Ronald O Saginaw , MI February 26, 2016 Appliance: Model MAYTAG Door spring was week or broke Purchased door springs from Appliance Parts pros.com, installed them and door on our Dishwasher was back to normal, Had to pull out dishwasher from under cupboard to get to springs, as they were on the sides of the dishwasher. Read More... 5 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 30-60 minutes Tools: Adjustable Wrench, Pliers, Screwdrivers
William F New Port Richey , FL January 16, 2018 Our dishwasher door and no tension in it if you let it go it would fall down hard. Unscrewed the top interior washer from the countertop. Pulled the dishwasher out so I could see where the broken plastic bushing door spring came from. Viewed your video (love it) and could see exactly what I needed to do. Attached the new parts, corrected the adjustment legs on the washer to where they needed to be and DONE. Read More... 3 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 30-60 minutes Tools: Screwdrivers, Socket Set, Wrench Set
Ronald O Saginaw , MI May 28, 2018 Door kept falling open Installed New Springs and Friction Pads, bought a door seal for future use... First I had to shut off power supply, then disconnect wires from junction box. Unscrew top screws from counter top, and lower adjustment leg screws to lower machine enough to pull it out so I had access to door hinge. Disconnected old springs, both side, replaced Friction Pads with screw driver, and then installed new Door Springs with pliers. Pushed washer back in place and re-hooked up wiring and adjusted foot screws and counter screws, and then tested out machine running a wash cycle.... Read More... 2 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 30-60 minutes Tools: Nut Drivers, Pliers, Screwdrivers
Bebe D Tucson , AZ May 17, 2016 Appliance: Model WHIRLPOOL 2200 Dishwasher door would drop down I orered new springs from you and i followed some instructions i found on the Internet. First, i removed two screws that were holding the appliance in place, then i wiggled the dishwasher out about a foot, removed the old springs, neither of which were broken, installed the new springs, but on a different hook to give it more tension. I pushed the dw back, replaced the two screws, and that was it. Keep in mind, i am an 84 year old woman (gasp !) with fumble fingers. I did it for the cats. Read More... 1 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Screwdrivers
Jary L Port St. Lucie , FL May 16, 2014 Appliance: Whirlpool Undercounter Dishwasher GU2500XTPS1 Broken spring on dishwasher door Replaced both springs while I had the dishwasher pulled out. Read More... 1 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Adjustable Wrench, Pliers, Screwdrivers