White Outdoor Blade

A mulching blade has a unique curved or angled design that allows discharging, bagging, and mulching. If its edges are already dull, it can lead to longer mowing time and frayed and torn grass blades. Mulching blade installation is easy. First, unplug the spark plug wire. Then, position the lawnmower on its side. Get a woodblock, preferably 6 x 2 in size, and put it between the old blade and housing deck. Make sure that the wood will prevent the old blade from moving. Take a socket wrench and remove the blade’s nut and washer. Remove the old blade and put the new mulching blade in. Put the nut and washer back and tighten until it is secured. You can use the woodblock to prevent the replacement blade from moving when it is tightened. This mulching blade replacement s an original MTD product. This OEM mulching blade can be used for MTD, Craftsman, Cub Cadet, Murray, Yard-Man, and Bolens lawnmower models. This brand-new mulching blade is sold individually. The support blade and screw hex are sold separately.

This blade adapter is made to attach a lawn mower cutting blade to the drive shaft of a push mower. Though it is made of sturdy metal and is tightly fastened to the mower's drive, the adapter and blade may wear and loosen over time. This can present a dangerous situation as well as poor cutting performance for the blade. Also, each adapter has a small insert tab that fits into the blade attachment. This tab, called a “key,” is actually a shear pin. Should the blade strike a solid object, the key will sheer off, preventing the blade from coming loose or suffering irreparable damage. The solution to either of these problems is to replace the blade adapter. The blade itself should be closely examined to make sure it fits the new adapter with no wobble or slack. To replace the blade adapter, turn the mower on its side with the air filter on top. Use a ratchet to remove the bolt that attaches the blade and adapter to the drive shaft. Make certain to fit the new adapter key into the keyway on the shaft. Always use a replacement part like this one, that is OEM certified to be identical to the original. This blade adapter is compatible with Ryobi, Yard Machines, Yard Man, Huskee, Cub Cadet, Troy-Bilt, MTD, and Bolens mowers.

These quality tiller tines are used on a variety of yard tillers. Tiller tines are blades attached to the tiller that turn soil and prep it for cultivating a garden. As the tiller tines are used, they can become worn down, broken, or damaged through use or impact with rocks and other debris. These are C-shaped tines that can cut through dense soil.If the tiller tines are bent, dull, or damaged, they will need to be replaced, otherwise they might till the soil unevenly and may not reach the depth required. To replace the tines, remove the spark plug wire before taking off the tine shield end cover. Taking out the tines requires removing the cotter pin from the clevis pin so the clevis pin can be pulled out. Next, the tines can be pulled directly off of the shaft. Slide on the new tines and reinstall the clevis and cotter pins before using the tiller again.These tiller tines are an authentic OEM replacement part directly sourced from the manufacturer. It is sold as an individual part. The tines are compatible with tillers manufactured by MasterCut, Craftsman, Yard-Man, Cub Cadet, Bolens, Yard Machines, MTD, Huskee, and Montgomery Wards.

This replacement blade is a genuine MTD part for select models of edgers. The edger blade is responsible for cutting the weeds and grass from the edges of concrete, landscaping, and other elements. Over time and with regular use, blades can become dull or damaged. They also contact the ground regularly, which can lead to dents or other damage. In the event that the edger blade is damaged or warped in any fashion, it should be replaced immediately for safe operation of the machine. This replacement part provides an exact fit for compatible units. This genuine edger blade from MTD is compatible with multiple units, including hundreds of models from Troy-Bilt, MTD, Yard Machines, Yard Man, Husky, and Bolens. This model has a 5/8” center hole for attaching the blade nut to secure the blade. Always wear gloves when replacing edger blades and be sure to disable the engine for added safety. This repair will require a wrench or socket set to remove the blade nut and replace it once the blade is changed. This blade is sold as a single unit and comes un-sharpened.

The tri-cut blade works to replace edger blades to ensure they are sharp and capable of cutting through the grass and turf properly. The blade is made from metal and can provide users with clean edging around the edges of their lawn and around flower beds. Regularly examine the edger blade regularly to ensure that it is not bent, broken, or otherwise damaged. If your current edger blade is no longer sharp and cannot be sharpened, it is time for a replacement. Without a sharp blade for the edger, it will be impossible to take care of the lawn properly. To replace the blade in your edger, the only tool required is a wrench. Replacing the blade is easy, and it should not take more than 15 minutes. This OEM part is sold individually, and it works with edgers from a range of brands, including Craftsman, Yard Machines, MTD, Troy-Bilt, Bolens, and Yard-Man.

