Wizard Parts

This is a replacement transmission cover part for a walk-behind lawn mower or a riding lawn tractor. The transmission helps provide controlled power to the engine and overall machine, so it is important to keep it safe. The cover is a durable plastic that fits around the transmission itself, and is really easy to replace.Over time and through potential mowing over damaging material, the cover can break or crack. This depends on the mower, storage, and the terrain it is used on. For mowers used on normal grass lawns and are stored indoors and out of sunlight might need transmission covers less often than mowers used on silty grasslands or those that are kept out in the sunlight. Replacing the cover is simple, and requires a screwdriver, pliers, a drill, and a pair of durable gloves. The replacement requires some disassembly of the lawn mower and its inner workings.This is a genuine OEM replacement transmission cover. This part is compatible with MTD, Yard Machine, Troy-Bilt, Bolens, Yard Man, and Husky machines, depending on the model. This part is sold separately.

This part is a replacement rear flap assembly. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. It is intended to replace a defective, detached, or broken rear flap assembly in various models of lawn mower.The rear flap assembly protects the user from dirt and debris that may be kicked up by the rear wheels of the mower during use. This part is subject to wear and tear and should be replaced if worn out or broken. Wear work gloves to protect the hands and check that equipment is powered off and cooled down before starting the repair process. For more accurate information on how and where to use this rear flap assembly, the appropriate owner's manual and equipment diagrams should be referred to. This rear flap assembly is a genuine OEM part made of durable materials and is sold individually. It is suitable for use with lawn tractor models that have been manufactured by MTD, Craftsman, and other brands.

This genuine OEM part is a compression spring for a lawnmower. The compression spring is the spring that holds the mower deck onto the lawnmower. Over time, the compression spring can become degraded due to excessive wear and tear. If it is no longer securing the mower deck, it will need to be replaced. Luckily, replacing this part is a relatively simple process.To replace the spring, make sure the mower deck is set to the lowest position. Locate the old retainer spring and pull it out and away from the mower. Once removed, slide the new spring into its proper position. Make sure it fits tightly, and the mower deck is secured. Once secured, power the mower to see if the spring stays in place during operation. If it does, then the installation was a success. This replacement part is sold individually and is compatible with MTD brand lawnmowers.

This replacement part is a torsion spring. This is a genuine replacement part made by MTD. This particular spring is found in riding lawnmowers and is responsible for connecting and controlling different parts within the engine.A new spring might be needed if the current spring is missing. If the spring is snapped it should also be replaced as soon as possible. The repair for this part should be fairly simple and only require common household tools. Be sure to wear work gloves during this repair to prevent injury. This part is sold individually and is sourced directly from the manufacturer. This part is a genuine OEM replacement part to ensure proper fit.

This replacement part is an extension spring, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by MTD. An extension spring, which can also sometimes be referred to as a tension spring, creates tension inside of the device and aids it in running smoothly and efficiently. A new extension spring might be needed if the user notices that the mower's engine is no longer working properly. If there are unusual noises coming from inside of the device, it's possible that the extension spring is malfunctioning. The spring can be stripped and snap over time. Always shut the engine down before attempting to replace any part of a lawn mower. This spring is a genuine OEM replacement part and is sourced directly from the manufacturer. This spring is sold individually so be sure to purchase the proper amount.

This replacement part is an extension spring and is intended for use in different types of lawn equipment. This is a genuine replacement part made by MTD. This extension spring is found in different types of lawn mowers and helps other parts to work together and allow the engine to run properly and smoothly.A new extension spring might be needed if the current one is damaged or missing from the appliance. Because of the nature of the extension spring, it is not unusual for it to become stripped or snapped due to normal wear and tear within the machine. Unusual sounds may come from inside the machine if this spring is not working properly. This is a genuine OEM replacement part and is sold individually. This spring is sourced directly from the manufacturer to ensure proper fit.

This replacement part is a washer. This is a genuine replacement part made by MTD. A washer is a small part but important to the overall workings of the machine. Washers work with other small pieces such as nuts and screws to keep parts in place and in proper working order.A new washer might be needed if the current one is missing or damaged in any way. This can be caused by normal wear and tear. Washers may experience a large amount of friction over time and can become stripped down after a while. If this is the case, be sure the replace the part as it might not be as effective as during prior uses. This part is sold individually and is sourced directly from the manufacturer. This is a genuine OEM replacement part.

