Whirlpool Dishwasher Spring Parts

The Door Balance Spring is an OEM part for Whirlpool dishwashers. This part provides tension and balance to the dishwasher door, ensuring it opens and closes smoothly and stays in the desired position when loading or unloading dishes.  

Causes of damage to the door balance spring can include normal wear and tear from frequent use, corrosion due to moisture and detergent exposure, or mechanical failure from excessive force being applied to the door.  

Symptoms of a bad Door Balance Spring include:

• The dishwasher door falling open too quickly or with too much force 
• Difficulty in keeping the door open or having it snap shut unexpectedly 
• A noticeable difference in the effort required to open or close the dishwasher door 

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Detergent Lid Spring is an OEM part for Whirlpool dishwashers. It is responsible for providing the necessary tension to open and close the detergent dispenser lid during the wash cycle. 

Over time, the detergent lid spring can wear out, lose tension, or break due to repeated use, exposure to water and detergent, or accidental mishandling. If the spring becomes faulty, the dispenser lid may not function properly, leading to poor washing results.

Symptoms of a bad detergent lid spring include:

• Detergent dispenser lid not opening during the cycle
• Difficulty in closing the dispenser lid
• Inconsistent or incomplete release of detergent
• Visible damage or wear on the spring

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

For the complete detergent dispenser kit order 4387043.

The Door Spring is an OEM replacement part for Whirlpool dishwashers. It assists in balancing and supporting the door during opening and closing motions. 

Causes of a bad door spring can include metal fatigue from years of compression and extension during cycles. The spring can also become misshaped if over-tightened during maintenance or installation.

Symptoms of a bad door spring for a dishwasher include:  

• Doors that slam shut too forcefully or rapidly
• Difficulty smoothly opening or closing the door  
• An imbalanced feeling when lifting or lowering the door

This OEM Whirlpool part is also compatible with KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, and Roper built-in dishwashers.

The Door Handle Spring is an OEM replacment part for Whirlpool built-in dishwashers. It applies inward tension to assist in opening the dishwasher door after a cycle completes. Proper spring force prevents accidental openings during active washing and rinsing stages.

Symptoms of a failing door handle spring can include: 

• Difficulty opening the dishwasher door at the end of a cycle  
• Potential opening of the door unintentionally during operation
• Sagging or loose door that does not securely latch in closed position

Causes related to the natural fatigue of the coiled wire over thousands of usage cycles. Loss of elastic properties compromises the spring's ability to counteract the weight and seal force of the heavy dishwasher door panel.

This OEM Whirlpool replacement spring restores smooth, convenient door access at appropriate times. Compatible also with some KitchenAid models.

The Actuator Spring is an OEM replacement part for the detergent dispenser system in Whirlpool dishwashers. This small spring is responsible for applying pressure and initiating the process of dispensing detergent at the proper time in the wash cycle.  

Causes of a bad actuator spring soap dispenser can include fatigue from opening and closing thousands of times over the life of the dishwasher. Failure prevents proper dosing of detergent.

Symptoms of a bad actuator spring soap dispenser include:

• Dishes not getting sufficiently clean even with detergent used
• Wet or damp dishes after the cycle ends  
• Built-up residue or food soils still present post-wash
• The detergent cup not opening or closing reliably

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Dishwasher Door Spring is an OEM replacement part for Whirlpool dishwashers. It helps with smooth opening and closing by providing a well-balanced counterforce. 

Causes can involve coils weakening from repeated engagements over time. Metal fatigue diminishes recoil capabilities as well reducing assistive power.

Symptoms of a problematic spring include:

• Sagging or loosely fitting doors
• Difficulty fully opening or closing door
• Noises occurring from unbalanced movement

This is a genuine Whirlpool OEM replacement this part is also compatible with Maytag, Jenn-Air and some Kenmore dishwashers.

Dishwasher door balance spring. Also check the door balance link kit 8194001.

The Control Plate Spring is an OEM part for Whirlpool stand mixers. This spring maintains the proper tension and alignment of the control plate, ensuring the smooth operation and accurate adjustment of the mixer speeds.

Causes of a bad control plate spring can include wear and tear over time, stretching from continuous use, or damage due to overloading the mixer.

