Whirlpool Cooktop Grate, Grate Feet, Griddle

The Foot Pad Kit for Whirlpool ranges is an OEM part specifically designed to fit underneath the grates. These small but critical components provide cushioning and stability for the grates, preventing them from scratching the cooktop surface and reducing noise and movement during cooking. 

Symptoms of worn or missing Foot Pads include:

• Grates that wobble or shift during use
• Increased noise, such as rattling or scraping, when moving pots and pans
• Scratches or other damage to the cooktop surface beneath the grates
• Uneven cooking surfaces which can affect the stability of cookware

Causes of degradation in foot pads can include high heat exposure, frequent cleaning that wears down the material, or the natural breakdown of rubber or silicone over time.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Burner Grate Insert is an OEM part for Whirlpool stoves. It provides a stable and heat-resistant surface for cookware, ensuring even heat distribution while cooking. The grate measures approximately 9" x 11". 

You should replace the burner grate insert if it becomes damaged or worn out. Causes of a bad burner grate insert can include prolonged exposure to high heat, accidental impact, or regular wear and tear. These issues can compromise its stability and heat resistance, affecting cooking performance.

Symptoms of a bad burner grate insert include:

• Uneven or unstable cooking surface
• Visible cracks or chips
• Difficulty in placing or balancing pots and pans
• Discoloration or warping

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Grate Pad is an OEM part for Whirlpool cooktops. It is designed to fit onto the grates of the cooktop, providing stability and protecting the cooktop surface from scratches and damage. This is a kit of four grate pads. If you also need the adhesive, order part number W10841140.

You should replace the grate pads if they become worn out or damaged. Causes of bad grate pads can include exposure to high heat over time, physical damage from heavy cookware, or regular wear and tear from frequent use.

Symptoms of bad grate pads include:

• Grates that wobble or do not sit securely
• Scratches or damage on the cooktop surface
• Uneven cooking due to unstable grates

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Grate Kit is an OEM part for Whirlpool gas ranges. The burner grates sit on top of the stove, providing a stable surface for pots and pans during cooking. These grates are designed to withstand high temperatures and support cookware securely. Note: Kit of 4 grates

Causes of a bad grate can include prolonged exposure to heat, accidental dropping of heavy cookware, or normal wear and tear from regular use.

Symptoms of a bad grate include:

• Chipped or cracked grates
• Uneven or unstable surface for cookware
• Difficulty balancing pots and pans during cooking
• Rust or discoloration on the grate surface

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Burner Grate Foot Pad Kit is an OEM part for Whirlpool cooktops. This kit includes multiple foot pads, which are attached to the bottom of the burner grates. These parts play a significant role in stabilizing the grates, preventing them from scratching the surface.

Causes of a bad Burner Grate Foot Pad can include regular wear and tear from daily use, high heat, and cleaning processes that can degrade the material over time.

Symptoms of a bad Burner Grate Foot Pad include:

• The burner grate wobbling or not sitting flush on the cooktop.
• Scratches or abrasions on the cooktop surface beneath the grates.
• Increased noise when placing or moving the grates, due to metal-on-metal contact.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Grate Set is an OEM part for Whirlpool ranges and cooktops. It consists of the grates that sit atop the cooktop surface, providing a sturdy platform for pots and pans during cooking. Note: Contains Left and Right grates. For Grate foot, order W10919249

Causes of a bad part can include exposure to high temperatures over time, impact or dropping, or general wear and tear from regular use.

Symptoms of a bad Grate Set include:

• Warping or bending of the grates
• Grates not sitting flush or level on the cooktop
• Cracking, chipping, or excessive wear on the grate surfaces
• Unstable or wobbly grates, posing a potential hazard

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Replace worn or damaged cooktop grates with this grate kit to restore a stable, level platform for your pots and pans. It helps maintain safe, consistent pan support and keeps your range or cooktop looking and performing its best. What it does:

• Supports cookware above the burners at the correct height
• Restores level, stable pan support when grates are cracked, warped, or missing
• Helps reduce rocking or tipping of pots and pans
• Common signs it's needed: chips or cracks, grates won't sit flat, unstable cookware

• One grate kit

• Turn off all burners and allow the appliance to cool completely before handling
• Lift off old grates; clean support ledges and burner surrounds
• Position new grates per the burner layout; ensure they sit level and centered
• Verify pan stability before cooking

This surface burner grate kit restores a level, stable cooking surface on your gas cooktop or range. Replace worn or damaged grates to improve pot stability, maintain proper flame clearance, and refresh the look of your appliance.

