Wizard Parts

This is a genuine washer lock that is designed to be used in various applications on lawn and garden equipment. It is a standard piece of hardware that provides a strong seal and distributes pressure between the two connected components. Because of the exposure to high pressure and vibrations, these washers can become damaged or broken over time. If they are not replaced promptly, the connection between the two different parts may be affected. These washers are small and can also get lost while doing other repairs, so it may be helpful to keep some extras on hand. This genuine OEM lock washer is manufactured to exact standards and is compatible with several lawn and garden machines from Husky, Cub Cadet, MTD, RYOBI, Yard Machines, Troy Bilt, Yard Man, and Bolens. It can be used with over 150 models of tractors, blowers, cultivators, trimmers, and snowblowers. Consult the parts diagram for the exact location(s) and application(s) of this washer. Replacing this washer will require a screwdriver or socket set to attach the screws or bolts that the washer is securing. Always wear gloves for hand protection when replacing engine components like this lock washer.

This shoulder screw is a genuine MTD part. It is manufactured as a replacement part for several models of lawn tractors, hi-wheel mowers, lawn tractors, and lawn mowers.Most shoulder screws will last for many years, but this one is made for compatibility with machines made in the 1980s and 1990s. For the machines this old, it is normal for the shoulder screws to become worn.This shoulder screw is a genuine OEM part sourced directly from the manufacturer. It is sold individually, so be sure to check whether more than one needs replacement. It is compatible with machines made by White Outdoor, Yard Machines, Ace, Wizard, Lawn Chief, Huskee, Husky, Statesman, Ranch King, Mastercraft, MTD Pro, Montgomery Ward, Cub Cadet, and Bolens.

This .498 x 1.64-inch wheel shoulder bolt is a genuine OEM part sourced directly from the manufacturer. It is made for use on lawnmowers, edgers, and tillers to fasten the wheel to the frame. Shoulder bolts have three sections: the visible head, an unthreaded section called the shoulder, and the threaded section for locking it in place. The shoulder or unthreaded area allows the wheel to rotate. This shoulder bolt will have a spring washer installed before the wheel is installed. A locking nut is used on the opposite side to ensure the wheel is secure.If the lawnmower wheel or other equipment wheel needs to be replaced or the shoulder bolt becomes rusted, causing friction when pushing the mower, this replacement part is easy to install. First, the nut holding the shoulder bolt and wheel in place is removed with a wrench. The shoulder bolt is then pulled out from the opposite side. Install the new shoulder bolt, followed by the remaining wheel parts. Reinstall the nut to hold the wheel in place.The shoulder bolt is made of high-tensile metal to withstand the friction and weight of the moving machinery. It is designed for use with Craftsman, Cub Cadet, Troy-Bilt, Husky, Yard Machines, MTD, Huskee, Montgomery Wards, Bolens, Yard-Man, and MasterCut lawn mowers, tillers, and edgers. It is sold individually.

This replacement part is a transmission kit. This is a genuine replacement part made by MTD. This kit is used to assist the transmission and allow the part to work properly while the engine is in use. A new transmission kit might be needed if the engine is no longer starting as efficiently as before. This can be due to a worn down transmission and should be replaced. The transmission is a frequently used part in a machine and can easily become damaged after years of normal use. Refer to the proper user guide for more specific instructions on how to replace or repair this part. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.

This replacement part is an axle intended for use in lawn mowers. This is a genuine replacement part made by MTD. Axles help control the wheel so that the user is able to ride straight on riding lawn mowers. This part ensures that the wheels are stationed properly on the appliance.A new axle might be needed if the machine is not driving straight or the axle is not situated appropriately. It is not unusual for this part to require replacement after years of normal use. Be sure the appliance is completely powered down and cooled off before attempting to replace this part. For more detailed instructions on how to replace this specific part, please reference the user guide or manual for the appliance. This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with lawn mowers made by MTD.

This part is a right-hand front axle assembly that is used on lawn tractors. This particular axle is located on the right-hand side at the front of the lawn tractor. An axle is a component to which the lawnmower wheels are fitted. The axle supports the weight of the lawnmower.A new right-hand front axle assembly may be needed if the lawnmower is making a clicking noise when turning, if there is a knocking sound, or if grease can be seen on the inside or on the edge of the tires. The lawnmower operator may also notice excessive vibrations when operating the lawnmower. If this is the case, the axle will need to be replaced. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment. Never perform care and maintenance on outdoor power equipment that is powered on.This part is a genuine MTD part. It is sold individually. This particular right-hand front axle assembly is compatible with lawn tractors that are manufactured by MTD, Ryobi, Yard Machines, Yard-Man, Troy-Bilt, and Husky.

This part is a right-hand axle assembly that is used on lawn tractors. The axle is the component to which the wheels are fitted. The purpose of an axle is to support the weight of the lawn tractor, keep the drive assembly firmly attached to the lawn tractor, and hold the wheels in their proper places.A new right-handle axle assembly may be needed if the original is cracked, broken, or damaged in any way. If the lawn tractor is not cutting the grass evenly, if the lawn tractor is making squealing noises, or if there are excessive vibrations in the unit, then the axle assembly may be needed. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment.This part is a genuine MTD part. It is sold individually. This particular right-handle axle assembly is compatible with lawn tractors that are manufactured by MTD, Turf Power, Hechinger, White Outdoor, Lawn Hawk, Mastercraft, Servistar, Lawn General, Yard Machines, ACE, Agway, Ryobi, Cub Cadet, Troy-Bilt, and Husky.

This axle assembly is a genuine MTD part, sold individually. This axle assembly can be used as a replacement part for lawnmowers. This axle assembly elevates the back of the cutting deck and to maintain the placement of the wheels of the lawnmower.The axle assembly might have to be replaced within the standard lifespan if it can no longer maintain the placement of the lawnmower wheels. This could occur as a result of damage to the axle assembly in the form of puncturing, scraping, tearing, or eroding to the point that the axle assembly is knocked out of place or its attachment to the wheels is severed. If this occurs, the axle assembly should be removed and replaced by this genuine OEM replacement part. Remember to wear work gloves as a safety precaution while repairing or replacing parts within an outdoor appliance. This is an OEM part sourced directly from the manufacturer. It is sold individually. This axle assembly is compatible with the following outdoor appliance brands: MTD and Cub Cadet.