This replacement part is a washer. This is a genuine replacement part made by MTD. This part is small but important in many different types of machinery and appliances. Washers work together with other small parts like screws to help keep pieces attached securely and safely. A new washer might be needed if the current one is missing or damaged. It is possible that over time washers can become worn down due to friction coming from the parts around them. If this is the case, it is recommended that it be replaced. Be sure to purchase the correct amount of washers as many appliances require more than one to operate effectively. This part is sold individually and is sourced directly from the manufacturer. This part is a genuine OEM replacement part to ensure proper fit and long-lasting use.

This part is a replacement washer. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can be used to replace a broken, lost, or defective flat washer in a variety of outdoor power equipment. Washers are a standard piece of hardware with a wide variety of uses. They can be used with various equipment components to ensure they are secured properly together by providing a greater surface bearing area for screws and bolts. When working on or near an engine, it's important to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this washer, the appropriate owner's manual and equipment diagrams should be utilized.As an authentic replacement part, this washer is suitable for use on several different models of line outdoor power equipment manufactured by MTD, Craftsman, Troy-Bilt, and other brands. This is a genuine part made of high-quality, durable metal and is sold individually.

This replacement part is a washer. This is a genuine replacement part made by MTD. This particular washer is a very important part of various machinery and appliances. These small parts are able to work together to help ensure the proper functioning of the machine. It also allows for parts to stay in place during use. A new washer might be needed if the current one is missing or damaged. washers can become stripped and might not stay in place after a while. If this is the case it is recommended that it be replaced immediately. This repair should be fairly easy and only require common household tools. Be sure to wear work gloves during this repair. This part is sold individually and is sourced directly from the manufacturer to ensure proper fit. This washer is a genuine OEM replacement part.

This part is a replacement shaft. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can be used to replace a broken or defective shaft in a variety of tiller models.The shaft is critical to proper tiller function but can become damaged, dented, bent, or otherwise rendered ineffective, particularly with regular equipment use on rough terrain. Thus, the shaft will need to be replace for the tiller to function as intended. It's important when working on or near to an engine to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this shaft, the appropriate owner's manual and equipment diagrams should be utilized.As an authentic replacement part, this shaft is suitable for use on several different models of tillers manufactured by MTD, Craftsman, and other brands. Please This is a genuine part made of high-quality, durable materials and is sold individually.

This shoulder screw is a genuine MTD part, sold individually. This shoulder screw can be used as a replacement part in a lawn mower. The purpose of the shoulder screw in a lawn mower is to serve as a fastening component within the internal machinery of the appliance so that when the screw is pierced through and rotated into one or more components, those components are effectively secured in their position within the appliance while the appliance is in operation.The shoulder screw in a lawn mower might need to be replaced if the shoulder screw is lost, misplaced, or damaged as a result of general wear and tear from long-term use. If the shoulder screw is lost at some point within the typical lifespan of a lawn mower, the shoulder screw should be replaced by this genuine OEM replacement part; the same should occur if the screw is stripped away from general use.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This shoulder screw is compatible with the following outdoor appliance brands: MTD, Yard Machines, Montgomery Wards, Yard Man, and MasterCut.

This is a thrust bearing. The thrust bearing is positioned between the lawn mower's spindle and front axle and serves to reduce friction during use. This part makes shifting between different speeds much easier. A worn-out thrust bearing will have more room between the rollers on the outside of the bearing. This movement will cause the bearing to move more than usual. When the bearing goes bad, the driver may notice rattling, squeaking, or other noises coming from the machine. These noises can be more prevalent when the clutch pedal is engaged. To replace the thrust bearing, first, the clutch must be removed from the lawn mower. On the bottom of the driveshaft, there is a bolt and washer that need to be removed. Wedge and move the clutch, allowing it to work its way down the driveshaft, then remove it. There is a bearing retainer clip and three bolts that will enable the thrust bearing to be removed. Repeat the steps in reverse after installing the new component.This product is a genuine OEM MTD part sourced directly from the manufacturer. The part is sold individually and not available with any other components. This product is compatible with MTD and Cub Cadet products.