White Outdoor Axle, Roller, Shaft, Wheel

This front roller is used as a replacement part on lawnmowers from major lawn and garden manufacturers. It attaches to the lawn mower's front deck to keep the mower level with the surface of the yard. If the roller is damaged or missing, the lawnmower deck will be unlevel, which can cause various problems. If the front roller is too low, the mower can scalp the lawn leaving bare spots. These spots will turn brown and have to be reseeded to restore the grass. If the front is too high, the grass will be cut unevenly.If the lawnmower is cutting but not cutting evenly or is leaving bald areas, the front roller should be inspected and replaced as needed. Normal wear and tear may have loosened it, or it may be damaged from hitting rocks and sticks in the yard. Replacement is simple and can normally be completed in less than half an hour. Make sure the lawnmower is cool and parked on a level surface. Pliers are needed to remove and replace the roller.This front roller is a genuine OEM part sourced directly from the manufacturer. It is sold as an individual unit. The front roller is made compatible with lawnmowers manufactured by Cub Cadet, Huskee, MTD, and Troy-Bilt.

This part is a replacement wheel assembly. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. If the current wheel assembly is broken or defective, this part can be used as a replacement. It is intended for use with lawn mowers and chipper/shredders.The wheel assembly is a high wear and tear part that may need to be replaced during the natural lifespan of the equipment. Wheels that are bent, dented, broken, or otherwise damaged can prevent the user from properly maneuvering the equipment. When working on or near an engine, always ensure that the equipment is powered off and completely cooled down before attempting to undergo any repairs. For more accurate information on how and where to install this wheel assembly, the appropriate owner's manual and equipment diagrams should be referenced. This wheel assembly is suitable for use on a variety of lawnmower and chipper/shredder models manufactured by MTD, Craftsman, Yard Machines, Cub Cadet, and Husky. It is a genuine OEM part and thus is made of high-quality, durable materials. Part sold individually.

This genuine replacement part is a 9 x 2 inch MTD wheel complete assembly. This part is for use with walk-behind self-propelled lawn mowers. This complete wheel features link tread to provide better grip. This wheel assembly is the rear wheel, and attaches to the bottom of the mower to allow for good grip and smooth rolling, even on uneven ground. Over time, the wheels on a lawn mower can wear out or become damaged. This can reduce traction or affect the alignment of the mower. Replacing the wheel assembly is simple, but be sure to shut off the engine of the mower. Allow the engine to become cool before installing this part. Disconnect the spark plug to prevent the mower from accidentally starting. This OEM replacement part is made of high quality plastic, and is sourced directly from the manufacturer. This part is sold individually. This part is compatible with a variety of Craftsman, Cub Cadet, Yard Machines and MTD lawn mowers.Please note: original part numbers 734-1836, 734-1837, 734-1838, 734-1981, 734-1850 are now obsolete, and manufacturer has replaced the original part numbers with this part.

This wheel is a replacement part that can work for several types of lawn and garden equipment. The rear wheels enable users to maneuver their machines easily. If there is damage to one or more of the wheels, it will be difficult, and in some cases impossible, to use the machine properly and safely.Wheels on lawn and garden machines are constantly exposed to the elements. Despite their durability, they can start to wear down over time. Additionally, there is the chance that the wheel could break if it hits rocks, ice, or other debris. If a wheel is damaged, it should be replaced as soon as possible. The replacement process is simple. It is a good idea to replace both rear wheels at the same time.This wheel is a genuine OEM replacement part and is sold individually. Those who need to replace both wheels will need to buy two. The wheels will work with certain models of snowblower and lawnmowers from Yard Machines, Cub Cadet, MTD, and Craftsman.

This is a complete wheel assembly for walk-behind and push lawnmowers. It is a single replacement wheel for the front wheels on a mower. Wheels may be damaged by impact with hard objects or from exposure to the elements over time. When the wheel is visibly damaged or otherwise does not roll as well as it should, it should be replaced.If the user is having difficulty pushing the walk-behind lawn mower, a visual inspection of the wheels will determine if a new part is required. Replacing a wheel on a lawn mower is simple. Tools including a socket set, pliers, and a screwdriver may be necessary to perform the repair.This wheel is a genuine OEM replacement part. It is compatible with MTD, Troy-Bilt, and Yard-Man machines. It is sold as an individual unit. The wheel is made of durable plastic.

This listing is for an MTD left-hand lawnmower axle. The axle is a vital component in regard to the steering and movement of a lawnmower. The left-hand axle is also known as the left handle spindle or wheel spindle. These components attach to the wheel of the lawnmower, allowing the drive system to turn the wheel. A damaged axle can seriously affect the lawnmower's ability to move freely. When an axle becomes damaged, the wheels could have issues moving efficiently. If the problem persists, it's possible that the wheel could become permanently disconnected. Begin the installation by turning the mower on its back. Use a flat head screwdriver to pry the axle free from the retaining tabs. Unthread the mounting bolts securing the front axle cover. Unthread the bolts securing the wheel adjustment plate. Repeat these steps in reverse to install the new component.The axle is a genuine OEM replacement part sourced directly from MTD. This component is only available individually and is not included with any other components. This part is compatible with MTD, Troy Bilt, and Cub Cadet lawnmowers.

The wheels of a lawnmower and other lawn care equipment take a lot of abuse, even on well cared for machines. They can wear down over time, making it difficult to maneuver the equipment. Eventually, it may be necessary to replace the wheels if they are no longer rolling properly or if they have cracked. This wheel is eight inches in diameter and is easy to replace in just a few minutes. This OEM replacement wheel is sold individually and is compatible with many different types of lawn and garden equipment. These include lawnmowers, snowblowers, tillers, edgers, and log splitters. The wheels work with a range of brands, including Craftsman, Mastercut, Montgomery Wards, Sears, Bolens, MTD, Yard Machines, and Cub Cadet. Keep in mind that this is an individual wheel, so be sure to get as many as needed for the equipment.

This part is a replacement shifter assembly. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can be used to replace a damaged or faulty shifter assembly in a variety of tiller models. The shifter assembly is what enables the tiller to shift gears. This part is essential to proper functionality and maneuverability of the equipment, and thus should be replaced if damaged or defective. To replace this part, proper tools are required, including pliers, a socket set, a screwdriver, and a wrench. It is always recommended that the appropriate safety precautions are adhered to when attempting to fix any power tools or machinery. For more accurate information on how and where to install this shifter assembly, the appropriate owner's manual and included diagrams should be referenced.As an authentic replacement part, this shifter assembly is suitable for use on several different models of tillers manufactured by MTD, Yard Machines, and Husky. This is a genuine part made of high-quality, durable materials and is sold individually.