Whirlpool Microwave Tray & Related

The Cooking Tray Coupler is an OEM part replacement part for Whirlpool microwaves. It securely connects the two halves of the microwave cooking tray together, allowing for easy placement and removal of food items. 

Symptoms of a bad cooking tray coupler include:

• The cooking tray separating into two loose pieces that do not stay connected
• Food sliding off or falling through gaps in the disconnected tray halves 
• Inability to use the microwave cooking tray properly

Causes of a bad coupler can be cracks, breaks, or wear over time that compromises its connecting ability. 

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Note: This coupler is compatible with the glass tray that has the 3 half circles that engage the coupler. In some cases, the factory used a tray that has 3 triangles. For that coupler, use part# W11245707.

This is the glass turntable tray inside your microwave. It rests on the roller guide and engages the center coupler so dishes rotate for even heating. Replace a cracked, missing, or unstable tray to restore safe, consistent cooking. What it does:

• Provides a flat, easy-to-clean surface for plates, bowls, and microwave-safe cookware
• Rotates with the turntable system to promote uniform heating and defrosting
• Restores proper seating if the original tray is cracked, chipped, or missing
• Common signs: visible damage, wobbling, or food not rotating evenly

• 1 glass turntable tray

• Disconnect power before servicing; allow the oven to cool and handle glass carefully
• Lift out the old tray; clean the roller ring and cavity floor
• Align the tray's center hub with the coupler and set it level on the roller ring
• Spin by hand to ensure free movement before use; do not operate with a damaged tray

Restore your microwave's two-level cooking capability. This removable meal rack sits above the turntable to support a second layer of dishes during approved modes, replacing a lost or damaged rack so food heats and circulates as intended.

• Creates a second level for multi-item cooking when your model supports rack use
• Positions food for proper airflow during convection, grill, or combination cycles
• Direct replacement for an original rack that is missing, bent, or corroded
• Addresses wobbling or arcing that can occur with a damaged or improperly positioned rack

• Use only in models designed for a rack; your owner's manual for approved modes and placement
• Set the rack on the designated supports and ensure it does not contact the cavity walls
• Remove the rack for standard microwave-only cycles if your manual instructs
• Allow the oven to cool before handling the rack

Comes with 4 supports. Color: chrome.

This removable cooking rack is designed for use during convection or combination cycles in compatible microwave ovens. It elevates food for proper airflow and browning, restoring full cooking capacity when the original rack is missing or damaged.

• Provides a stable, elevated surface for cookware in convection and combo-cook modes
• Improves air circulation for more even baking/roasting during convection cycles
• Replaces a lost, bent, or pitted rack that can lead to arcing or uneven results
• Supports two-level cooking when permitted by your model's instructions

• Allow the oven to cool before handling; remove the old rack and clean the support areas
• Seat the rack on the designated guides/hooks and ensure it is level and not touching cavity walls
• Use only as directed in your owner's manual; improper placement or cycle selection can cause arcing/sparking

This support secures and stabilizes a mating component inside your appliance, helping restore proper alignment and fit. Replace a damaged or missing support to stop wobble, sagging, or misalignment.

• Provides structural backing to keep the attached part level and in place
• Helps eliminate rattling, shifting, or uneven gaps
• Replace if cracked, deformed, or missing
• Symptoms can include loose or sagging parts, poor alignment, or difficulty reinstalling shelves/panels

• Disconnect power (and shut off water, if applicable) before service
• Remove the affected shelf/drawer/panel to access the support
• Transfer and reuse any model-specific fasteners or clips
• Seat the new support fully and check alignment before reassembly

The Microwave Coupler is an essential component for maintaining your Samsung microwave's performance. This genuine OEM part ensures a precise fit and reliable connection, compatible with a variety of Samsung microwave models. Crafted from high-quality materials, the coupler provides durable support, enhancing the stability and functionality of your appliance. By replacing a worn or damaged coupler with this genuine OEM part, you can restore your microwaveGÇÖs efficiency and prevent potential operational issues. Installation is straightforward, making it an ideal choice for DIY repairs and helping you save time and money. The Microwave Coupler not only ensures your microwave operates smoothly but also extends the lifespan of your appliance. Trust in this high-quality part to deliver dependable performance and improve your overall kitchen experience.

This support is a factory mounting piece that secures and aligns its mating component inside the appliance. Replacing a worn or broken support restores proper fit, stability, and smooth operation of the associated assembly.

