Wizard Parts

This hex screw is a genuine MTD part, sold individually. This hex screw can be used as a replacement part in a lawn mower, snowblower, or wood chipper.The hex screw in a lawn mower, snowblower, or wood chipper might have to be replaced if it is lost, misplaced, or damaged. The screw is a small component which can easily disappear while the appliance is in operation without necessarily noticing its absence; additionally, the screw can suffer from puncturing, scraping, denting, warping, or eroding over time. If this occurs, the screw should be replaced by this genuine OEM replacement part.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This hex screw is compatible with the following outdoor appliance brands: MTD, Cub Cadet, Craftsman, Ryobi, Troy-Bilt, Yard Machines, Huskee, Montgomery Wards, Bolens, Yard Man, and MasterCut.

This replacement part is a hex nut. It is a small but important part of many different types of equipment. Hex nuts are able to work with other small parts such as washers or screws to ensure that pieces in the machine are held together properly and are secure during use.A new hex nut might be needed if the current one is unable to stay in place. If it has become stripped, it is possible that it can no longer perform the actions needed. It is not uncommon that nuts become worn down or lodged into place after years of normal use. This is a genuine OEM replacement part manufactured by MTD. This part is sold individually.

This U-joint is a genuine MTD part, sold individually. This U-joint can be used as a replacement part in a lawn mower or a lawn tractor. The purpose of the U-joint in a lawn mower or a lawn tractor is to couple two components to one another so that rotational motion can be transmitted through the u-joint.The U-joint in a lawn mower or a lawn tractor might have to be replaced if it shows clear symptoms of damage. If the operation of the lawn mower or lawn tractor is jerkier than usual or if there is excessive vibration, the U-joint should be inspected and assessed for damage, and if there is sufficient damage attributable to the U-joint, it should be removed and replaced by this genuine OEM replacement part. This replacement should be executed in accordance with the proper appliance manual from a relevant set of user instructions.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This U-joint is compatible with the following outdoor appliance brands: MTD, Yard Man, and Yard Machines.

This knob is a genuine MTD part, sold individually. This knob can be used as a replacement part in a lawn mower or a log splitter. The purpose of the knob in a lawn mower or a log splitter is to facilitate the turning on and off of certain components within the mechanical infrastructure of the appliance so that the operator can regulate the functions of the lawn mower or log splitter.The knob in a lawn mower or a log splitter might need to be replaced if the component no longer works or responds to the input from the operator. This could occur if the knob is permanently detached from the appliance or if the knob suffers damage in the form of puncturing, cracking, denting, or eroding that cannot be fixed with a basic repair. If this occurs, the knob should be removed and replaced by this genuine OEM replacement part.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This knob is compatible with the following outdoor appliance brands: MTD, Cub Cadet, Yard Machines, Yard Man, Huskee, and MasterCut.

This amp fuse is a genuine MTD part, sold individually. This amp fuse can be used as a replacement part in a lawn mower. The purpose of the amp fuse in a lawn mower is to protect the lawn mower from potential voltage issues and failures that might occur during the general use of the appliance.The amp fuse in a lawn mower might need to be replaced if the component suffers damage or blows out after protecting the appliance from an electrical current voltage overload. If the amp fuse has blown or has suffered damage from general wear and tear with long-term use, the amp fuse should be removed and replaced by this genuine OEM replacement part in order to guarantee continued safe use of the lawn mower by the operator. Always unplug the appliance before performing any kind of repair or replacement.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This amp fuse is compatible with the following outdoor appliance brands: MTD, Cub Cadet, and Troy-Bilt.

This replacement part is a monitor indicator. This is a genuine replacement part made by MTD. This part is typically found in equipment where the user is able to adjust certain settings during use. The monitor is able to display the information so that the user is aware of the settings during use. A new monitor indicator might be needed if the current one is no longer working. If the monitor is not connected to the engine, it can have trouble transmitting the details to be displayed on the monitor. If this part is damaged or too dirty to see the information, it should be replaced so that the user is able to view the settings. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.

This replacement part is an insulator plate. It is a genuine replacement part made by MTD. This small part is important to the overall operation of many different machines. It helps to insulate other parts inside the machine as well as allow them space to operate. A new insulator plate might be needed if the current one is missing or damaged in any way including being dented, cracked, chipped, or bent. This can be due to normal wear and tear as it is common that parts become broken overtime. Be sure to refer to the correct owner's manual before attempting to replace this part. This part is a genuine OEM replacement part. This insulator plate is sold individually and is sourced directly from the manufacturer to ensure a proper fit and long-lasting use.

This fuse holder is a genuine MTD part, sold individually. This fuse holder can be used as a replacement part in a lawn mower. The purpose of a fuse holder in a lawn mower is to provide a safe and reliable pathway for the electrical current running through the lawn mower and sourcing the power for many of its important components.The fuse holder in a lawn mower might have to be replaced if the component can no longer facilitate the reliable transmission of electrical voltage during the typical operation of the appliance. If the fuse holder has been blown, has melted, or is otherwise damaged, the fuse holder should be removed and replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This fuse holder is compatible with the following outdoor appliance brands: MTD, Craftsman, and Cub Cadet.

This is a replacement transmission cover part for a walk-behind lawn mower or a riding lawn tractor. The transmission helps provide controlled power to the engine and overall machine, so it is important to keep it safe. The cover is a durable plastic that fits around the transmission itself, and is really easy to replace.Over time and through potential mowing over damaging material, the cover can break or crack. This depends on the mower, storage, and the terrain it is used on. For mowers used on normal grass lawns and are stored indoors and out of sunlight might need transmission covers less often than mowers used on silty grasslands or those that are kept out in the sunlight. Replacing the cover is simple, and requires a screwdriver, pliers, a drill, and a pair of durable gloves. The replacement requires some disassembly of the lawn mower and its inner workings.This is a genuine OEM replacement transmission cover. This part is compatible with MTD, Yard Machine, Troy-Bilt, Bolens, Yard Man, and Husky machines, depending on the model. This part is sold separately.

This part is a replacement rear flap assembly. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. It is intended to replace a defective, detached, or broken rear flap assembly in various models of lawn mower.The rear flap assembly protects the user from dirt and debris that may be kicked up by the rear wheels of the mower during use. This part is subject to wear and tear and should be replaced if worn out or broken. Wear work gloves to protect the hands and check that equipment is powered off and cooled down before starting the repair process. For more accurate information on how and where to use this rear flap assembly, the appropriate owner's manual and equipment diagrams should be referred to. This rear flap assembly is a genuine OEM part made of durable materials and is sold individually. It is suitable for use with lawn tractor models that have been manufactured by MTD, Craftsman, and other brands.

This genuine OEM part is a compression spring for a lawnmower. The compression spring is the spring that holds the mower deck onto the lawnmower. Over time, the compression spring can become degraded due to excessive wear and tear. If it is no longer securing the mower deck, it will need to be replaced. Luckily, replacing this part is a relatively simple process.To replace the spring, make sure the mower deck is set to the lowest position. Locate the old retainer spring and pull it out and away from the mower. Once removed, slide the new spring into its proper position. Make sure it fits tightly, and the mower deck is secured. Once secured, power the mower to see if the spring stays in place during operation. If it does, then the installation was a success. This replacement part is sold individually and is compatible with MTD brand lawnmowers.