A blade is the part of chippers and shredders that cuts the grass. It spins rapidly and pulls the grass up before cutting it. The grass is sucked into the deck, where the clippings continue to get chopped into smaller pieces before getting expelled. With regular use of the blade, after accidental damage, or because of the age of the machine, the blade may cease to perform adequately. Running the lawn equipment over rocks or other solid obstacles may also cause the blade to break. In any case, the blade has to be removed, and a new blade should be installed. Wear gloves for protection and handle the blade with caution. Make sure the machine is cooled entirely before beginning the repair.This blade is a genuine OEM part sourced directly from the manufacturer. It is made of durable, high-quality metal. The blade is sold as an individual unit. The replacement part is compatible with MTD, Troy-Bilt, Yard Machines, and Huskee brand lawn and garden machines, including chippers and shredders.

This left-hand inner tines assembly sit next to the outer tines on the left side of tillers from a variety of major manufacturers. The tines are the part of the equipment that breaks up the soil to create a garden and allow cultivation. The part is made of strong metal, but over time it can start to wear down or break when running over large rocks or other items.If the tines are broken or have been worn down, they will need to be replaced. Tines that are worn will not dig into the earth as well as new tines. A hammer and a set of pliers are required to make the replacement. Remove the tines from the tiller after turning it off and taking out the spark plug wire. The new tines can be installed in the same place.These inner tines are made to be used with tillers created by MasterCut, Yard-Man, Bolens, Montgomery Wards, Huskee, MTD, Yard Machines, Cub Cadet, and Craftsman. It is sold as an individual part. This is a genuine OEM replacement part that is sourced directly from the manufacturer.

These outer tines are used on lawn equipment to help dig up the earth for gardening or other purposes. They are made of durable metal but may wear down after being used. The tines can also crack or break in some cases. When the tines have worn down or become damaged, they will need to be replaced.Take a look at each set of tines on the tiller to see how much they have worn down since being purchased. If they are half the size they were when new, they need to be replaced. The process of replacing the tines is simple and requires nothing more than work gloves and pliers. Use the pliers to remove the outer tines from the tiller so they can be removed. Install the new tines with the pins and the equipment will be ready to use.These outer tines are a genuine OEM replacement part that are directly sourced from the manufacturer. The tines are sold individually. They are made for use with tillers manufactured by MasterCut, Yard-Man, Bolens, Montgomery Wards, Huskee, MTD, Yard Machines, Cub Cadet, and Craftsman.

This lawn mower outer tine assembly is for lawnmowers. Tines are used for dethatching the lawn, which can be useful in the spring. The outer tine is attached to the inner tine.Tines may become damaged with regular use or sudden impact, as with hitting rocks or cement. Damage might present itself as chips in the metal, bending, or a full break. A damaged tine should be replaced right away. Otherwise, the equipment will not function properly and could be dangerous. A screwdriver or a pair of pliers will be needed to properly install the new tine.The metal outer tine assembly works as a replacement part for many brands of lawnmowers. Compatible brands include MTD, Yard Machines, Bolens, Yard-Man, Cub Cadet, Husky, and Troy-Bilt. The OEM part is sourced directly from the manufacturer and is sold as an individual replacement.

This blade adapter has a 25mm inner diameter and fits onto the blade of a variety of lawnmowers. The blade adapter allows the blade to connect to the spindle for proper performance. This blade adapter is made of metal. Regular wear and tear can cause the blade adapter to go bad or even split in half. When this happens, the blade adapter will need to be replaced.Before replacing the blade adapter, the lawnmower should be turned off and the spark plug wire needs to be disconnected. Turn the mower upside down to get access to the component. Use a socket set to remove the old blade adapter and replace it with the new component. Replace any other components, connect the spark plug wire, and test the machine before use. This component is sold on an individual basis. It is an authentic OEM replacement part that is directly sourced from the manufacturer. The blade adapter is made to be used with lawnmowers manufactured by MasterCut, Craftsman, Yard-Man, Cub Cadet, MTD, Troy-Bilt, and Yard Machines.

This is a chipper blade, which is installed on wood chippers and is used for cutting up pieces of wood into small chunks. Chipper blades need to be sharpened at least once a year or after about 25 hours of use. If the chipper blades aren't maintained, they will become dull and won't provide the required level of cutting power needed for wood chippers. If wood chips from the chipper are uneven, shredded, or rough, then sharpening or replacement may be needed. Make sure to take out the spark plug before the hopper is removed and connected to the tool. Next, remove the housing around the blades and the rotor assembly. The bolts around the blades can be taken off using an Allen wrench. Remove the blades, but be sure that work gloves are used to prevent injury. The replacement blade can be installed at this time. This is an OEM replacement chipper blade that can be used on wood chippers from Craftsman, MasterCut, Cub Cadet, Yard-Man, Yard Machines, and MTD. It's sold individually and comes directly from the manufacturer. The replacement will require an Allen wrench set, a wrench set, a socket set, and pliers.