• Provides structural support and accurate positioning for the designated part
• Helps prevent sagging, looseness, and vibration
• Maintains alignment so components latch/seat correctly
• Typical failure signs: cracked or missing support, rattling, misalignment, or parts that won't stay in place

• Disconnect power before servicing; also shut off the water supply
• Note the original orientation; transfer any screws, clips, or spacers from the old support
• Install without overtightening to avoid damage; secure fit of the supported component after installation

Color: gray. Measures about 3 inches in diameter.

This factory support stabilizes and positions its mating assembly so it stays secure and aligned during use. Replacing a worn or broken support helps restore proper fit and prevents looseness or shifting that can affect performance. What it does

• Provides structural support and correct positioning for the related assembly
• Helps prevent wobble, sagging, rattling, or misalignment
• Typical failure signs: visible cracks, broken/missing tabs, or a loose fit
• Can help resolve components not staying in place or moving unexpectedly

• 1 support

• Disconnect power to the appliance before servicing
• Access the support location and note the original orientation
• Transfer and reuse any original mounting hardware your model uses
• Seat the new support fully and verify a secure fit before restoring power

This coupler connects the motor to the transmission to transfer drive force, restoring reliable agitation or spin. It's a direct-fit replacement that helps stop slipping and irregular spin caused by a worn or broken coupler. What it does:

• Couples the motor shaft to the transmission/driveshaft so the washer can agitate and spin
• Transfers torque from the motor to the transmission for normal cycle operation
• Worn or failed couplers can cause loud grinding, clunking, or loss of agitation/spin
• Replacing a damaged coupler eliminates slippage and restores proper drivetrain function

• One coupler

• Disconnect power and water before beginning any repair
• Installation may require removal of cabinet or access panels; follow OEM instructions
• Inspect adjacent components (motor mounts, transmission, clutch) while replacing the coupler

The Microwave Coupler Assembly is essential for maintaining the optimal performance of your Samsung microwave. This genuine OEM part ensures a precise fit and reliable connection within your appliance, enhancing its overall functionality. Designed specifically for Samsung microwave models, the coupler assembly facilitates seamless operation between critical components, helping your microwave run smoothly and efficiently. Its durable construction guarantees long-lasting performance, reducing the need for frequent replacements and providing peace of mind. Installing the Microwave Coupler Assembly is straightforward, allowing you to restore your microwaveGÇÖs efficiency without any hassle. By choosing this genuine OEM part, you ensure compatibility and quality, which are crucial for the safe and effective operation of your appliance. Whether you are addressing a malfunction or replacing a worn-out component, the Microwave Coupler Assembly offers a dependable solution to keep your kitchen appliance running reliably. Trust in this high-quality part to deliver the performance you expect from your Samsung microwave, ensuring delicious meals are always just a few moments away.

The Microwave Roller Guide Assembly is an essential component for maintaining the smooth operation of your Samsung microwave. This genuine OEM part ensures precise alignment and stability for the microwave door, allowing it to open and close effortlessly. Crafted from durable materials, the Roller Guide Assy is designed to withstand regular use, providing long-lasting performance and reliability. Installing this assembly helps prevent misalignment and reduces wear on other microwave parts, extending the lifespan of your appliance. Compatible with a wide range of Samsung microwave models, the Microwave Roller Guide Assembly offers a perfect fit and easy installation process. Whether your original guide rollers are worn out or damaged, replacing them with this genuine OEM part restores your microwave's functionality and ensures optimal performance. Enhance your microwave's efficiency and durability with the reliable Microwave Roller Guide Assembly .

This Pan-Crisp is a replacement oven crisping tray that helps brown and crisp foods for better texture and finish. It restores the oven's ability to deliver even surface browning for items like pizzas, fries, and handhelds. What it does:

• Provides a flat, heat-conductive surface to promote browning and crisping of baked or roasted foods
• Helps improve finish and texture when original pan is warped, dented, or missing
• Reduces soggy bottoms by elevating food for better air circulation
• Compatible with convection and conventional bake modes where a crisping tray is specified

• 1 Pan-Crisp replacement tray

• Allow oven to fully cool and disconnect power before removing or installing the tray
• Slide into the oven rack supports; no tools required for typical tray exchange
• Inspect supports and mounting rails for damage before use; replace if unstable
• Clean per manufacturer recommendations; avoid abrasive cleaners that can damage the surface