Brandi H Killeen , TX September 01, 2017 Dryer wouldn't start every time and and would shut off by itself. We called appliance repair he instantly knew the issue and encouraged us to replace the timer. Read More... 53 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Socket Set
Casey H Piqua , OH January 08, 2017 Appliance: Maytag Electric Dryer MEDC200XW1 Dryer would not heat all the time After checking through all the thermals and they checked normal, I Figured I'd try the timer seeing how the heating element looked and checked good along with the thermals. I would turn the dial to high heat and it wouldnt heat. I'd turn the dial again and I'd get heat for about 2 minutes. I went to Applancepartspro.com (since I've bought from them before), I typed in my modle number on my dryer, found the part on the parts diagram and bought it. It's showed up in about 2 days. I pulled the old timer out, compaired the 2, they were Identical, put everything back together, and had heat on every cycle that needed it. My wife was so excited to have her dryer back. Happy wife Happy life. Read More... 12 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Screwdrivers, Wrench Set
Daniel C Ladson , SC November 24, 2016 Appliance: Model PART # W10894766, MAYTAG CENTENNIAL DRYER Dryer would only work on one of three cycles I checked all the thermostats, sensors and fuses for continuity. All checked out fine. Only thing left was timer, ordered it, came in a day and a half, took 5 minutes to install, bam! Fixed! Read More... 7 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Nut Drivers
Steven E Carmi , IL February 14, 2017 My clothes weren't drying. I checked all the fuses the heat element and the timer was last. I could get it to work by putting something behind the knob to get by. A new timer. Read More... 1 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Screwdrivers
John C Evergreen , CO July 12, 2020 Appliance: Maytag Electric Dryer MEDC200XW1 Dryer only worked in low heat mode and took very long to dry clothes, was a 9 year old dryer that did not have error codes I read the tutorials for recommended fixes and thought the problem was a partially bad heater element, but I talked with one of the technicians there who thought that it might be the timer and gave me a test to perform to see if the timer was bad. The result was that the timer was bad. Got the part the next day and it took about 15 minutes to install and now dryer is working great. I was very pleased with the help and the part. Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Nut Drivers, Screwdrivers