White Outdoor Log Splitter Parts

This flexible coupling is a genuine MTD part, sold individually. This flexible coupling can be used as a replacement part for a log splitter or a chipper shredder. The purpose of the flexible coupling is to carry on the power transmission between multiple shafts. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This flexible coupling is compatible with the following outdoor appliance brands: MTD, Cub Cadet, Yard Machines, and Yard Man.

Log splitter not building pressure or splitting slowly? This hydraulic gear pump restores splitting force. Moderate difficulty repair for experienced DIYers.

Hydraulic pump coupler for log splitters. Connects the drive shaft to the hydraulic pump. Replace if cracked, stripped, or worn to restore proper operation.

Fix sluggish or inconsistent splitting action with this log splitter control valve. Regulates hydraulic cylinder movement for smooth operation.

This is a simple extension spring with an outside diameter of 0.38 and a slack length of 2.5. It is primarily used as an extension spring for snowblowers, but may be compatible with other lawn equipment. It’s designed to apply tension as the throttle is applied. The more gas there is, the more resistance will be present. Under most circumstances, replacement is easy. When the spring breaks or gets rusty, look at both points of attachment. Memorize where it’s attached, or take a picture, and remove the old spring using a pair of pliers if necessary. Install the new spring and the tool is ready to use. This is an OEM part sourced directly from MTD, and it is sold individually. It’s black in color and was initially designed for Troy-Bilt lawnmowers. However, because this is a versatile part, it has since been repurposed for a number of MTD and related machines in other brands. These include lawn tractors and snowblowers, as well as lawnmowers, in brands such as Ryobi, Yard Machines, Husky, and Cub Cadet.

Tubeless air valve for lawn tractor and mower tires. Replace when cracked, leaking, or damaged during tire changes. Installs in wheel rim for proper inflation.

Replacement washer for lawn mowers and outdoor power equipment. Installs with bolts to distribute load and prevent loosening. Replace if worn or missing.

This ball bearing assembly has a wide variety of uses in a number of gasoline-powered yard tools. Bearings are used to provide smooth, friction-free motion between the rotating parts of equipment where pieces fit together and move. The weight and momentum of the rotating motion are distributed to the ball bearings, which prevents wear on the equipment and allows smooth, repetitive motion. Ball bearings are used in equipment such as tillers and lawn tractors, as well as other power equipment that is self-propelled. The bearings will wear out over time since they are on the receiving end of all the angular momentum of the equipment being used. One of the chief locations where bearing assemblies need to be replaced are the drive wheels of the riding mowers and lawn tractors. The bearings are located in brass housings specifically machined to hold them. Since it can be difficult to remove the old ball bearing assemblies from these housings, it is worth considering simply replacing the entire housing as well as the bearing. These bearings are genuine OEM manufactured replacement parts. They are compatible with MTD, Yard-Man, Troy-Bilt, Husky, Cub Cadet, and Yard Machine lawn tools.

Mandrel bearing for riding mowers and lawn tractors. Replace if spindle makes noise or blade wobbles. Ensures smooth blade rotation. Verify fit by model.

This is a bushing made from black plastic with a cleft down the middle to provide enough flex for easy insertion. It has a flanged design, which means it won’t easily pop out after installation, even under stress from constant vibration. The bushing’s primary purpose is to protect wires and cables from damage as they pass through a channel. As such, the material is fairly durable and does not need to be replaced under ordinary circumstances. That said, there are some situations in which it can become damaged. For one thing, it’s easy to damage while repairing the wires or cables that run through the bushing. If the bushing does need to be replaced, it requires disconnecting any cables or wires that run through the bushing. Pop out the old bushing with a rubber mallet, install the new bushing the same way, reconnect the wires, and the repair is complete. This is an OEM part sourced directly from MTD, and it is sold individually. It was initially used on snowblowers but has also been used on lawnmowers and lawn tractors.

Here is a replacement control handle assembly for use with chippers and similar machines. The assembly is the part of the machine that allows the user to control the function of the machine. Control handles tend to be well-made and durable, and they can last a long time on the machines. However, owners may find that they will eventually need to replace the handle assembly. The handle could break, there could be corrosion or a break on the lever, or one of the connecting pieces, such as a pin, could become lost or broken. When dealing with a problematic control handle assembly, it is often a good idea to replace the entire assembly, not just a piece of it. This is a genuine OEM replacement control handle assembly for log splitters and wood chippers. The control handle assembly is sold individually, but it does contain the parts that are needed to replace and affix the handle to the machine. The part can work with more than 150 different machines, and it is compatible with Cub Cadet, Yard Machines, MTD, MasterCut, and Yard-Man.

Thumb screw that secures the air cleaner assembly on lawn mower and small engines. Replace if damaged, stripped, or missing due to vibration.

Rope won't retract or gets stuck when pulling? This recoil starter spring restores smooth pull-and-retract action on walk-behind mowers and tillers.

Governor return spring for small engines on lawn mowers, tillers, and outdoor power equipment. Replace if broken, stretched, or missing. Installs on engine.

Air cleaner housing shields your engine from dirt and debris. Replace if cracked or damaged to maintain proper filtration. Verify fit with your model number.