Whirlpool Cooktop Touch Pad

Best Seller

Genuine Whirlpool part

Whirlpool Membrane Switch Touch Pad

By: Whirlpool

Part Number: WPW10207928

The Oven Membrane Switch is an OEM part for Whirlpool ovens. It serves as the interface for selecting and controlling various cooking functions. The membrane switch panel responds to touch inputs, allowing users to set temperatures, timers, and other oven settings efficiently.

Over time, the membrane switch can become faulty due to regular wear and tear, exposure to heat and moisture, or accidental damage. These factors can lead to malfunctions in the touchpad or its responsiveness.

Symptoms of a bad membrane switch include:

Unresponsive or intermittent touch controls
Error codes displayed on the oven
Inability to set or adjust cooking functions
Some buttons not working at all

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This part fixes the following symptoms

Touchpad does not respond

Do-It-Yourself Stories from Customers like You The oven control pad bake button is not functioning Roy K. • Elmhurst , IL • May 16, 2014

Took off the the front panel. First removed the knobs, then the four screws above each knob stem. With oven door open removed four screws under the front door oven panel. Last removed the two side screws on the oven control. Keeping hold of the front unit. Then removed the pigtail attached to the panel and the ground screw. Now the unit is detached. Then removed control box with the two screws. This did two things. One easier access to the ribbon inserts for easier removal. Second since the... Read more

$169.95

Compare At:: $202.24
You Save:: $32.29

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Whirlpool Membrane Switch (Stainless Steel)

4.9 (8)

By: Whirlpool

Part Number: WP9756559ES

This membrane switch in a stainless finish is the touchpad/keypad behind the oven or range control console. It registers your button presses and sends them to the control board to restore reliable input when keys stop responding.

Provides the touch-sensitive keypad for selecting bake, broil, temperature, timer, and other functions
Ribbon cable carries keypad signals to the electronic control (clock/oven control)
Typical symptoms of failure: some or all keys unresponsive, intermittent inputs, unintended beeps, or keypad-related error messages
A failed keypad can prevent the appliance from starting or accepting commands

What's included: 1 membrane switch in stainless finish Install notes:

Disconnect power at the breaker before servicing
Remove the control console/rear cover to access the keypad and control board
Carefully unplug the ribbon cable; avoid creasing and keep contacts clean
Align and mount the new membrane, reconnect, reassemble, and test all keys

This part fixes the following symptoms

Touchpad does not respond

Do-It-Yourself Stories from Customers like You Kitchenaid gas range membrane switch replacement Michael W. • Akron , OH • November 22, 2016

I looked online for possible repair solutions when the range would not turn off. I found that the membrane switch goes bad on these models. I looked online for available parts and Appliance Parts Pros had the item in stock. I ordered and it was here the next day. After receiving the part, again, I looked online for how to replace the membrane switch and youtube video walked me through the steps. It took about an hour and now it works like new. Read more

$187.95

Compare At:: $223.66
You Save:: $35.71

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Whirlpool Membrane Switch (Touchpad)

4.8 (6)

By: Whirlpool

Part Number: WPW10207933

This membrane switch is the thin keypad mounted behind the control console that sends your button presses to the electronic control. Replacing a worn membrane restores reliable input when keys stop responding or register intermittently. What it does:

Detects button presses and relays them to the control board
Common fix for unresponsive or intermittent keys
Can address "stuck key" beeping or key-related error indications
Restores ability to select settings and start/stop functions

What's included:

1 membrane switch

Install notes:

Disconnect power before servicing; on microwaves, high voltage can remain—use proper discharge procedures.
Remove the control panel/console to access the keypad.
Handle the ribbon cable carefully; fully seat the connector.
Clean the mounting surface and align the new membrane before pressing into place.

