Ian P Orlando , FL May 12, 2015 Appliance: KitchenAid 30" Electric Range Ceran Cooktop Convection Oven KERC506HBS3 Double burner was either off or all the way on no in between temp Removed the knob for the affected burner and screws underneath. Opened the top panel, removed the fluorescent bulb, removed the two screws, and took the top front panel off - it's still attached to wires, so it doesn't go too far. Be careful also that you don't damage the connection between the lights and the red plastic pieces on the front. Infinity switch was dangling since the screws to the front plate were removed. One wire at a time, I switched the wire from the old switch to the corresponding position on the new switch using needlenose pliers. Then I put the cover out of the way and tested it before putting it all back together. Read More... 2 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Pliers, Screwdrivers
Larry W Ephrata , PA June 05, 2016 Appliance: KitchenAid Electric Range KERC507HBT1 Front burner stayed on high control did nothing Ordered new infinite switch and changed it out works like a charm. videos were helpful made project simple Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Screwdrivers
Timothy W Bonifay , FL November 04, 2018 Appliance: KitchenAid 30" Electric Range Ceran Cooktop Convection Oven KERC506HBS3 Infinite switch on large range burner I couldn't find a video that matched my KitchenAid model KERC506HBS3, but after taking way too many screws out of the back panel, I finally realized I had to go in through the top. It was a little more of a job than I anticipated, but even with neuropathic fingers I was able to get it back together and working. I only had 4 too many screws left from the back panel when I got through. You will need a square head bit to release the side panels from the back panel so you can break off the plastic sides of the control panel. Don't worry about them being broken. The side panels will hold them in place and your range probably won't last that much longer anyway. Read More... Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Screwdrivers
Nancy G Belleville , IL July 06, 2019 Appliance: Model GR450LXHQ2. WHIRLPOOL RANGE Dual burner need control replaced Ordered a new control from Appliancepartspros and it only took us 15 min to replace it. Easy peas. Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Screwdrivers