. The chute control motor activates the gearbox, which controls the chute's rotation to guide the direction that the snow goes as it is discharged. If the chute does not rotate when activated, the gearbox should be checked after checking for objects stuck in the chute. If there is nothing impeding rotation, the chute gearbox should be removed and replaced. Normal wear and tear can cause damage to the gears and prevent them from controlling the directional movement of the chute. The chute gearbox requires a wrench set, Phillips screwdriver, and needle-nose pliers. Wear work gloves to remove and replace the gearbox only after the snowblower has cooled down. After installing the gearbox and reinstalling the remaining parts, start the machine and make sure the discharge chute moves in all directions. This repair can be made in approximately fifteen minutes. This chute gearbox has a heavy-duty plastic housing; it is sold as one complete pre-assembled unit. The chute gearbox is compatible with snowblowers and snow throwers manufactured by Troy-Bilt, MTD, Yard Machines, Yard-Man, and Cub Cadet.