This part fixes the following symptoms

Touchpad does not respond

Do-It-Yourself Stories from Customers like You Certain buttons on touch pad membrane (timer most notably) failed Gary E. • Smyrna , GA • March 11, 2016

Replacing the switch membrane restored full function. Relatively easy. Had to pull stove out just a few inches to provide access to two side screws holding control enclosure. Then four screws on bottom edge just above oven door. Then a screw above each burner control. And one screw on the top edge at each corner (right screw additionally holding a ground wire). That allowed the structure to come out. Helper required to hold structure while I worked to unplug the old switch-membrane from... Read more

$156.67

Compare At:: $188.00
You Save:: $31.33

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Whirlpool Switch Membrane Touchpad

5.0 (3)

By: Whirlpool

Part Number: WP9761566

This genuine OEM replacement part is a switch membrane touchpad made for ovens. The switch membrane touchpad is the plastic display piece on the oven that holds the buttons that control the oven's essential functions. If the touchpad is worn out and the buttons are no longer responding when pushed, it might be time to replace the touchpad. Luckily replacing this part is not a difficult repair.To replace a damaged touchpad, make sure to turn off all power to the oven by unplugging the appliance or shutting off the circuit breaker. After the power to the oven is turned off, take a putty knife to pry off the old touchpad cover. Gently pull it away from the stove's control panel until it comes off. There should be enough adhesive left over to place the new touchpad back to its original place. Be sure to line up the touchpad so that it fits perfectly. This replacement part is sold individually and is compatible with Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Sears/Kenmore brand ovens.

Do-It-Yourself Stories from Customers like You The kitchen aid oven keypad had an error message saying a key was stuck Michelle I. • Hayden , ID • September 09, 2014

I read about the particular error code on blogs online. Most people agreed that it was the keypad membrane that was not working. I have never done any repairs on an appliance, but YouTube had great videos of someone changing out that particular part. I could have ordered the part for less through an appliance supply store locally, but they did not offer any return option on electronics. I ordered through Appliance Parts Pros and they were very prompt in their delivery. I am thrilled to say... Read more

$227.72

Compare At:: $268.71
You Save:: $40.99

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Whirlpool part

Whirlpool Membrane Switch Touch Pad

5.0 (7)

By: Whirlpool

Part Number: WP9756595ES

This is a switch membrane, also known as a keypad, that is used with ovens, ranges, and stoves. The part is located in the center of the front of the appliance. It is made up of several layers and acts as a switch to turn the appliance on and off. It also includes several buttons so users can choose cooking settings, set temperatures, and otherwise alter the operation of the appliance.Regular use or damage can cause the switch membrane to become damaged. When this occurs, the buttons may not work correctly or there may be no way to turn the appliance on and off. If this is the case with a switch membrane, it should be replaced. Unplug the appliance and remove the screws from the back. Find the tabs on the side and press them to remove the housing. Remove the bottom screws to take off the ribbon connector. Remove the original part and replace it with the OEM replacement component.Created for compatibility with KitchenAid ranges, ovens, and stoves, the switch membrane is sold as a single part. This is an authentic OEM replacement component that is sourced straight from the manufacturer.

This part fixes the following symptoms

Touchpad does not respond

Do-It-Yourself Stories from Customers like You The off button didn't work Andrew T. • Oshkosh , WI • January 16, 2015

Unplugged the stove. I had to remove mounting screws from under front panel. Then Remove the side panels in order to remove the trim. Under the trim there are two gold screws that hold the front panel in place. Unplug the membrane switch and remove the 4 screws that hold it in place. mount the new membrane switch and use plug it in. Then replaced all screws. Plugged stove back in. It took me about 45 minutes to find the final screws hidden under the trim under the side panel. Also make... Read more

$232.95

Compare At:: $274.88
You Save:: $41.93

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Whirlpool part

Whirlpool Membrane Switch (Touchpad)

5.0 (4)

By: Whirlpool

Part Number: WPW10207930

The membrane switch is the low-profile keypad behind your microwave's control panel. It registers button presses so you can select settings and start cooking. Replace it if keys stop responding or require excessive pressure.

Converts keypad presses into signals for the electronic control
Enables selection of power levels, cook times, and options
Common symptoms: some or all keys don't work, intermittent response, must press very hard
If the unit won't start/stop from the keypad, the membrane switch may be faulty

What's included: 1 membrane switch Install notes:

Disconnect power at the breaker before servicing
Remove the control panel to access the keypad; note ribbon orientation and routing
Handle the flexible ribbon carefully—don't crease it—and fully seat/lock the connector

Do-It-Yourself Stories from Customers like You Some digits on membrane did not work Fred H. • Farmingville , NY • December 31, 2014

I called Appliancepartspros.com they suggested first to replace the membrane first. I removed the old one and connected the new one temporary. Tested every button, then after everything worked I stuck the membrane to the stove. The only problem I had was trying to remove the ribbon cables from the circuit board.They are in very tight. Read more

$182.60