Symptoms of a bad control plate spring include:

• Difficulty in adjusting mixer speeds
• Mixer speeds not responding accurately to control adjustments
• Loose or unresponsive control lever
• Unusual noises during speed changes

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This replacement door spring maintains proper tension so the door opens smoothly and doesn't drop. Replace a weakened or broken spring to restore controlled, balanced door movement and everyday usability. What it does:

• Provides tension to balance the door's weight during opening and closing
• Helps prevent the door from slamming open or falling unexpectedly
• Common fix for a door that feels heavy, drops open quickly, or won't hold a mid-position
• Replaces springs that are stretched, fatigued, or broken

• 1 door spring

• Disconnect power before servicing; springs are under tension—use gloves and eye protection
• Note the spring's routing and hook positions; take a photo before removal
• Use pliers to release and attach the spring carefully to avoid sudden release
• Some models use two springs; replace both for even tension if applicable

For Whirlpool made dishwashers. Assembly includes one spring, one retainer and one protective tip. Replace both springs at the same time to prevent uneven load.

This door spring counterbalances the door so it opens smoothly and doesn't drop. Replacing a fatigued or broken spring restores proper door feel and helps protect hinges and related components from excess strain.

• Provides the tension that balances the door during opening and closing
• Helps prevent the door from slamming or falling open too quickly
• Replaces a stretched, weakened, or broken spring
• Common signs: door feels heavy, drops quickly, or sits unevenly side-to-side

• Disconnect power before servicing; for dishwashers, also shut off the water supply
• Support the door and carefully relieve spring tension before removal
• Install the new spring in the same attachment points/orientation as the original
• Replace both together to maintain even tension

Replacement spring kit that restores proper tension and balance to appliance doors and lids, helping them open and close smoothly and stay in position. Use this kit to replace worn or broken springs that cause sagging or noisy operation. What it does:

• Replaces worn or broken door/lid springs to restore proper tension and balance.
• Helps the door or lid open and close smoothly and remain in the desired position.
• Reduces sagging, bouncing, slamming, and related noise caused by failed springs.
• Prevents additional wear on hinges and closures by restoring correct alignment and support.

• Disconnect power (and water, if applicable) before starting any repair; follow all safety instructions in the appliance manual.
• Support the door or lid during removal and installation to avoid pinch or crush injuries.
• Use proper hand protection and tools; keep small fasteners organized to avoid loss.

This replacement spring restores the correct tension in the mechanism it supports so parts move smoothly and return to position as designed. Replacing a fatigued or broken spring helps eliminate slack and prevents accelerated wear on connected components. What it does:

• Provides the return/tension force for the linked assembly
• Helps components travel smoothly and hold their intended position
• A stretched or broken spring can cause sluggish movement, sagging, or failure to return
• Contribute to squeaking, rattling, or snap-back noises during operation

• 1 spring

• Disconnect power and shut off water or gas supplies before servicing
• Note original routing and anchor points; take a reference photo before removal
• Use pliers to control the spring during removal/installation; avoid overstretching
• Inspect anchors, cables, and pivots for wear and replace any damaged parts

This replacement spring restores the correct tension and return action for its connected mechanism so your appliance operates smoothly. Install it to replace a broken or fatigued spring and resolve weak, inconsistent, or non-returning movement. What it does:

• Provides tension so linked parts move and return to their proper position
• Helps keep mechanisms aligned and operating smoothly
• Replaces stretched, broken, or missing springs that cause poor operation
• Common symptoms: part won't return or stay in place, weak/sluggish action, rattling or rubbing noises

• 1 spring

• Disconnect power before servicing; shut off water or gas if applicable
• Note the original spring routing and orientation; take a quick photo before removal
• Control spring tension during removal/installation to avoid snapback; wear cut-resistant gloves and eye protection
• Use suitable pliers/spring tool and inspect adjacent brackets or links for wear while reassembling

Restore smooth, secure door operation with this Door Spring. It provides the hinge tension that counterbalances the door so it opens smoothly and stays properly closed, replacing a broken or fatigued spring to bring back the correct feel.

• Counterbalances the door's weight within the hinge mechanism
• Helps the door close fully and remain closed
• Promotes smooth, controlled opening without dropping or slamming
• Common symptoms: door feels heavy or uneven, drops open, won't stay closed, or a spring appears broken/stretched

• Disconnect power at the breaker and allow the appliance to cool completely before servicing
• Support or remove the door to access the hinge and spring
• Springs are under tension; use caution and eye protection when releasing/installing
• If your model uses two springs, replace both to maintain even tension

This spring kit replaces worn or broken return springs in the applicable assembly, restoring proper tension and smooth movement so the mechanism operates reliably throughout the cycle and returns to its proper position. What it does:

• Provides the correct tension to move or hold parts in place
• Helps resolve weak return action, sticking, failure to engage/latch, or sagging components
• Can reduce noise caused by loose or fatigued springs
• Maintains consistent operation throughout the appliance's cycle

• Manufacturer-supplied spring kit

• Disconnect power; turn off water supply if applicable
• Springs are under tension—use eye protection and release carefully
• Note original spring routing and attachment points before removal
• Replace both for balanced operation