Weedeater Lawn Mower Parts

This no grease mandrel assembly is the part that houses the shaft where the mower blade attaches. It is mounted to the deck of the mower by three bolts, which are sold separately. The mounting holes on the mandrel housing are not threaded, but the bolts used to secure the mandrel to the deck are self-tapping. If the lawnmower is no longer providing an even cut, there may be a problem with the mandrel assembly. A broken or damaged mandrel assembly can severely reduce the mower's cutting performance. Replace it as soon as possible. The mandrel shaft goes through the deck, and the pulleys are attached to them, then the belt that drives the mandrels is placed in the pulleys. A spacer must be installed under the pulley. Failing to use a spacer or installing it on top of the pulley will result in damage to the shaft and pulley. This mandrel assembly is compatible with Ariens, Craftsman, Husqvarna, Poulan, and Weed Eater lawn mower models. It is an OEM part sourced directly from the manufacturer and is sold individually. The mandrel assembly includes a housing, shaft assembly, bearing, and nut only; the pulley/washer and blade bolt/washers are not included.

This part is a replacement lift assembly. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a broken or defective lift assembly in lawn tractors and lawnmowers.The lift assembly enables the user to efficiently adjust the height of the mower deck, thus selecting the length they wish to cut the grass. The lift assembly connects to the front of the mower deck. If this part breaks off or becomes dented or otherwise damaged, the deck will not be adjustable and thus the lift assembly will need to be replaced. It's important when working on or near an engine to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this lift assembly, the appropriate owner's manual and equipment diagrams should be utilized.As an authentic replacement part, this lift assembly is suitable for use on several different models of lawn tractors and lawnmowers manufactured by Husqvarna, Poulan, and other brands. Please This is a genuine part made of high-quality, durable metal and is sold individually.

This is a quality replacement wheel assembly that is made for use with various lawnmowers. It is a rear wheel and located at the back of the lawnmower. The purpose of this part is to support the equipment and hold it away from the ground. It also makes it easy to use the lawnmower to cut the grass. The wheel assembly is made of durable plastic but can experience damage over time. It can also wear down through regular use and will need to be replaced.If the wheel assembly needs to be replaced, a socket set, pliers, wrench, and work gloves will be needed. Take the lawnmower and turn it off before placing it on a stable surface. Before moving forward, disconnect the spark plug wire for safety. Take the original wheel off of the lawnmower before replacing it with the new part.This wheel assembly is a genuine OEM replacement part that is sourced directly from the manufacturer. The part is sold as an individual item. It is made to use with a variety of lawnmowers manufactured by Husqvarna, Craftsman, Poulan, and Weed Eater.

This throttle control cable is an OEM part sourced directly from the manufacturer, and it is sold individually. It is manufactured by Husqvarna. This control cable is designed for use with lawnmowers. It is compatible with products from brands such as Craftsman, Husqvarna, Weed Eater, Poulan, and Ariens.The throttle control cable is used as a connector between the control bail and the carburetor. Over time, with regular wear and tear and exposure to the elements, throttle cables can break at the ends or become frayed and may need to be replaced. The replacement or repair process of the control cable is straight-foward, but the user replacing the part should always wear gloves during any assembly, replacement, or installation processes. The user should also refer to the owner's manual of their equipment and any guiding diagrams that clarify the placement location.

This 1/4-20 hex nut has a great variety of uses on lawn and landscaping equipment. As a lock nut, it can be tightened and retains its grip, even without the use of a washer. This particular piece of hardware appears in many connective points on push mowers, zero-turn mowers, riding mowers, tillers, lawn tractor implements, and other types of equipment manufactured by Husqvarna, Poulan, Jonsered, and Weed Eater. For instance, with MTD mulching mowers, these hex nuts are used to secure the mower housing to the manifold of the mower. More than just with gasoline-powered lawn tools, these versatile nuts are also found on handheld tools like impact wrenches and tools driven by compressed air. Hex nuts bind tightly with their locking grip and seldom come off. The more likely scenario, especially since so many are used in manufacturing and by power tools, is that these nuts will become lost in the course of maintaining, cleaning, and repairing mowers and other equipment. For this reason, it's always important for the user to purchase more than the anticipated number needed. Make sure also to purchase hex nuts like these that are OEM certified and guaranteed.

This replacement part is a screw. This part is small but very useful in many kinds of machinery. This part connects components and ensures that they are secure.Screws may become stripped with overtightening, or corroded from exposure to the elements.This is a genuine replacement part made by Husqvarna. It is an OEM replacement part which will ensure a proper fit. This part is sold individually.

This genuine Tecumseh replacement part is a brake pad for use with lawn tractors and riding lawn mowers. A properly functioning brake pad is essential for the safe and reliable use of a lawn tractor or riding mower. When the brake pedal is pushed, the brake pad applies pressure to the brake disc to stop the lawn tractor or mower from moving. Brake pads may become worn out or damaged with extended use, necessitating replacement. Remember to check the brake pad periodically to spot any wear or damage. This part is an identical replacement for a brake pad that is missing, worn out, or damaged. Prior to working with this part, please refer to the original product manual for a full list of included parts and installation instructions. A nut driver, wrench set, floor jack, and socket set are required for installation of this part. For safety, always wear gloves and ensure unit is powered down prior to performing any installation or repair.This high quality OEM replacement part is sourced directly from the manufacturer, and is sold as a pair. This part is compatible with a variety of Craftsman, Troy-Bilt, and more lawn tractors and riding mowers. Please note: original part numbers TC-799021A and 790006A are now obsolete, and manufacturer has replaced the original part numbers with this part.