White Outdoor Blade

This is a chipper blade, which is installed on wood chippers and is used for cutting up pieces of wood into small chunks. Chipper blades need to be sharpened at least once a year or after about 25 hours of use. If the chipper blades aren't maintained, they will become dull and won't provide the required level of cutting power needed for wood chippers. If wood chips from the chipper are uneven, shredded, or rough, then sharpening or replacement may be needed. Make sure to take out the spark plug before the hopper is removed and connected to the tool. Next, remove the housing around the blades and the rotor assembly. The bolts around the blades can be taken off using an Allen wrench. Remove the blades, but be sure that work gloves are used to prevent injury. The replacement blade can be installed at this time. This is an OEM replacement chipper blade that can be used on wood chippers from Craftsman, MasterCut, Cub Cadet, Yard-Man, Yard Machines, and MTD. It's sold individually and comes directly from the manufacturer. The replacement will require an Allen wrench set, a wrench set, a socket set, and pliers.

This scraper blade is an authentic OEM replacement part for a snowblower. Snowblowers operate using an auger that scoops up the snow and blows it to a different location. However, an auger cannot gather all of the snow because it would have to scrape against the ground. Scraping that auger against the ground would damage its blades and make them unusable. Instead, this scraper blade drags against the ground and collects any remaining snow so that the auger blades can remain protected. Scraper blades can be damaged if the snowblower goes over rocky terrain. Although it is nearly impossible for a blade to snap completely off a blower, the blade will leave the snow behind, making the blower less effective if chipped or dented. To replace a scraper blade, simply use a socket wrench to unbolt the blade from the auger housing. Be sure not to lose the bolts as they will be needed for reassembly. This part is compatible with Craftsman, MTD, Cub Cadet, Ryobi, Huskee, Yard Man, and Yard Machines snowblowers and is sourced from the original manufacturer. This part is a high-quality replacement part. It does not ship with additional hardware.

This blade adapter kit secures the blade of the lawnmower to the spindle shaft. It's used on walk-behind lawnmowers and is made of durable metal. The kit is sold as an individual item but comes with the blade bolt, the adapter, and the bell blade support. Over time, these parts can wear out or become damaged and will require replacement.The only tool needed for the replacement is a socket set. Remove the spark plug wire and hold the blade while wearing gloves. Take off the blade bolt and support, followed by the blade. Attach the new parts to the lawnmower and reassemble the other components.This is a genuine OEM replacement part that is sourced directly from the manufacturer. The blade adapter kit is sold as an individual component. It is made for use with lawnmowers manufactured by Craftsman, Cub Cadet, Troy-Bilt, Yard Machines, MTD, Huskee, Montgomery Wards, Bolen, Yard-Man, and MasterCut.

This genuine MTD shredder screen determines the size of the shreds that the wood chipper will produce. A shredder screen covers any number of shapes and sizes of screens through which the wood will be chipped.A shredder screen might have to be replaced in the event that it suffers damage over time or in the case that the wood chipper encounters wood that is too hard or too brittle, which can break the shredder screen. The bars of a shredder screen can be welded back into shape by hand, but it is easier and safer to order a replacement shredder screen if it is subject to breaking, piercing, puncturing, or erosion to the metal material. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This shredder screen is compatible with the following brands: MTD, Cub Cadet, Yard Machines, Yard-Man, Craftsman, and Troy-Bilt. This part is sold individually.

This genuine MTD shave plate, also known as a scraper bar, can be used as a replacement part for snowblowers. The shave plate is located at the bottom of the auger to scrape snow off of surfaces and filter it into the auger of the snowblower.Damage to the shave plate might include cracks, dents, and erosion to the metal material, or it can gradually wear out and no longer be effective. Evidence of a cracked shave plate can come from a visual inspection, but it can also be detected if the snowblower is doing a poor job of collecting and scraping snow off of surfaces. A cracked shave plate should be removed and replaced immediately, and a snowblower should not be used before the part is replaced. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This shave plate is compatible with the following brands: MTD, Yard Machines, Cub Cadet, Yard Man, and Craftsman. Part sold individually.

This replacement part is a tine assembly. It is a genuine replacement part made by MTD. This part is usually found in riding lawn mowers and helps the blades turn when cutting grass, similar to a spindle assembly. A new tine assembly might be needed if the user notices that the rotating mechanism in the lawnmower is not working as smoothly as during prior uses. This can be because is it possible that the tine can become stripped over time and cause the rotation to become rigid. Be sure the engine is completely powered off before attempting to replace this part. Refer to the proper user manual for more information regarding how to replace this part. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer to ensure long-lasting use.

This chipper blade is an authentic OEM replacement part sourced directly from the manufacturer for use in chipper shredders. The blade is the workhorse of the machine, chopping the limbs and sticks into tiny particles as they pass through the machine. As the machine is used, the blades will become dull and need sharpened. Eventually, the blades may develop cracks or become so worn that they need to be replaced for the chipper to function efficiently. Chipper blades should be periodically inspected.Wear safety gear and remove the chipper's spark plug before working on the blades. Remove the bolts holding the hopper in place and set the bolts and hopper aside. Remove the housing protecting the rotor assembly and chipper blades. Remove the bolts holding the chipper blades in place. Discard the old blades. Install the new blades and reassemble the chipper. Put the spark plug back in and test the blades.This chipper blade is made of heavy-duty metal and is sold as an individual part. It does not include connecting bolts. This blade is designed for use in chippers manufactured by MTD and Troy-Bilt.

This is a chipper impeller assembly that can be used with a range of chippers and chipper-shredders. The impeller is the part of the chipper that rotates, and it is what allows for the chipping or shredding to take place. It will shred leaves, yard waste, and tree limbs. If there is an issue with the chipper impeller, it will reduce the efficiency of the machine. In some cases, it might not work at all. One of the signs that the impeller has problems is that it is turning slowly. It might also make a lot of noise.The impeller is a durable piece, but it does a lot of work. This means it is subject to wear and tear. Over time, it might become worn out or damaged, which will require a replacement. This replacement could be done by the owner. However, they need to remove the spark plug wire first and wear gloves to keep their hands safe.The chipper impeller assembly works for select machines from MTD, Troy-Bilt, Husky, and Yard Machines. This is a genuine OEM replacement part sourced from the manufacturer, and it is sold individually.