Wizard Parts

Fix tiller belt slipping or drive issues with this replacement drive pulley. Essential component for power transmission in rear-tine and standard tillers.

Replace a worn mandrel pulley causing uneven cuts or blade engagement issues on your lawn tractor. Direct-fit part for multiple MTD tractor models.

This is a genuine OEM engine pulley sourced directly from the manufacturer for use on tiller engines and other engines with a pull start. The starter cord is attached to a pulley that has a spring for rewinding the cord after the engine starts. If the engine pulley is damaged due to rust or corrosion and the string won't pull, the engine won't start. The pulley may make screeching or whining sounds when pulled, this is one way to recognize that the pulley is beginning to go bad and should be replaced soon.Before replacing the pulley, make sure the engine is cool and remove the spark plug. Remove the starter housing to access the rope starter and pulley. Disassemble the pulley system and discard the old pulley. Reinstall the new pulley and thread the starter cord back around it. Reassemble the housing and put the spark plugs back so that you can test the starter. This engine pulley is made of heavy-duty steel and sold as an individual unit. It is designed to be compatible with small engines manufactured by Craftsman.

Tiller won't engage or belt slips? This engine pulley outer half works with the inner half to drive the tines. Moderate DIY repair for tillers.

This replacement part is a pulley. This is a genuine replacement part made by MTD. This part is able to connect multiple pieces together so they can operate smoothly during use. This enables certain parts to work together and run smoothly and effectively over time.A new pulley might be needed if the current one has become worn down or damaged. Pulleys typically experience a large amount of friction during use and can eventually begin to malfunction. If the user notices unusual noises coming from the inside of the machine, it can be due to a pulley that needs attention. Work gloves are recommended during this repair to ensure safety. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.

Idler pulley roller guides and tensions mower deck belts. Replace if worn, cracked, or causing belt slippage. Verify fit with your model number.

Deck skirt installs on the middle section of your mower deck to deflect grass clippings and debris. Replace if cracked, damaged, or missing.

Secures the battery in your lawn tractor or riding mower. Replace if cracked, broken, or missing to prevent battery movement and secure mounting.

Hex nuts are a common type of nut used with bolts, anchors, studs, and screws. These nuts are often present in lawn and garden equipment like lawnmowers. A hex nut has a hexagonal shape with machine screw threads and can be used with lock washers. Hex nuts are made of durable metal but can become damaged, corroded, or even break over time.Visually inspecting the hex nuts on lawn equipment will provide information about whether it's damaged or broken. This might be seen as a dent, a misshapen nut, or a nut that has broken in half. If these things are present, the hex nut will need to be replaced. Remove the hex nut using a socket wrench and socket and then place a new one on the machine. Once it has been situated, tighten the nut so it holds the other parts stable before using the machine.This hex nut is a genuine OEM replacement part sourced directly from the manufacturer. It comes as an individual component. The part can be used in lawnmowers, log splitters, snowblowers, tillers, and string trimmers made by Craftsman, Toro, Cub Cadet, Troy-Bilt, Murray, Yard Machines, MTD, Huskee, Montgomery Wards, Bolens, Yard-Man, and MasterCut.

Cotter pins are simple but very effective fasteners used primarily to hold wheels in place on mowers. This is particularly true of the front wheels on riding mowers. Cotter pins are very light and can become overly pliable after extensive use. In some cases, the front wheels of a mower, which are the guide wheels that steer the device, become difficult to manage. The cure for this situation is often simply the replacement of the cotter pins that are not holding the guide wheels adequately in place. Before attempting to remove the pins, it is essential that the spark plug boot is moved so that the mower cannot be started. This is an important safety step because the repairer will be getting under the mower near the blades. The back wheels should be blocked so the mower cannot move, then the front end placed up on blocks. Remove the mower's hubcaps to gain access to the axle spindles. Straighten the legs of the pin so that when the curved portion of the cotter pin is grasped with pliers and it can be pulled straight back and be removed. The spindle, washers, and wheels should be checked for wear before the new pin is placed and secured. This OEM cotter pin is compatible with Bolens, Yard-Man, Craftsman, Yard Machines, Cub Cadet, Turf King, Troy-Bilt, Huskee, Toro, Ryobi, MTD, MasterCut, Murray, and Montgomery Wards.

Replacement discharge chute deflector assembly for lawn mowers. Installs on the side deck to direct grass clippings. Replace if cracked or broken.

This is a genuine washer lock that is designed to be used in various applications on lawn and garden equipment. It is a standard piece of hardware that provides a strong seal and distributes pressure between the two connected components. Because of the exposure to high pressure and vibrations, these washers can become damaged or broken over time. If they are not replaced promptly, the connection between the two different parts may be affected. These washers are small and can also get lost while doing other repairs, so it may be helpful to keep some extras on hand. This genuine OEM lock washer is manufactured to exact standards and is compatible with several lawn and garden machines from Husky, Cub Cadet, MTD, RYOBI, Yard Machines, Troy Bilt, Yard Man, and Bolens. It can be used with over 150 models of tractors, blowers, cultivators, trimmers, and snowblowers. Consult the parts diagram for the exact location(s) and application(s) of this washer. Replacing this washer will require a screwdriver or socket set to attach the screws or bolts that the washer is securing. Always wear gloves for hand protection when replacing engine components like this lock washer.

Shoulder bolt that secures the wheel to the frame on lawn mowers, edgers, and tillers. Replace if bolt is stripped, broken, or missing for proper wheel attachment.

Replace your worn or damaged 20-inch mower blade with star center hole. Restores cutting performance when the original blade is bent, dull, or broken.