White Outdoor Tractor

Fix uneven wheels or steering issues with this lawn tractor right axle assembly. Resolves damaged axle problems on front-engine and garden tractors.

Lawn tractor pulling to one side or wheels misaligned? This front axle ensures proper wheel positioning and straight steering on riding mowers.

This axle assembly is a genuine MTD part, sold individually. This axle assembly can be used as a replacement part for a lawn mower. The purpose of the axle assembly is to affix the wheels the appliance and to create an adjustable height mechanism for the deck of the appliance.The axle assembly might have to be replaced if it has been damaged or is malfunctioning to the point that it cannot perform its dual function. If any of the components loosen over time or if the axle assembly is punctured, scraped, cracked, or otherwise damaged, the axle assembly should be removed and replaced by this genuine OEM replacement part. It is a simple replacement that will require only basic tools. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This is an OEM part sourced directly from the manufacturer. It is sold individually. This axle assembly is compatible with the following outdoor appliance brands: MTD, Craftsman, troy-Bilt, Yard Machines, Murray, Yard Man, MasterCut, and Huskee.

Replace your lawn tractor's blade spindle shaft if blades won't engage, spin unevenly, or make grinding noises. Bearings sold separately. DIY-friendly repair.

Blade won't spin or spins unevenly? This spindle shaft connects your mower blade to the drive system. Replace if worn or corroded for proper cutting.

Needle bearing for lawn tractors and mowers. Replace when you notice unusual noise, vibration, or rough movement. Confirm fit with your model number.

Flange bearing for lawn tractors and walk-behind mowers. Replace when you notice excessive noise, wobbling, or difficulty with blade rotation. Verify fit with your model number before ordering.

Flange bearing for lawn tractors and walk-behind mowers. Replace if you notice excessive noise, vibration, or wheel wobble. Verify fit with your model number.

This is a bushing made from black plastic with a cleft down the middle to provide enough flex for easy insertion. It has a flanged design, which means it won’t easily pop out after installation, even under stress from constant vibration. The bushing’s primary purpose is to protect wires and cables from damage as they pass through a channel. As such, the material is fairly durable and does not need to be replaced under ordinary circumstances. That said, there are some situations in which it can become damaged. For one thing, it’s easy to damage while repairing the wires or cables that run through the bushing. If the bushing does need to be replaced, it requires disconnecting any cables or wires that run through the bushing. Pop out the old bushing with a rubber mallet, install the new bushing the same way, reconnect the wires, and the repair is complete. This is an OEM part sourced directly from MTD, and it is sold individually. It was initially used on snowblowers but has also been used on lawnmowers and lawn tractors.

Ball bearing prevents friction between moving parts in lawn equipment. Replace if worn or damaged to restore smooth wheel or pulley operation. Verify fit.

Sealed ball bearing reduces friction between fixed parts and rotating shafts. Replace if you hear grinding noise or notice wheel wobble. Verify fit.

Flange bearing for lawn tractors and mowers. Replace if you notice wobbling, excessive noise, or difficulty engaging blades. Verify fit with your model.

This is an authentic OEM replacement flange bearing sourced directly from the manufacturer that is a component in many different lawn and garden machines. The flange bearing is used to tightly fit between two connected components. This connection creates an airtight seal. Over time and with normal wear and tear, the flange can become worn and lose the seal. When this happens, the flange will need to be replaced. The flange helps to distribute the weight load in some instances and if it is damaged, the weight would be displaced and could lead to serious energy.Replacement depends on the location of the flange that needs to be replaced. Place the equipment on a flat surface and disconnect the spark plug wire. Take the machine's components off as needed to access the flange and remove it using a pair of pliers. Clean off the components where the bearing was located before installing the new flange bearing. Reassemble the machine using a reverse process.This flange is a heavy-duty part that is sold as an individual item. The flange bearing can be used with lawnmowers and other lawn and garden machines manufactured by Craftsman.

17.90-inch high-lift mower blade for lawn tractors and riding mowers. Replace worn, bent, or dull blades to restore cut quality and deck performance.

This control cable is a genuine Husqvarna part, sold individually. This control cable can be used as a replacement part for a lawnmower or a lawn tractor. This control cable engages the brakes when the cable is pulled and disengages the brakes when the cable is released.If the brake does not respond when the control cable is pulled, the control cable is likely damaged. The control cable can be subject to damage in the form of fraying, puncturing, tearing, ripping, or erosion to the material that can prevent it from serving its function. If this is the case, the component should be removed and replaced by this genuine OEM replacement part. Always remember to wear work gloves as a safety precaution while repairing or replacing parts within an outdoor appliance. This is an OEM part sourced directly from the manufacturer. It is sold individually. This control cable is compatible with the following outdoor appliance brands: MTD, Yard Man, and Troy-Bilt.