• Supports pots and pans above the burners at the correct height for efficient, even heating
• Provides a stable, level surface to help prevent cookware from rocking or tipping
• Replace if grates are cracked, warped, heavily chipped, or the finish is excessively worn
• Helps protect the cooktop surface from direct cookware contact

• Turn all burners off and allow the cooktop and existing grates to cool completely before handling
• Lift off old grates; clean the cooktop surface before installing new parts
• Set new grates in place, ensuring they sit flat and align properly over each burner
• Do not drop or slam grates; heavy cast components can chip or crack if impacted

The Grate Kit is an OEM part for Whirlpool ranges. It includes several pre-cut heavy-duty grates that sit above each burner on the range cooktop. Together, these individual grates provide an even, resilient support structure for pots and pans during cooking. 

Causes of a bad grate kit can include cracks or broken tabs on individual grates from years of use and repeated exposure to heating cycles. 

Symptoms of a bad grate kit include:  

• Warped or misshapen grates that rock or wobble when holding cookware
• Detached or missing grates that compromise safety and performance
• Discoloration, cracking, or pitting on grate surfaces over time

Compatible replacements for Maytag, Jenn-Air, Magic Chef, and Kenmore assure lasting quality. Install yours today for safe, dependable cooking.
 

The Grate-Kit is an OEM component designed specifically for Whirlpool kitchen ranges. This kit contains the replacement grates that sit atop the burner elements. The grates are responsible for providing an even cooking surface while elements are in use. 

Causes of bad grates can include warping, discoloration, or pitting due to continuous high heat exposure over time. Thin or warped grates may no longer distribute heat evenly across pans.

Symptoms of bad grates include:

• Uneven or inefficient cooking 
• Food burning more easily
• Visible wear like scratches or pits on cooking surface
• Grates that are loose, wiggly, or difficult to remove

 This replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This replacement griddle creates a flat, stable cooking surface on your range or cooktop. It sits on the designated grate area over the burner(s) to restore safe, even griddle cooking when the original is missing or damaged.

• Provides a flat griddle surface by resting on the designated grate/burner area
• Helps distribute heat across the cooking surface
• Restore safe operation when the original is cracked, warped, chipped, or missing
• Common signs to replace: rocking/unstable surface, visible damage, or the griddle no longer seats properly on the grate

• Turn off all burners and allow the appliance to cool completely before handling
• Remove the standard grate(s) from the griddle location
• Set the griddle on the designated grate area and ensure it is fully seated and stable over the burner(s)
• Preheat gradually and follow your Use & Care Guide for operation and cleaning

This replacement griddle sits over your range or cooktop burners to provide a flat, removable cooking surface. Use it to restore a level cooking area when the original is worn, damaged, or missing.

• Creates a flat cooking surface above the burner(s) for items like pancakes and sandwiches
• Helps distribute heat from the burner across the plate for more even contact
• Replace if cracked, warped, chipped, or heavily worn
• Common signs include rocking or poor fit, visible damage, or a degraded cooking surface

• Turn off all burners and allow the cooktop and griddle to cool completely before handling
• Position on the designated grate or locator tabs per your model's orientation
• Follow care and cleaning guidance in your owner's manual

The Burner Grate is an OEM part for Whirlpool ranges and cooktops. This grate provides a stable surface for pots and pans, ensuring even heating and secure placement during cooking.

Causes of a bad burner grate can include exposure to high heat, which can cause warping or discoloration, physical damage such as chips or cracks from heavy cookware or accidental drops, and general wear and tear over time. These issues can affect the grate's stability and the cooking performance.

Symptoms of a bad burner grate include:

• Warping or bending
• Visible cracks or chips
• Uneven cooking surfaces
• Pots and pans wobbling or not sitting securely

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Surface Burner Grate is an OEM part for Whirlpool ranges. It provides support and stability for your cookware while evenly distributing heat for efficient cooking.

A bad surface burner grate can be caused by regular use, accidental damage, or wear and tear over time. If you notice issues such as a cracked or warped grate, difficulty in placing or removing cookware, or uneven heating on the stovetop, it may indicate a problem with the surface burner grate.

Symptoms of a bad surface burner grate include:

• Uneven heating or hot spots on the stovetop
• Instability or wobbling of cookware during cooking
• Difficulty in cleaning due to damaged or warped grate surfaces

This Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

Color: Black. Includes one double grate. For gray order WPW10180089.

This replacement grill grate restores a sturdy, level grilling surface on your cooktop or range. Replace a cracked, warped, or missing grate to maintain safe support and consistent heat over the grill area.

• Provides the elevated grilling surface above the heat source for stable, even cooking
• Keeps food positioned at the proper height for consistent searing and results
• Replace if cracked, broken, warped, or heavily corroded
• Helps resolve rocking/unstable surface or uneven cooking caused by a damaged grate

• Turn appliance off and allow all surfaces to cool completely before handling
• Lift off the old grate and clean debris from the support ledges or frame
• Set the new grate in the correct orientation; ensure it sits flat and stable
• Verify proper clearance around adjacent components before use