White Outdoor Chore Performer

Small metal washer that installs with screws and bolts throughout lawn mowers and outdoor power equipment. Replace if cracked, worn, or missing.

This is a genuine replacement OEM throttle control cable. The throttle control cable is comprised of an internal wire that slides through the external housing. Force is transferred from the accelerator pedal to the control linkage mounted to the throttle body from this sliding movement. If constant speed is not being maintained from the cruise control or delays starting, stopping, or jerking, then it may be time to replace the throttle control. To replace the throttle control a pair of pliers is needed. Remove the cable housing using pliers. The housings will swivel off the base and slide down the cable. Next, thread the cable wire through the housing. Locate the wire base on the back of the engine and run the cable through the throttle base and throttle arm. With the throttle all the way down, slide the cable through the housing and into the handle unit to attach it to the throttle handle. Pull the cable with a pair of pliers to make it tight and turn the lock screw. Replace the throttle to test the tension. If the mower, edger, or trimmer is running too high then loosen the cable.This throttle control works with lawn mowers, edgers, and trimmers. This is an OEM part sourced directly from the manufacturer and sold individually.

This is a control cable designed for use with a string trimmer. The cable transmits operator input from the handle to the engine or cutting head, typically controlling throttle or engagement functions. Replace this cable if the trimmer does not respond to handle controls, the cable is frayed, kinked, or broken, or if the trimmer head fails to engage or disengage properly.

This is a metal connecting rod that attaches the rear debris guard to the tiller frame, keeping the guard properly positioned during operation. It ensures the guard stays in place to deflect dirt and debris kicked up by the tines. Replace this rod if it is bent, broken, or missing, which can cause the rear guard to hang loosely or fall off during use.

This replacement part is a pinion drive. It is a genuine replacement part made by MTD. This part is typically found in chainsaws and helps the spinning and turning mechanism of the chain to operate properly while in use. A new pinion drive might be needed if the user notices that the chain in the chainsaw is not rotating properly. This can be due to a stripped pinion drive and the problem should be fixed once the part is replaced. It is common that this happens after years of normal wear and tear. Be sure to wear work gloves as the user will be working close to the blades in the chainsaw. Refer to the user manual for more detailed information on this part. This pinion drive is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer to ensure proper fit.

This drive pulley is a genuine MTD part, sold individually. This drive pulley can be used as a replacement part in a snowblower or an edger. This part is used in conjunction with the drive belt to move the appliance.The drive pulley in a snowblower or an edger might have to be ordered as a complete replacement part in a drive pulley that can no longer generate rotation in the wheels of the appliance. This could occur if the drive pulley has suffered damage from general wear and tear with long-term use or as the result of a collision with a hard object such as a rock or a curb.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This drive pulley is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Troy-Bilt, Yard Machines, Montgomery Wards, Yard Man, and MasterCut.

Engine pulley for gas line trimmers and wheeled trimmers. Mounts to engine shaft to drive belts. Replace if cracked, worn grooves, or missing.

This replacement part is a shredder blade. This is a genuine replacement part made by MTD. This blade is commonly found in lawn mowers and is used to shred grass effectively and smoothly during use. A new shredder blade might be needed if the machine is no longer shredding grass or mulch as effectively. If the blade has been used for a while, it is possible that it has become dulled down over time. If this is the case, it is recommended that the blade be replaced to return the appliance to working order. Wear work gloves when replacing this part as the blade is sharp. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.

Torsion spring for chipper shredders. Produces torque to keep internal parts running smoothly. Replace if snapped, broken, or weakened from pressure.

This replacement part is a bushing washer. This is a genuine replacement part made by MTD. Washers work with other small parts like nuts and screws to hold certain pieces in place. This allows for the engine to run smoothly and efficiently. A new bushing washer might be needed if the current one is missing or damaged in any way. This can include being dented, bent, or cracked. Washers can become worn down due to normal wear and tear over time. This is caused by friction inside of the engine. Refer to the user manual for more specific instructions on how to replace this part. This bushing washer is also a genuine OEM replacement part to ensure proper fit. This part is sold individually and is sourced directly from the manufacturer for long-lasting use.

This is a genuine adjustment lever assembly that is made for use in select models of edgers. The adjustment lever assembly is a durable metal part that is designed to help adjust the height of the unit. This part is used frequently and it can be subject to damage from repetitive motion or other impacts. It could also become dented or otherwise broken, necessitating a repair or replacement. Typically, this OEM adjustment lever assembly is going to resolve the issue by offering an exact replacement. It is compatible with machines from MTD, Troy-Bilt, Yard Man, and Cub Cadet and will have different applications depending on the appliance in question. Owners should refer to the parts diagram for exact placement when replacing this lever assembly. This part will require a screwdriver and a wrench set to replace. It will be important to disconnect the power and wear gloves in order to perform this repair. Always allow the unit to cool before performing any work, as well. This assembly is sold individually and does not include hardware or additional components.

This replacement part is a casing clamp. It is a genuine replacement part made by MTD. This part is typically used to secure the governor control plate to the tank assembly.A new casing clamp might be needed if the current one is damaged or missing. Be sure the machine is stationary and the engine is completely powered down before beginning this repair. This part is made of durable metal so that it works properly with the machine at hand. Refer to the owner's guide for more information on this part. This air cleaner is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer to ensure a proper fit.

Replace a broken or worn input shaft assembly causing power transmission issues in your tiller. Restores proper drive function. Moderate repair difficulty.

Replacement door assembly for chipper shredders. Installs on the main body to provide access and containment. Order when original is cracked or missing.